We report on the generation of dissipative solitons in an Er-doped fiber laser mode-locked by antimony telluride () topological insulator in the near-zero dispersion regime. Layers of were deposited on a side-polished (D-shaped) fiber using a pulsed magnetron sputtering technique. Sub-170-fs pulses with 34-nm full width at half-maximum (FWHM) and 0.21 nJ of pulse energy were obtained from an all-fiber, ring-shaped laser cavity after the compression in a single-mode fiber.
We report a study on a hybrid mode-locked fiber laser with two saturable absorbers: slow and fast, integrated in a single device. Amorphous antimony telluride (Sb2Te3) layer was deposited on side-polished fiber to form the slow saturable absorber due to the third order nonlinear susceptibility of Sb2Te3. Additionally, an unsymmetrical design of the device causes polarization-dependent losses and together with polarization controller allows to use a nonlinear polarization evolution to form the artificial fast saturable absorber. Sub-200 fs soliton pulses with 0.27 nJ of pulse energy were generated in the hybrid mode-locked Er-doped fiber laser. Differences in the dynamics of mode-locked laser are further investigated with the use of slow and fast saturable absorbers solely, and compared with the hybrid device. Joint operation of two saturable absorbers enhances the laser performance and stability. The conducted experiments allowed to define roles of each mechanism on the pulse shaping in the laser cavity.
1 November 2008 in Journal of Physics and Chemistry of Solids
We present a study on a antimony telluride (Sb2Te3)-deposited side-polished fiber device as a saturable absorber for Yb-doped mode-locked fiber lasers. Thin layers of Sb2Te3 with variable length were deposited by a pulsed magnetron sputtering technique. We demonstrate measured characteristics of the device and show that it can be treated as a hybrid component - tunable polarizer with saturable absorption properties. The polarizing extinction ratio varies from 1.5 dB up to 17.1 dB with increasing length of the deposition. The fiber components were employed in all-normal Yb-doped fiber cavities. All devices enabled for mode-locked operation by means of hybrid mode-locking or nonlinear polarization evolution mechanism. In particular, the laser with 2 mm long Sb2Te3 absorber emitted 5.9 ps pulses with 4 mW of average output power.
Ultra-high-pulse-repetition-rate lasers are essential for a number of applications, including, e.g., optical communication and ablation-cooled material processing. Despite several techniques to generate pulses with gigahertz-range repetition rate, incorporating mainly short-length resonators, more widespread applications are still limited by the lack of a robust, simple, and cost-effective solution. Here, we report for the first time, to the best of our knowledge, fully passive harmonic mode locking in an all-polarization-maintaining (PM) fiber laser. The design guarantees a fixed polarization state and stable operation, where the cavity harmonic number is controlled by the pump power only. Self-starting operation is provided by the antimony telluride () thin-film saturable absorber (SA), which facilitates multiple pulse operation. The SA acts by means of low modulation depth, low saturation fluence, and an inverse slope in the saturable absorption curve. The optimum features of the SA and limiting factors for high-repetition-rate pulse generation in this regime of operation are discussed. As a result, 2.2 ps pulses with 3 GHz repetition rate are generated at 1560 nm wavelength. The study reports a new approach towards an optimal SA for multi-gigahertz pulse generation in practical, all-PM fiber lasers.