Rafael Carrera Espinoza

Dr. Rafael Carrera Espinoza

Department of Industrial and Mechanical Engineering, Universidad de las Américas Puebla, San Andrés Cholula, Mexico
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2021 in Coatings
Verified
Journal Article
Open access
PDF file
PRPablo A. Ruiz-Trabolsi
Pablo A. Ruiz-Trabolsi
JVJulio C. Velázquez-Altamirano
Julio C. Velázquez-Altamirano
COCarlos Orozco-Álvarez
Carlos Orozco-Álvarez
Rafael Carrera EspinozaRafael Carrera Espinoza
Rafael Carrera Espinoza
JYJorge A. Yescas-Hernández
Jorge A. Yescas-Hernández
EHEnrique Hernández-Sánchez
Enrique Hernández-Sánchez
Boride layers are typically used to combat the wear and corrosion of metals. For this reason, to improve our knowledge of the boriding process, this research studied the effect of the size of the treated material on the kinetics of the growth of the boride layers obtained during a solid diffusion process. The purpose was to elucidate how the layers’ growth kinetics could be affected by the size of the samples since, as the amount of matter increases, the amount of energy necessary to make the process occur also increases. Furthermore, the level of activation energy seems to change as a function of the sample size, although it is considered an intrinsic parameter of each material. Six cylindrical samples with different diameters were exposed to the boriding process for three different exposure times (1.5, 3, and 5 h). The treatment temperatures used were 900, 950, and 1000 °C for each size and duration of treatment. The results show that the layer thickness increased not only as a function of the treatment conditions but also as a function of the sample diameter. The influence of the sample size on the growth kinetics of the boride layers is clear, because the growth rate increased even though the treatment conditions (time and temperature) remained constant.

11 January 2024 in Designs
Verified
Journal Article
Open access
PDF file
MJMoises Jimenez-Martinez
Moises Jimenez-Martinez
JVJulio Varela-Soriano
Julio Varela-Soriano
Rafael Carrera EspinozaRafael Carrera Espinoza
Rafael Carrera Espinoza
STSergio Torres
Sergio Torres
JPJacinto Cortéz Pérez
Jacinto Cortéz Pérez
To reduce the carbon footprint of manufacturing processes, it is necessary to reduce the number of stages in the development process. To this end, integrating additive manufacturing processes with three-dimensional (3D) printing makes it possible to eliminate the need to use tooling for component manufacturing. Furthermore, using 3D printing allows the generation of complex models to optimize different components, reducing the development time and realizing lightweight structures that can be applied in different industries, such as the mobility industry. Printing process parameters have been studied to improve the mechanical properties of printed items. In this regard, although the failure of most structural components occurs under dynamic load, the majority of the evaluations are quasistatic. This work highlights an improvement in fatigue strength under dynamic loads in 3D-printed components through heat treatment. The fatigue resistance was improved regarding the number of cycles and the dispersion of results. This allows 3D-printed polylactic acid components to be structurally used, and increasing their reliability allows their evolution from a prototype to a functional component.

20 February 2022 in Crystals
Verified
Journal Article
Open access
PDF file
PRPablo Alfredo Ruiz-Trabolsi
Pablo Alfredo Ruiz-Trabolsi
Alexis Chino-UlloaAlexis Chino-Ulloa
Alexis Chino-Ulloa
JMJosé G. MIRANDA-HERNANDEZ
José G. MIRANDA-HERNANDEZ
RTRAUL TADEO
RAUL TADEO
Rafael Carrera EspinozaRafael Carrera Espinoza
Rafael Carrera Espinoza
EHEnrique Hernández-Sánchez
Enrique Hernández-Sánchez
This work compares the tribological behavior of surface layers obtained by three different hardening processes. The layers were formed on the surface of AISI 4140 steel by applying three different thermochemical treatments. Wear resistance was evaluated using a standardized tribological machine for abrasive wear, according to the limits established by the ASTM G65 “Standard Test Method for Measuring Abrasion Using Dry Sand/Rubber Wheel Apparatus”. According to the results, the boride layers exhibited the highest wear resistance, as compared to nitrided and carburized layers. In contrast, the carburized layers presented the highest loss of volume. Scanning electron microscopy (SEM) was used to analyze the worn surfaces to examine the wear mechanisms. Abrasive wear was identified in all the samples, as the main abrasive wear mechanism. The mean values of the coefficient of friction (CoF) of the hardened surfaces were 0.39, 0.55, and 0.65 for carburizing, nitriding, and boriding samples, respectively, indicating that the wear process may not always be related to a low CoF. The results suggest that the highest hardness is normally associated with high wear resistance, but the coefficient of friction could be not directly related to the hardness of the materials. Finally, a statistical study demonstrates the random nature of the layers obtained by three different hardening processes.

