Izabela Piasecka

Prof. Izabela Piasecka

Faculty of Mechanical Engineering, University of Science and Technology in Bydgoszcz

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 March 2020 in Energies
Verified
Journal Article
Open access
PDF file
Izabela PiaseckaIzabela Piasecka
Izabela Piasecka
PBPatrycja Bałdowska-Witos
Patrycja Bałdowska-Witos
KPKatarzyna Piotrowska
Katarzyna Piotrowska
ATAndrzej Tomporowski
Andrzej Tomporowski
During the conversion of solar radiation into electricity, photovoltaic installations do not emit harmful compounds into the environment. However, the stage of production and post-use management of their elements requires large amounts of energy and materials. Therefore, this publication was intended to conduct an eco-energy life cycle analysis of photovoltaic power plant materials and components based on the LCA method. The subject of the study was a 1 MW photovoltaic power plant, located in Poland. Eco-indicator 99, CED and IPCC were used as calculation procedures. Among the analyzed elements of the power plant, the highest level of negative impact on the environment was characterized by the life cycle of photovoltaic panels stored at the landfill after exploitation (the highest demand for energy, materials and CO2 emissions). Among the materials of the power plant distinguished by the highest harmful effect on health and the quality of the environment stands out: silver, nickel, copper, PA6, lead and cadmium. The use of recycling processes would reduce the negative impact on the environment in the context of the entire life cycle, for most materials and elements. Based on the results obtained, guidelines were proposed for the pro-environmental post-use management of materials and elements of photovoltaic power plants.

10 January 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Izabela PiaseckaIzabela Piasecka
Izabela Piasecka
ATAndrzej Tomporowski
Andrzej Tomporowski
Józef FlizikowskiJózef Flizikowski
Józef Flizikowski
WKWeronika Kruszelnicka
Weronika Kruszelnicka
Robert KasnerRobert Kasner
Robert Kasner
Adam Szymon MrozińskiAdam Szymon Mroziński
Adam Szymon Mroziński
This study deals with the problems connected with the benefits and costs of an offshore wind power plant in terms of ecology. Development prospects of offshore and land-based wind energy production are described. Selected aspects involved in the design, construction, and operation of offshore wind power plant construction and operation are presented. The aim of this study was to analyze and compare the environmental impact of offshore and land-based wind power plants. Life cycle assessment analysis of 2-MW offshore and land wind power plants was made with the use of Eco-indicator 99 modeling. The results were compared in four areas of impact in order to obtain values of indexes for nonergonomic (impact on/by operator), nonfunctional (of/on the product), nonecological (on/by living objects), and nonsozological impacts (on/by manmade objects), reflecting the extent of threat to human health, the environment, and natural resources. The processes involved in extraction of fossil fuels were found to produce harmful emissions which in turn lead to respiratory system diseases being, thus, extremely dangerous for the natural environment. For all the studied areas, the impact on the environment was found to be higher for land-based wind power plants than for an offshore wind farm.

4 November 2022 in Materials
Verified
Journal Article
Open access
PDF file
KPKatarzyna Piotrowska
Katarzyna Piotrowska
Izabela PiaseckaIzabela Piasecka
Izabela Piasecka
ZKZbigniew Kłos
Zbigniew Kłos
Andrzej MarczukAndrzej Marczuk
Andrzej Marczuk
Robert KasnerRobert Kasner
Robert Kasner
The conversion of kinetic energy from wind and solar radiation into electricity during the operation of wind and photovoltaic power plants causes practically no emissions of chemical compounds that are harmful to the environment. However, the production of their materials and components, as well as their post-use management after the end of their operation, is highly consumptive of energy and materials. For this reason, this article aims to assess the life cycle of a wind and photovoltaic power plant in the context of the sustainable development of energy systems. The objects of the research were two actual technical facilities—a 2 MW wind power plant and a 2 MW photovoltaic power plant, both located in Poland. The analysis of their life cycle was carried out on the basis of the LCA (life-cycle assessment) method, using the ReCiPe 2016 calculation procedure. The impact of the examined renewable energy systems was assessed under 22 impact categories and 3 areas of influence (i.e., human health, ecosystems, and resources), and an analysis was conducted for the results obtained as part of three compartments (i.e., air, water, and soil). The life cycle of the wind power plant was distinguished by a higher total potential negative environmental impact compared to the life cycle of the photovoltaic power plant. The highest levels of potential harmful impacts on the environment in both life cycles were recorded for areas of influence associated with negative impacts on human health. Emissions to the atmosphere accounted for over 90% of all emissions in the lifetimes of both the wind and the photovoltaic power plants. On the basis of the obtained results, guidelines were proposed for pro-ecological changes in the life cycle of materials and elements of the considered technical facilities for renewable energy sources, aimed at better implementation of the main assumptions of contemporary sustainable development (especially in the field of environmental protection).

