Titanium investment casting is one of the leading and most efficient near-net-shape manufacturing processes, since complex shape components are possible to obtain with a very low amount of material waste. But melting these reactive alloys implies the usage of specific melting technologies such as the Induction Skull Melting (ISM) method. In this work the ISM was extensively studied with the aim of deepening the characteristics of this specific melting method and improving the too low energy efficiency and overall process performance. A 16 segment copper crucible and 3 turns coil was employed for the melting of 1 kg of Ti-6Al-4V alloy. Through the calorimetric balance, real-time evolution of the process parameters and power losses arising from the crucible and coil sub-assemblies was displayed. Results revealed the impact of coil working conditions in the overall ISM thermal efficiency and titanium melt properties, revealing the use of these conditions as an effective optimization strategy. This unstudied melting control method allowed more heat into charge and 13% efficiency enhancement; leading to a shorter melting process, less energy consumption and increased melt superheat, which reached 49 °C. The experimental data published in this paper represent a valuable empiric reference for the development and validation of current and future induction heating models.
This study investigates fixed and moving mesh methodologies for modeling liquid metal–free surface deformation during the induction melting process. The numerical method employs robust coupling of magnetic fields with the hydrodynamics of the turbulent stirring of liquid metal. Free surface tracking is implemented using the fixed mesh level set (LS) and the moving mesh arbitrary Lagrangian–Eulerian (ALE) formulation. The model’s geometry and operating parameters are designed to replicate a semi-industrial induction melting furnace. Six case studies are analyzed under varying melt masses and coil power levels, with validation performed by comparing experimentally measured free surface profiles and magnetic field distributions. The melt’s stirring velocity and recirculation patterns are also examined. The comparative analysis determines an improved performance of the ALE method, convergence, and computational efficiency. Experimental validation confirms that the ALE method reproduces the free surface shape more precisely, avoiding unrealistic topological changes observed in LS simulations. The ALE method faces numerical convergence difficulties for high-power and low-mass filling cases due to mesh element distortion. The proposed ALE-based simulation procedure is a potential numerical optimization tool for enhancing induction melting processes, offering scalable and robust solutions for industrial applications.
12 January 2012 in IOP Conference Series: Materials Science and Engineering
Investment casting of magnesium is a well suited process for the production of aeronautic and automotive components. But still, this process has not been properly developed. One reason for that are the reactions between the Mg melt and the ceramics of the mould that produce a non-desired oxide layer on the part surface. These reactions can be inhibited by the use of silica-free slurries with a higher stability than conventional ones. Another way is using inhibitors, chemical compounds based in fluorides that react with the melt, creating a protective surface layer in the casting. With the aim of developing a reaction-free process, alumina moulds with a stepped geometry have been constructed. These provide different interface conditions. Conventional SF6, non-conventional KBF4 and NaBF4 and environmentally friendly FK inhibitors have been tested on. As a result, KBF4 has been identified as the most suitable inhibitor for magnesium investment casting. Furthermore, the analysis of the cooling curve of different interfaces has provided essential information about the reaction mechanism of the inhibitors.
17 October 2017 in International Journal of Material Forming