Electric vehicle sales are growing globally in response to the move towards a greener environment and a reduction in greenhouse gas emissions. As in any machine, grease lubricants will play a significant role in the component life of these new power plants and drivetrains. In this paper, the role of grease lubrication in electric vehicles (EVs) and hybrid vehicles (HVs) will be discussed in terms of performance requirements. Comparisons of grease lubrication in EVs and HVs for performance requirements to current internal combustion engines (ICEs) will be reviewed to contrast the major differences under different operating conditions. The operating conditions for grease lubrication in these EVs and HVs are demanding. Greases formulated and manufactured to meet specific performance specifications in EVs and HVs, which will operate within these specific electrification components, will be reviewed. Specifically, the thermal and electrified effects from the higher operating temperatures and electromagnetic fields on lubricant degradation, rheology, elastomer compatibility, and corrosion protection of the grease need to be evaluated to accurately meet the performance requirements for EVs and HV. The major differences between EVs and conventional ICEVs can be grouped into the following technical areas: energy efficiency, noise, vibration, and harshness (NVH), the presence of electrical current and electromagnetic fields from electric modules, sensors and circuits, and bearing lubrication. Additional considerations include thermal heat transfer, seals, corrosion protection, and materials’ compatibility. The authors will review the future development trends of EVs/HVs on driveline lubrication and thermal management requirements. The future development of electric vehicles will globally influence the selection and development of gear oils, coolants, and greases as they will be in contact with electric modules, sensors, and circuits and will be affected by electrical current and electromagnetic fields. The increasing presence of electrical parts in EVs/HVs will demand the corrosion protection of bearings and other remaining mechanical components. Thus, it is imperative that specialized greases should be explored for specific applications in EVs/HVs to ensure maximum protection from friction, wear, and corrosion to guarantee the longevity of the operating automobile. Low-viscosity lubricants and greases will be used in EVs to achieve improvements in energy efficiency. However, low-viscosity fluids reduce the film thickness in the driveline application. This reduced film thickness increases the operating temperature and reduces the calculated fatigue life of the bearings. Bearing components for EVs/HVs will be even more crucial as original equipment manufacturers (OEMs) specify these low-viscosity fluids. The application of premium bearing components using low-viscosity grease will leverage materials, bearing geometries, and surface topography to combat the impact of low-viscosity lubricants. In addition, EVs and HVs will create their own NVH challenges. Wind and road noise are more prominent, with no masking noise from the ICE. Increasing comfort, quality, and reliability issues will be more complicated with the introduction of new electrified powertrain and E-driveline subsystems. This paper elaborates on the current development trends and industrial test standard for the specified grease used for electrical/hybrid driveline lubrication.

Primary energy has become a vital part of society—from mobility, heating, and cooling to refrigeration to preserve food as well as for simple communication methods, such as texting. As such, pollution and environmental concerns regarding the impact of human activities have become mainstream and efforts have been made to reduce solid wastes as well as CO₂ and greenhouse gas emissions. Renewable energy is almost synonymous with environmentally friendly. While energy conversion from fossil fuels and natural gases is responsible for most of the pollution (CO₂, NO_x, SO₂, particulate matter (PM), etc.) in modern society, these processes also generated 86% of global primary energy in 2019. Furthermore, as humans become more dependent on energy, power demands will only increase with time. Material hunger represents another little perceived dependency of human prosperity. The longevity of products and goods is crucial to limit CO_2eq emissions associated with material streams. This paper will focus on two relationships: that of CO₂ and friction, and that of sustainability and wear protection.

High temperature tribology is considered to begin from a minimum temperature of 300–350 °C, where organic base oils and polymers begin to decompose, until a temperature of 1000 °C. In this field of tribology, tests are typically run under dry or solid-state friction, unless a solid lubricant is used, since most lubricants will oxidize or break down when exposed to these extreme temperatures. Therefore, this form of tribotesting is useful to determine the friction, wear, and other tribological characteristics of coatings, ceramics, alloys, cermets, and similar materials. Additionally, high temperature tribology is important to further understand the frictional interactions and adhesive behavior of contacts that operate at these high temperatures. When considering measurements of the tribological parameters in a high temperature application, the standard Schwingung, Reibung, Verschleiž (SRV) (Oscillating, friction, wear, in English) reciprocating, linear-oscillatory tribometer can be modified for testing temperatures of up to 1000 °C by using a high temperature heating block. With this configuration, the instrument can accurately monitor many parameters of the tribosystem, such as coefficient of friction, electrical resistance, zero stroke point, sliding speed, and others. As a result, the SRV instrument is shown to be a powerful tool for high temperature tribotesting. This paper will provide an overview of this high temperature tribology test rig and will discuss its versatility and efficacy, and will show how it can effectively be implemented in both research and practical applications for the development of various coatings and other high temperature tribological contacts.