9 October 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KPKatarzyna Piotrowska
Katarzyna Piotrowska
Izabela PiaseckaIzabela Piasecka
Izabela Piasecka
PBPatrycja Bałdowska-Witos
Patrycja Bałdowska-Witos
WKWeronika Kruszelnicka
Weronika Kruszelnicka
ATAndrzej Tomporowski
Andrzej Tomporowski
Car tire manufacturing can be the cause of numerous environmental hazards. Harmful emissions from the production process are an acute danger to human health as well as the environment. To mitigate these unwanted consequences, manufacturers employ the eco-balance analysis at the product designing and development stage, when formulating general development strategies, and increasingly when investigating the entire product lifecycle management process. Since the negative effects of products are considered in a broader range of implications, it has become necessary to extend the traditional scope of analytical interest onto the production, use, and end-of-life stages. This work investigates the manufacturing of passenger car tires executed with traditional and modern manufacturing technologies. The Life Cycle Assessment (LCA) of tires reported in this study involved three LCA methods: Eco-Indicator 99, Cumulative Energy Demand (CED) and the scientific assessment methods developed by the Intergovernmental Panel on Climate Change, Global Warming Potential (IPCC). LCA as a tool for environmental analysis can be carried out for the entire life cycle or its individual phases. The implementation of the work made it possible to demonstrate that as a result of the identification of the main sources of negative impacts, it is possible to propose ways to minimize these impacts in the car tire manufacturing process. The results indicate that the most damaging impact is the depletion of natural resources, which play a key role in the production process of car tires.

1 May 2018 in Polish Maritime Research
Verified
Journal Article
Open access
PDF file
ATAndrzej Tomporowski
Andrzej Tomporowski
Izabela PiaseckaIzabela Piasecka
Izabela Piasecka
JFJózef Flizikowski
Józef Flizikowski
RKRobert Kasner
Robert Kasner
WKWeronika Kruszelnicka
Weronika Kruszelnicka
KBKazimierz Bieliński
Kazimierz Bieliński
In recent years, the offshore wind power industry has been growing dynamically. A key element which decides upon power output of a wind power plant is blades. They are most frequently produced from polymers – laminates with epoxy resins and fiberglass. In the near future, when the blade life cycles are over, large amounts of waste material of this type will have to be reused. This paper presents a comparison analysis of the impact of particular material existence cycle stages of land-based and offshore wind power plant blades on the environment. Two wind power plant blades, of about 49 m in length each, were examined using the LCA method, the programme SimaPro, and Ekowskaźnik 99 modelling (phase LCIA).

13 August 2021 in Materials
Verified
Journal Article
Open access
PDF file
PBPatrycja Bałdowska-Witos
Patrycja Bałdowska-Witos
Izabela PiaseckaIzabela Piasecka
Izabela Piasecka
Józef FlizikowskiJózef Flizikowski
Józef Flizikowski
ATAndrzej Tomporowski
Andrzej Tomporowski
AIAdam Idzikowski
Adam Idzikowski
MZMarcin Zawada
Marcin Zawada
The article characterizes selected issues related to the method of performing environmental impact analyses. Particular attention was paid to the need for identifying environmental effects associated with the process of shaping beverage bottles. This study concerns the analysis of selected stages of the machine’s life cycle environmental impact in the specific case of the blow molding machine used in the production of bottles. Life cycle assessment analysis was performed using the SimaPro 8.4.0 software (The Dutch Company Pre Consultants). The CML 2 and ReCiPe2016 methods were chosen to interpret the lists of chemical emissions. Impact categories specific to the CML 2 model are: abiotic depletion, acidification, eutrophication, global warming, ozone layer depletion, human toxicity, fresh water aquatic ecotoxicity, marine aquatic ecotoxicity, terrestrial ecotoxicity, and photochemical oxidation. Among all the considered impact categories, marine aquatic ecotoxicity was characterized by the highest level of potential harmful effects occurring during the bottle production process. A new aspect of the research is to provide updated and more detailed geographic data on Polish bottle production.