Accurate load modeling is essential for power system stability analysis and control. This topic has regained interest, due to the high penetration of new types of loads and the increased availability of measurements in extended power grids. In this paper, an aggregated load model based on measurement data is formulated for dynamic simulations of large power systems. The proposed model employs variable-order transfer functions, enabling the accurate simulation of complex load dynamics. A complete methodology for the automatic derivation of the minimum-required model order is proposed with the model parameters calculated via a robust multi-signal identification procedure. For this purpose, the Vector Fitting method is introduced as a technique for measurement-based load modeling. Several simulations are performed using the NEPLAN software to investigate the accuracy and the generalization capabilities of the proposed model. The model performance is thoroughly compared with other conventional load models, using also measurements recorded on a laboratory-scale microgrid.
Narrowband power-line communication (PLC) over distribution networks is gaining the attention of researchers, as a communication medium in future power grids. This paper investigates the application of narrowband PLC in smart distribution grids, starting from a historical overview on the accomplished technological progress and continuing with a comparison of the advantages and drawbacks of PLC technology to other smart-grid communication solutions. The analysis shows that narrowband PLC applications are best suitable for medium-voltage (MV) networks, due to the vast and complex geographical extent. The channel and topological characteristics of MV distribution networks are examined for different operational states and configurations, since they are important for the optimal design and implementation of the PLC infrastructure. The analysis is also extended to an existing overhead MV distribution network with distributed-generation units. The obtained results and the proposed methodology are useful and comprehensive tools for the efficient implementation of PLC technology in future smart grids.
29 January 2018 in IEEE Transactions on Smart Grid
In this letter, a new methodology is proposed to extend the applicability of conventional power flow methods to islanded microgrids (MGs), operating with the droop control method. A slack bus is considered to be connected at a random MG node. The operational conditions of this slack bus as well as of the rest MG nodes are determined through an iterative procedure. The objective of this procedure is to force the active and reactive power flowing through the slack bus to zero, representing the islanded MG operation. The proposed approach has a similar accuracy with time-domain simulations, while it reduces significantly the required computational burden.
22 March 2010 in IEEE Transactions on Power Delivery
A general formulation for the calculation of the influence of the earth return path on the impedances and the admittances of underground multiconductor power cable arrangements is presented in this paper. The expressions for the self and mutual earth correction terms are derived by a rigorous solution of the electromagnetic-field equations. The involved semiinfinite integrals are calculated by using a suitable numerical integration technique. The propagation characteristics of a single insulated conductor and of a typical three-phase single-core cable arrangement are investigated and are compared to the corresponding ones obtained by other approaches. Finally, the cable parameters calculated by the proposed method are used in a simulation of a fast transient in a three-phase single-core cable.