In this study, we assessed the effects of different harvest times (9 a.m., 1 p.m., and 5 p.m.) and hydrodistillation times (60, 90, and 120 min) on the yield, chemical composition, and antioxidant activity of the spearmint (Mentha spicata L.) essential oil (EO) sourced from the Amazon region. EO yield was ≥1.55% and was not significantly influenced (p ≥ 0.05) by the different harvest times and hydrodistillation times. Thirty-one different organic compounds were identified, of which menthol (91.56–95.68%), menthone (0.6–2.72%), and isomenthone (0.55–1.46%) were the major constituents. The highest menthol content in the EO was obtained from samples collected at 9 a.m., with a hydrodistillation time of 60–90 min, compared to other harvest and hydrodistillation times. This suggests that exposure to sun and light, which is greater at harvest times of 1 p.m. and 5 p.m., decreased the menthol content and altered the chemical composition of Mentha EO. Furthermore, the sample harvested at 9 a.m. and hydrodistilled for 60 min showed the highest antioxidant activity (61.67 equivalent mg of Trolox per g of EO), indicating that antioxidant activity is strongly affected by light exposure and the contact duration of the sample with boiling water during hydrodistillation.
7 May 2020 in International Journal of Environmental Science and Technology
This study evaluated Bacaba powder produced in a spouted bed as a source of bioactive compounds and high energy value. The conditions influencing the drying process parameters (yield, moisture level, phenolic and anthocyanin retention) as well as simultaneous optimization (optimal conditions) of production were also considered. Drying was most efficient at 75 °C using maltodextrin concentrations above 20.0% (w/w). Higher anthocyanin retention (92.52%) at 65 °C (p = 0.0003), and a maltodextrin concentration of 20.0% (w/w) resulted in high retention of phenolics (95.38%). Accordingly, the operations tested under the desirability function (68 °C, maltodextrin concentration of 21.7% w/w, and air velocity of 1.3 × minimum spouting velocity (Vjm) m s-1) resulted in a process yield of 55.04% and the dry basis (d.b.) composition results were: total phenolics (376.43 mg GAE 100 g-1), energetic value (612.64 kcal 100 g-1), lipids (47.74 g 100 g-1), carbohydrates (27.79 g 100 g-1), protein (15.10 g 100 g-1), and dietetic fiber (8.45 g 100 g-1). The high solubility (92%), flowability (14%), energy, and bioactive characteristics of Bacaba powder suggest the potential for many applications, such as development of dietary supplements, high-energy drinks, milk-based and instant products, and bakery products.
Banana pseudo-stem fiber drying was studied in a vertical fixed-bed convective dryer (60, 75, and 90°C). Nine mathematical models were used to analyze the drying behavior and the effective moisture diffusivity, activation energy, and thermodynamic properties were calculated. The dry fibers were evaluated by thermogravimetric, spectroscopic, and morphological analyses. High drying initial rates (25–30%) were observed indicating rapid evaporation of the free moisture present in the fibers. At the end of the process the moisture content decreased to 2.82, 0.14, and 0.16% (dry basis, db). The diffusion approximation model best fitted the experimental data and the effective diffusion coefficient increased with increasing temperature, reaching the order 10−7 m2 s−1. The activation energy required to initiate moisture removal from the fibers equaled 47.61 kJ mol−1, and contrary to the entropy and Gibbs free energy, the enthalpy decreased with increasing temperature, indicating that drying is an endergonic non-spontaneous process. Lignocellulosic absorption bands were identified and material degradation occurred at temperatures >190°C, according to thermogravimetric analysis. Morphological changes in the dry fibers mainly occurred at 90°C and led to structural damage. These changes were attributed to the tensile strength generated from the temperature and moisture gradients produced during drying.