Qinghua Mao

Dr. Qinghua Mao

Xi 'an University of Science and Technology, China, Kagoshima, Japan

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 December 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZLZhinong Li
Zhinong Li
ZLZedong Li
Zedong Li
YLYunlong Li
Yunlong Li
JTJunyong Tao
Junyong Tao
QMQinghua Mao
Qinghua Mao
Xu-Hui ZhangXu-Hui Zhang
Xu-Hui Zhang
In engineering, the fault data unevenly distribute and difficultly share, which causes that the existing fault diagnosis methods cannot recognize the newly added fault types. An intelligent diagnosis method for machine fault is proposed based on federated learning. Firstly, the local fault diagnosis models diagnosing the existing fault data and the newly added fault data are established by deep convolutional neural network. Then, the weight parameters of local models are fused into global model parameters by federated learning. Finally, the global model parameters are transmitted to each local model. Therefore, each local model update into a global shared model which can recognize the newly added fault types. The proposed method is verified by bearing data. Compared with the traditional model, which can only diagnose the existing fault data but cannot recognize newly added fault types, the federated fault diagnosis model fusing weight parameters can diagnose newly added faults without exchanging the data, and the accuracy is 100%. The proposed method provides an effective method to solve the poor sharing of fault data and poor generalization of fault diagnosis model for mechanical equipment.

14 December 2022 in Energies
Verified
Journal Article
Open access
PDF file
QMQinghua Mao
Qinghua Mao
LKLi Shi Kun
Li Shi Kun
XHXin Hu
Xin Hu
XXXusheng Xue
Xusheng Xue
The belt conveyor is the main equipment for underground coal transportation. Its coal flow is mixed with large coal, gangue, anchor rods, wooden strips, and other foreign objects, which easily causes failure of the conveyor belt, such as scratching, tearing, and even broken belts. Aiming at the problem that it was difficult to accurately identify the foreign objects of underground belt conveyors due to the influence of fog, high-speed operation, and obscuration, the coal mine belt conveyor foreign object recognition method of improved YOLOv5 algorithm with defogging and deblurring was proposed. In order to improve the clarity of the monitoring video of the belt conveyor, the dark channel priori defogging algorithm is applied to reduce the impact of fog on the clarity of the monitoring video, and the image is sharpened by user-defined convolution method to reduce the blurring effect on the image in high-speed operation condition. In order to improve the precision of foreign object identification, the convolution block attention module is used to improve the feature expression ability of the foreign object in the complex background. Through adaptive spatial feature fusion, the multi-layer feature information of the foreign object image is more fully fused so as to achieve the goal of accurate recognition of foreign objects. In order to verify the recognition effect of the improved YOLOv5 algorithm, a comparative test is conducted with self-built data set and a public data set. The results show that the performance of the improved YOLOv5 algorithm is better than SSD, YOLOv3, and YOLOv5. The belt conveyor monitoring video of resolution for 1920 × 1080 in Huangling Coal Mine is used for identification verification, the recognition accuracy can reach 95.09%, and the recognition frame rate is 56.50 FPS. The improved YOLOv5 algorithm can provide a reference for the accurate recognition of targets in a complex underground environment.

18 July 2022 in Machines
Verified
Journal Article
Open access
PDF file
SJShoubo Jiang
Shoubo Jiang
SHShuan Huang
Shuan Huang
QMQinghua Mao
Qinghua Mao
QZQingliang Zeng
Qingliang Zeng
KGKui-Dong Gao
Kui-Dong Gao
JLJinwang Lv
Jinwang Lv
A scraper conveyor is important in coal mining. During operation, its working performance is affected by chain speed fluctuations, terrain fluctuations, and load changes. Thus, evaluating the influence of these factors on the dynamic properties of a scraper conveyor is important. This study first built a dynamic property test bench. Then, the vibration signals of the reducer output shaft were measured under various chain speed, terrain, and load conditions. Finally, the dynamic properties of a scraper conveyor were evaluated by conducting a frequency domain analysis of the measured vibration signals. The results show that the output shaft of the motor, the second shaft, and the second-stage meshing gear of the reducer are sensitive to external factors. Under the terrain conditions of “horizontal + vertical” bending, the middle chute was the most sensitive to the meshing frequency of the sprocket chain. This type of condition had a significant influence on the scraping phenomenon of the scraper and the middle chute. Under various load conditions, the amplitude of each shaft of the reducer decreased, especially the amplitude of the motor output shaft, but the scraping amplitude of the scraper and middle chute greatly increased. This study is of great significance for improving the dynamic properties and structural optimization of scraper conveyors.

