Rachid Makhloufi

Dr. Rachid Makhloufi

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 March 2026 in RSC Advances
Verified
Journal Article
Open access
PDF file
MJMuhammad Awais Jehangir
Muhammad Awais Jehangir
SRSelma Rabhi
Selma Rabhi
Rachid MakhloufiRachid Makhloufi
Rachid Makhloufi
ASAsadul Islam Shimul
Asadul Islam Shimul
AKAsif Nawaz Khan
Asif Nawaz Khan
Mir Waqas AlamMir Waqas Alam
Mir Waqas Alam
Halide perovskites have garnered significant interest as advanced materials for optoelectronic applications and energy harvesting devices, owing to their adjustable bandgaps, elevated absorption coefficients, and exceptional charge transport characteristics. Among them, double perovskites of the less explored formula, specifically A3BX6-type halide double perovskites, remain relatively underrepresented in the literature. In this work, the structural, mechanical, thermodynamic, electronic, optical, and thermoelectrical properties of the lead-free halide perovskites A3GaI6 (A = Cs, K, Rb) were systematically investigated using first-principles calculations within the WIEN2k framework employing GGA-PBE, TB-mBJ, and TB-mBJ+SOC functionals. Structural stability was confirmed through Goldschmidt tolerance factors, negative formation energies, convex-hull analysis, and elastic constants. The calculated direct band gaps based on both functionals (TB-mBJ/TB-mBJ+SOC) of 2.06/1.88 eV (Cs3GaI6), 1.83/1.65 eV (K3GaI6), and 1.94/1.76 eV (Rb3GaI6) indicate strong optical absorption in the visible to near-infrared region. Carrier-density and Bader-charge analyses reveal that the Ga–I framework governs electronic transport, while the A-site cations tune the charge distribution, with K3GaI6 and Rb3GaI6 exhibiting higher carrier densities and stronger charge transfer than Cs3GaI6. Among the studied compounds, K3GaI6 possesses the most suitable band gap (∼1.65 eV), lower carrier effective masses, higher carrier mobilities, and a larger static dielectric constant, indicating efficient charge separation and transport, and thus superior photovoltaic potential. Based on DFT-derived parameters, SCAPS-1D simulations of sixteen n-i-p device architectures based on K3GaI6 yield power conversion efficiencies ranging from 19.48% to 22.48%, with the AZO/STO/K3GaI6/Zn2P2 configuration showing the best performance due to favorable band alignment and transport-layer properties. After optimization, the efficiency reaches 27.19%, highlighting K3GaI6 as a highly promising lead-free absorber for high-performance perovskite solar cells. This work establishes a direct link between material properties and device performance and provides a solid theoretical foundation for the experimental realization of A3GaI6-based optoelectronic and energy-harvesting applications.

8 April 2022 in Chemical Data Collections
Verified
Journal Article
Closed access
Rachid MakhloufiRachid Makhloufi
Rachid Makhloufi
SHSalah Eddine Hachani
Salah Eddine Hachani
AFAsma Fettah
Asma Fettah
WTWalid Tair
Walid Tair
ZZZina Zekri
Zina Zekri

4 November 2024 in Physica Scripta
Verified
Journal Article
Closed access
RCRania CHARIF
Rania CHARIF
Rachid MakhloufiRachid Makhloufi
Rachid Makhloufi
SMSarah Chaba mouna Chaba mouna
Sarah Chaba mouna Chaba mouna
ACAbdelhakim Chadli
Abdelhakim Chadli
ABAyoub Barkat
Ayoub Barkat
MNMourad Nouiri
Mourad Nouiri
This work does an extensive analysis of the optoelectronic and mechanical properties of the tri rutile structure type 3d transition metal Antimonate MSb2O6 (M = Fe, Co, Ni, or Zn), for the first time, utilizing the pseudo-potential plane wave approach within the density functional theory framework. When calculating the structural, optical, and mechanical properties, the exchange–correlation interactions were studied using the GGA-PBE functional, whereas when computing electronic, it is analyzed using the HSE06 hybrid functional. The equilibrium lattice parameters exhibit good agreement with the available experimental results. The electronic properties were estimated using the GGA-PBE and HSE06 functionals. Based on the calculated electronic properties with the GGA-PBE functional, the FeSb2O6, CoSb2O6, and NiSb2O6 materials exhibit metallic behavior with energy gap values of 0 eV, while ZnSb2O6 is a semiconductor with a narrow direct band gap (Γ–Γ) of 0.5 eV. Furthermore, the computed band gaps using the HSE06 functional are 0 eV, 0 eV, 1 eV (Γ–Γ), and 4 eV (Γ–Γ) for FeSb2O6, CoSb2O6, NiSb2O6, and ZnSb2O6, respectively. Density of states diagrams were used to gain deeper insights into the characteristics of the energy bands. The optical properties of these compounds, such as the dielectric function, energy loss function, conductivity, reflectivity, refractive index, and absorption coefficient were investigated over the energy range of 0 to 40 eV. The materials exhibited a high absorption coefficient and a significantly low reflectivity within the UV–vis energy spectrum. The negative cohesive energy Ecoh implies the chemical (thermodynamic) stability of the trirutile MSb2O6 (M = Fe, Co, Ni, or Zn). Mechanical stability is confirmed by applying the Born stability criteria using elastic constants (Cij). The absence of imaginary frequencies in the phonon spectrum calculations confirms the dynamic stability of the studied compounds. These results are consistent with previous experimental research on these materials in photocatalysis and gas sensor applications. On the other hand, these compounds possess exceptional high and broad optical absorption UV range, making them suitable for use in next-generation ultraviolet photodetectors.

