A portable spectrometric system for nondestructive assessment of the soluble solids content (SSC) of fruits for practical applications has been proposed and its performance has been examined by an experiment on quantitative prediction of the SSC of apples. Although the spectroscopic technique is a powerful tool for predicting the internal qualities of fruits, its practical applications are limited due to its high cost and complexity. In the proposed system, the spectra of apples were collected by a simple optical setup with a cheap pre-calibrated multispectral chipset. An optimal multiple linear regression model with five wavebands at 900, 760, 730, 680, and 535 nm revealed the best performance with the coefficient of determination of prediction and the root mean square error of prediction of 0.861 and 0.403 °Brix, respectively, which was comparable to that of the previous studies using dispersive spectrometers. Compared with previously reported systems using discrete filters or light emitting diodes, the proposed system was superior in terms of manufacturability and reproducibility. The experimental results confirmed that the proposed system had a considerable potential for practical, cost-effective applications of the SSC prediction, not only for apples but also for other fruits.
Before being exported, mangoes generally undergo rigorous external and internal quality inspection processes in which near-infrared (NIR) spectral approaches are favorable for grading purposes. A successful NIR-based grading system depends largely on high-quality spectral sensors and the reliability of the classifier. Motivated by the high economic impact of Cat Hoa Loc mangoes (Mangifera indica L.), we demonstrated that the sweetness of that mangoes could be precisely graded based on a random forest (RF) classifier in a three-phase approach with a low-cost Visible-Near infrared (VIS-NIR) multispectral sensor chipset. This approach is so-called RPR because RF, Partial Least Squares regression, and RF were respectively applied to consecutively determine the significant VIS-NIR responses, the good features as input variables, and the reliable RF classifier via our formulated discriminant index (DI). The experimental results confirmed that higher classification accuracy was achieved by using the extracted latent features rather than the raw VIS-NIR data. The DI was effectively used as a reliability measure to select the optimal classifier among those of identical training and testing accuracies of 100% and 82.1%, respectively. Performance comparison between the optimal RF classifier with a Support Vector Machines classifier and a multinomial logistic regression showed that the developed RF classifier was superior in various performance indices. Therefore, it is promising to extend the proposed approach to more complicated fruit grading problems with sufficient VIS-NIR datasets that are acquired from low-cost multispectral sensors.
By combining an optimally-trained classifier with a simple spectrometric system developed by ourselves, the sweetness of apples has been classified nondestructively with high accuracy and precision. A simple spectrometric system is practical in principle, but its manufacturability and reproducibility were somehow limited in the previous studies because they were based on discrete components such as filters or LEDs. High manufacturability and reproducibility of our developed system were already reported, but the performance of sweetness grading was not examined. In this study, the best performance of 91.3% accuracy and 91.5% precision was obtained from a discriminant analysis (DA) model that was trained with the spectral response of apple at five wavebands (535, 680, 730, 760, and 900 nm) selected with a sequential forward selection (SFS) algorithm. The performance level was superior to that of the previous studies on their simple spectrometric systems. From the achieved performance and evaluated computational complexity, it can be concluded that the combination of a machine learning-based classifier and our simple spectrometric system is effective for fruit quality assessment and especially suitable for cost-effective applications.