The penetration level of plug-in electric vehicles (PEVs) has the potential to be notably increased in the near future, and as a consequence, power systems face new challenges and opportunities. In particular, PEVs are able to provide different types of power system ancillary services. The capability of storing energy and the instantaneous active power control of the fast-switching converters of PEVs are two attractive features that enable PEVs to provide various ancillary services, e.g., primary frequency control (PFC). However, concurrently, PEVs are obliged to be operated and controlled within limits, which curbs the grid support from PEVs. This paper proposes a new model for PEV using a participation factor, which facilitates the incorporation of several PEV fleets characteristics such as minimum desired state of charge (SOC) of the PEV owners, drive train power limitations, constant current and constant voltage charging modes of PEVs. In order to reduce computational complexity, an aggregate model of PEVs is provided using statistical data. In the end, the performance of PEVs for the provision of PFC is evaluated in a power system. Results show that PEV fleets can successfully improve frequency response, once all the operating constraints are respected.
8 January 2007 in IEEE Transactions on Power Electronics
This paper presents the detailed design, analysis, and application of the controller for a shunt active power filter based on a pulsewidth modulation dc-to-ac voltage source converter. The controller is mainly tailored to compensate harmonic currents of nonlinear loads connected to the mains. However, it can also achieve reactive-power compensation and mains-current balancing when required. The controller has a two-layer structure. The outer layer generates the current references for the inner layer. The former uses a plug-in discrete-time repetitive algorithm for current-harmonic compensation, a proportional-integral algorithm to maintain the dc-capacitor voltage in spite of unmodeled losses and a reactive-power-reference generator. The inner layer uses state-feedback with integral action for current control. The repetitive controller is justified to improve the tracking of the periodic current references required by the active filters. The stability of the resulting closed-loop system is studied and some indication of the system robustness is given. The proposed controller has been tested in a prototype with balanced and unbalanced nonlinear loads. A discrete-time model of the filter has been used from the beginning. The microcomputer delay when calculating the controller output and the delay due to the anti-aliasing filters have been included in the inner system state-variable model
1 January 2000 in IEEE Transactions on Power Delivery
The always-increasing switching frequency of modern solid-state power switches, together with the application of multi-converter topologies, make it possible to use pulse width modulation (PWM) in high power applications of STATCOMs (static synchronous compensators). This paper investigates the control system for a PWM-based STATCOM. First of all, a discrete-time model of the STATCOM is derived to take into account the discrete-time implementation of the controller. Secondly, the control algorithm is detailed. It ensures decoupled control of the real and reactive power exchanged between the power converter and the electric-energy system. This is necessary to control the DC capacitor voltage during transients of the exchanged reactive power. Finally, the control of the capacitor voltage is explained in detail. The controller is tailored to keep the capacitor voltage almost constant in spite of the fast control of the reactive power. This helps to reduce the capacitor size significantly. The main contributions are illustrated using a 15 kVA laboratory prototype.
9 September 2015 in IEEE Transactions on Power Systems
In the future, the number of plug-in electric vehicles (PEVs) that will participate in the primary frequency control (PFC) is likely to increase. In our previous research, the computational complexity of the PFC problem for a large number of PEVs was reduced using aggregate models of PEVs. However, in the literature on the PFC, the distribution network characteristics have not been included in the aggregate models of PEVs for the PFC, despite the fact that PEVs will be dispersedly connected to the distribution network. This paper proposes an aggregate model of PEVs for the PFC that further incorporates distribution network characteristics, i.e., the distribution network power loss (DNPL) and the maximum allowed current (MAC) of the lines and transformers. The DNPL variation is formulated according to the line and transformer impedance, spatial distribution of PEVs and loads, and active power variation of PEVs. Then, DNPL variation together with the MAC of the lines and transformers are incorporated in the proposed model of PEVs. Finally, the simulation results show an excellent agreement of 98% between the detailed model and the proposed aggregate model of PEVs.
Flexibility of distributed energy resources is increasingly needed in the electricity markets and grids. But this dispersed flexibility can be used efficiently only if it is aggregated to wholesale market products. A set of software tools was developed for an actor or a company who aggregates flexible household demand for the electricity market and network operators. The tools comprise 1) short term forecasting of electricity market prices, 2) forecasting loads and their responses to control signals, 3) optimal selection of the control signals and consequently also the responses in each situation, 4) relevant external interfaces, and 5) a database and coordinating logic that integrate the tools into toolbox software. In addition to the operational time horizon tools also tools were considered for longer term decision making such as support for development of a portfolio of retail and wholesale market contracts in order to manage risks and maximize the value of flexibility.