12 February 2022 in Machine Vision and Applications
Verified
Journal Article
Closed access
PDF file
QMQinghua Mao
Qinghua Mao
YWYufei Wang
Yufei Wang
Xu-Hui ZhangXu-Hui Zhang
Xu-Hui Zhang
XZXiaoyong Zhao
Xiaoyong Zhao
GZGuang-Ming Zhang
Guang-Ming Zhang
KMKundayi Mushayi
Kundayi Mushayi

30 October 2022 in Energies
Verified
Journal Article
Open access
PDF file
RYRui Yu
Rui Yu
XFXinqiu Fang
Xinqiu Fang
CHChengjun Hu
Chengjun Hu
XYXiuyu Yang
Xiuyu Yang
Xu-Hui ZhangXu-Hui Zhang
Xu-Hui Zhang
JWJicheng Wan
Jicheng Wan
In view of the insufficient characteristics and depth acquisition difficulties encountered in the process of uniocular vision measurement, the posture measurement scheme of tunneling equipment based on uniocular vision was proposed in this study. The positioning process of coal mine tunneling equipment based on monocular vision was proposed to extract the environmental features and match the features, and the RANSAC algorithm was used to eliminate the pair of mismatching points. This was done to solve the optimized matching pair and realize the pose estimation of the camera. The pose solution model based on the triangulation depth calculation method was proposed, and the PNP solution method was adopted based on the three-dimensional spatial point coordinates so as to improve the visual measurement accuracy and stability and lay the foundation for the 3D reconstruction of the roadway. This was done to simulate the downhole environment to build an experimental verification platform for monocular visual positioning. The experimental results showed that the position measurement accuracy of the uniocular visual roadheader positioning method within 60 mm and 1.3° could realize the accurate registration of the point cloud in the global coordinate system. The time required for the whole monocular visual positioning was only 179 ms, so it had good real-time performance.

14 August 2024 in Sensors
Verified
Journal Article
Open access
PDF file
HFHongwei Fan
Hongwei Fan
JLJinpeng Liu
Jinpeng Liu
XYXinshan Yan
Xinshan Yan
CZChao Zhang
Chao Zhang
CGCao Xian gang
Cao Xian gang
QMQinghua Mao
Qinghua Mao
Foreign objects in coal flow easily cause damage to conveyor belts, and most foreign objects are often occluded, making them difficult to detect. Aiming at solving the problems of low accuracy and efficiency in the detection of occluded targets in a low-illumination and dust fog environment, an image detection method for foreign objects is proposed. Firstly, YOLOv5s back-end processing is optimized by soft non-maximum suppression to reduce the influence of dense objects. Secondly, SimOTA label allocation is used to reduce the influence of ambiguous samples under dense occlusion. Then, Slide Loss is used to excavate difficult samples, and Inner–SIoU is used to optimize the bounding box regression loss. Finally, Group–Taylor pruning is used to compress the model. The experimental results show that the proposed method has only 4.20 × 105 parameters, a computational amount of 1.00 × 109, a model size of 1.20 MB, and an mAP0.5 of up to 91.30% on the self-built dataset. The detection speed on the different computing devices is as high as 66.31, 41.90, and 33.03 FPS. This proves that the proposed method achieves fast and high-accuracy detection of multi-layer occluded coal flow foreign objects.