5 February 2021 in Polish Journal of Environmental Studies
Verified
Journal Article
Open access
RRRania Remmani
Rania Remmani
Rachid MakhloufiRachid Makhloufi
Rachid Makhloufi
MMMalek Miladi
Malek Miladi
AOAbdelkader Ouakouak
Abdelkader Ouakouak
ACAntonio Ruiz Canales
Antonio Ruiz Canales
DNDámaris Núñez-Gómez
Dámaris Núñez-Gómez
The current study seeks to investigate the feasibility use of date palm kernels for the development of activated carbon (AC) towards its application, which functions as an adsorbent to treat oil-contaminated groundwater. Biochar derived from date palm kernels (BPK), was prepared by direct pyrolysis of the raw precursor at 600ºC for 90 minutes (in oxygen-limited condition). Activated carbon (ACPK) included similar pyrolysis conditions of biochar with subsequent impregnation in H2SO4 (as activating agent) at a ratio of acid: biochar (1:1), moderate temperature. The analytical approach was performed through the use of XRD, BET, and FTIR, techniques to evaluate the effect of carbonization and activation process in improving the adsorptive properties of starting materials. Carbonaceous adsorbents obtained were highly porous due to their elevated specific surface area of (333.4 m²/g for BPK and 741.5 m²/g for ACPK) and their amorphous structure. Indeed, the textural proprieties were significantly improved by the acidic treatment. Further, the adsorption behavior of produced materials was tested by performing batch adsorption tests in contaminated water samples using a ratio of 1:1 (g/L) for 24 hours. The efficiency of adsorbents was evaluated by COD (C0 = 8568 mg/L), BOD5 (C0 = 200 mg/L) concentration, pH and hardness values before and after the treatment. Removal efficiency of COD for the BPK and ACPK samples reached 82.6% and 95.2% respectively, while for BOD5 was the same (97.0%) for both adsorbents. Additionally, the treated water sample has the same excellent class suitable for irrigation applications according to the Wilcox diagram. In consequence, the present study suggests an effective, eco-friendly and economical adsorption process intending to mitigate environmental risk sustainably.

30 April 2022 in Annales de Chimie - Science des Matériaux
Verified
Journal Article
Closed access
Rachid MakhloufiRachid Makhloufi
Rachid Makhloufi
SHSalah Eddine Hachani
Salah Eddine Hachani
AFAsma Fettah
Asma Fettah
BMBahia Messai
Bahia Messai
The present scientific contribution aims to elaborate antimony oxychloride Sb4O5Cl2 via a wet chemistry method and to study its photocatalytic activity to degrade methylene blue and crystal violet cationic dyes. The prepared samples were characterized using powder X-ray diffraction PXRD, Fourier transform infrared spectroscopy FTIR, Scanning electron microscopy analysis SEM and UV-Visible measurements. PXRD results revealed that the Sb4O5Cl2 was successfully formed in a monoclinic phase structure with P21/a space group. FTIR results show the presence of all characteristic bands that distinguished the prepared compound mainly include Sb−O, Sb−O−Sb, and Sb=O vibrating modes bands located at 503, 607, and 832 cm-1, respectively. SEM micrograph showed that the microstructure of the prepared antimony oxychloride is composed of particles with sand rose morphology. UV-Visible outcomes demonstrated that our synthesized Sb4O5Cl2 is an efficient photocatalyst for the degradation of both methylene blue MB and crystal violet CV targeted dyes. MB degradation reached 93.67% after 30 min while CV degradation up to 92.56% after 360 min.

16 November 2020 in Journal of Electronic Materials
Verified
Journal Article
Closed access
PDF file
ACA. Chadli
A. Chadli
BLB. Lagoun
B. Lagoun
LAlinda linda aissani
linda linda aissani
SKS. Khenchoul
S. Khenchoul
ICI. Chadli
I. Chadli
El Kebir HLILEl Kebir HLIL
El Kebir HLIL