Osama Ali

Mr. Osama Ali

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 May 2025 in Processes
Verified
Journal Article
Open access
PDF file
Osama AliOsama Ali
Osama Ali
Dong-Won JungDong-Won Jung
Dong-Won Jung
JJJi Hyun Jeong
Ji Hyun Jeong
Ball screws play an important role in machine tools by converting rotational motion into precise linear motion. This study evaluates and compares ball screws from two companies (TIC and NSK) through simulations and experimentation to assist in the selection process. Simulation results show that TIC exhibits a lower maximum temperature (32.6 °C) and axial deformation (119.3 μm) compared to NSK (34.05 °C and 174 μm, respectively), indicating superior thermal performance and deformation properties. An accelerated life test conducted over 240 h further demonstrates that TIC maintained more stable temperatures during continuous operation. Additional tests on the TIC ball screw include thermal displacement which is 13.5 μm after 2000 cycles of reciprocating motion. Friction torque fluctuation rate which ranges from 11.6% to 19.9%, and test bench positioning repeatability experiment shows a mean deviation of 4.99 μm from the target position. Overall, the results from this work contribute to process optimization by guiding the selection of ball screws based on their thermal performance and durability, ultimately enhancing machine tool accuracy and reliability.

22 June 2026 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
Osama AliOsama Ali
Osama Ali
ANAtif Niaz
Atif Niaz
Dong-Won JungDong-Won Jung
Dong-Won Jung
Wire Electrical Discharge Machining (WEDM) is a non-traditional machining method for fabricating hard and conductive materials. This study investigates the influence of four key process parameters such as pulse on-time, pulse off-time, wire feed rate, and current on machining performance using stainless steel 316. The effect of these process parameters is studied in terms of volumetric material removal rate (VMRR), surface roughness (Ra), and side gap. Experiments were conducted using a CNC WEDM setup, and the results were analyzed using Response Surface Methodology (RSM) via Minitab 17 to develop regression models. The results show that wire feed and the current predominantly influence VMRR, pulse on-time has the strongest effect on Ra, while pulse off-time and the current are most significant for controlling side gap. The study offers a data-driven reference for optimizing WEDM process while contributing to improved machining performance, energy efficiency, and surface integrity to machine hard materials.

21 January 2026 in Actuators
Verified
Journal Article
Open access
PDF file
Osama AliOsama Ali
Osama Ali
ANAtif Niaz
Atif Niaz
OSAMA ABDELALEEM SALEMOSAMA ABDELALEEM SALEM
OSAMA ABDELALEEM SALEM
AKAnisha Karki
Anisha Karki
TATING AI
TING AI
JJJi Hyun Jeong
Ji Hyun Jeong
This study presents a comprehensive thermo-structural and modal analysis of a ball screw assembly. Thermal analysis revealed a maximum temperature of 29.1 °C at the ball nut, corresponding to a total rise of 7.1 °C above ambient. The resulting thermal deformation reached 77.81 μm, while the von Mises stress peaked at 53.9 MPa, both within acceptable limits. Modal simulation of 360 modes showed a sharp increase in frequency with mode number and larger deformation patterns at the higher modes. The first two modes dominate the effective mass with the first 8 modes capturing over 90% of the cumulative effective mass. Overall, the results demonstrate stable thermal performance, limited deformation, low stress, and controlled vibrations, confirming the modeling approach and the suitability of 42CrMo4 steel for high-precision ball screw assemblies.