14 November 2019 in Coatings
Verified
Journal Article
Open access
PDF file
JVJulio C. Velázquez-Altamirano
Julio C. Velázquez-Altamirano
IAItzel Pamela Torres Avila
Itzel Pamela Torres Avila
GTGerardo Terán_Mendez
Gerardo Terán_Mendez
SCSelene Capula
Selene Capula
RCROMAN CABRERA-SIERRA
ROMAN CABRERA-SIERRA
EHEnrique Hernández-Sánchez
Enrique Hernández-Sánchez
The stochastic nature of the thickness of boride layers formed on carbon steel is described in this paper. Additionally, the probability distribution of the layer thickness is studied to determine the best-fit probability distribution. The study combines the use of an empirical model (power-law) and the Markov chain principles, with the purpose of demonstrating that it is feasible to develop a model that represents the non-uniformity of the thickness of boride layers that form on carbon steel. The results indicate that the mean and variance tend to increase when the time or temperature is increased. The findings of this paper demonstrate that an analytical solution to the Kolmogorov’s system differential equation can adequately represent the behavior of non-uniform boride layer formed on low-carbon steel, regardless of the temperature or duration of treatment.

5 July 2023 in Crystals
Verified
Journal Article
Open access
PDF file
IAItzel Pamela Torres Avila
Itzel Pamela Torres Avila
RSRoberto Souza
Roberto Souza
Alexis Chino-UlloaAlexis Chino-Ulloa
Alexis Chino-Ulloa
PRPablo Alfredo Ruiz-Trabolsi
Pablo Alfredo Ruiz-Trabolsi
RTRAUL TADEO
RAUL TADEO
EHEnrique Hernández-Sánchez
Enrique Hernández-Sánchez
In this work, titanium oxide nanotubes (TNTs) were formed by anodic oxidation on the surface of a Ti–6Al–4V alloy. An electrolyte based on ethylene glycol (EG) and ammonium fluoride (NH4F) was used. Different anodizing periods (10, 20, 30, 40, 50, and 60 min) with a constant potential of 60 V were established. The morphology of the TNT array was observed by scanning electron microscopy (SEM). The adhesion strength of the TNTs to the Ti–6Al–4V surface was evaluated using nanoscratch tests. The critical load of the different TNT layers was determined from the analysis of the groove of the nanoindenter path. It ranged from 0 mN for the samples exposed to 10 min of anodization to 47.0 ± 3.0 mN for samples exposed to 50 min. These results indicate the TNT layers formed at 50 min presented the best substrate adhesion among the specimen tested.

21 June 2024 in Materials
Verified
Journal Article
Open access
PDF file
Rafael Carrera EspinozaRafael Carrera Espinoza
Rafael Carrera Espinoza
Melvyn Alvarez VeraMelvyn Alvarez Vera
Melvyn Alvarez Vera
MWMarc Wettlaufer
Marc Wettlaufer
MKManuel Kerl
Manuel Kerl
SBStefan Barth
Stefan Barth
JOJavier Ortega
Javier Ortega
DIN 16MnCr5 is commonly used in mechanical engineering contact applications such as gears, joint parts, shafts, gear wheels, camshafts, bolts, pins, and cardan joints, among others. This study examined the microstructural and mechanical properties and tribological behavior of different surface treatments applied to DIN 16MnCr5 steel. The samples were hardened at 870 °C for 15 min and then quenched in water. The surface conditions evaluated were as follows: quenched and tempered DIN 16MnCr5 steel samples without surface treatments (control group), quenched and tempered DIN 16MnCr5 steel samples with gas-nitriding at 560 °C for 6 h, quenched and tempered DIN 16MnCr5 steel samples with pack boriding at 950 °C for 4 h, and quenched and tempered DIN 16MnCr5 steel samples with duplex gas-nitriding and pack boriding. Microstructure characterization was carried out using metallographic techniques, optical microscopy, scanning electron microscopy with energy-dispersive spectroscopy, and X-ray diffraction. The mechanical properties were assessed through microhardness and elastic modulus tests using nanoindentation. The tribological behavior was evaluated using pin-on-disc tests following the ASTM G99-17 standard procedure under dry sliding conditions. The results indicated that the surface treated with duplex gas-nitriding and pack boriding exhibited the highest wear resistance and a reduced coefficient of friction due to improved mechanical properties, leading to increased hardness and elastic modulus.