Methyl ammonium antimony iodide (MA3Sb2I9) perovskite-like materials have gained enormous attention from the scientific community because of their excellent aerobic stability, good optical properties, and less-toxic nature. Herein, we report on the simulation of FTO/TiO2/MA3Sb2I9/spiro-OMeTAD via solar cell capacitance (SCAPS) software. The thickness of the absorber layer, hole-transport layer, or electron-transport layer may significantly impact the photovoltaic performance of the perovskite solar cells (PSCs). In this connection, the thickness of the absorber layer, hole-transport layer, or electron-transport layer was varied during the simulation process and the optimized PSCs demonstrated a good efficiency of 14.90% including an excellent open circuit voltage (Voc) of 1.41 V. Furthermore, we also fabricated MA3Sb2I9-based PSCs and their photovoltaic performance was evaluated. The fabricated PSCs showed a reasonably good efficiency of 1.27% and Voc of 0.51 V.
A new cobalt(II) coordination polymer ‘Cp-Co’ has been designed and synthesized. The construction includes cobalt(II) as the central metal core along with 1,4-benzenedicarboxylic acid and the spacer 3,5-diamino-1,2,4-triazole obtained by a solvothermal method. The architecture of ‘Cp-Co’ was established using single X-ray crystallography and the topology of the coordination polymer. The ‘Cp-Co’ exhibited a periodic 3D framework. Furthermore, infrared spectroscopy (FT-IR), powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET) analysis further supported the structure of ‘Cp-Co’. The prepared material was explored as a catalyst for the photocatalytic degradation of methyl green (MG) dye and displayed outstanding degradation efficiency under visible light radiation. The experimental design was explored towards optimization of the reaction variables, such as catalyst dose, MG dye concentration, etc. It was found that 10 mg of Cp-Co with 150 mg L−1 MG resulted in 99.77% photocatalytic efficiency within 60 min of visible light irradiation. The kinetic data was simulated using the Langmuir–Hinshelwood kinetic model and the value of the apparent rate constant (Kapp) was found to be 0.020 min−1, 0.024 min−1 and 0.029 min−1 for 50, 100 and 150 mg L−1 MG concentrations. The trapping experiments suggested the involvement of a superoxide anion radical (O2−˙) in the degradation of MG.
Luminescent sensing of volatile organic solvents (VOCs), anions, cations, etc., and photocatalysts for aromatic dyes are two of the many emerging applications for metal-organic frameworks and coordination polymers (MOFs/CPs).
A graphene oxide (GO/CdS) nanocomposite was synthesized by an in situ hydrothermal process and studied to develop a micro solid phase extraction procedure. Microscopic and spectroscopic characterizations have confirmed the successful preparation of the GO/CdS composite. The prepared nanocomposite selectively extracts Hg(II) ions from various water samples (tap, river, and groundwater). The intriguing characteristic of GO sheets is to provide exceptional hydrophilicity and Hg(II) accessibility to surface-decorated CdS nanoparticles. The GO/CdS nanocomposite shows excellent extraction of trace Hg(II) in a short interval of time. Computations based on density functional theory (DFT) suggest that energetically favorable multinuclear S-Hg binding leads to rapid adsorption with high sorption capacity at GO/CdS sites. The analytical features of merit suggested that the developed method has a low detection limit (0.07 µg L−1) and shows good accuracy and precision (with RSD 3.5%; N = 5). The developed method was verified by analyzing SRM 1641d (Standard Reference Material) and real samples after spiking to a predetermined amount.