The growing demand and diversity in the application of industrial composites and the current inability of present non-destructive evaluation (NDE) methods to perform detailed inspection of these composites has motivated this comprehensive review of sensing technologies. NDE has the potential to be a versatile tool for maintaining composite structures deployed in hazardous and inaccessible areas, such as offshore wind farms and nuclear power plants. Therefore, the future composite solutions need to take into consideration the niche requirements of these high-value/critical applications. Composite materials are intrinsically complex due to their anisotropic and non-homogeneous characteristics. This presents a significant challenge for evaluation and the associated data analysis for NDEs. For example, the quality assurance, certification of composite structures, and early detection of the failure is complex due to the variability and tolerances involved in the composite manufacturing. Adapting existing NDE methods to detect and locate the defects at multiple length scales in the complex materials represents a significant challenge, resulting in a delayed and incorrect diagnosis of the structural health. This paper presents a comprehensive review of the NDE techniques, that includes a detailed discussion of their working principles, setup, advantages, limitations, and usage level for the structural composites. A comparison between these techniques is also presented, providing an insight into the future trends for composites’ prognostic and health management (PHM). Current research trends show the emergence of the non-contact-type NDE (including digital image correlation, infrared tomography, as well as disruptive frequency-modulated continuous wave techniques) for structural composites, and the reasons for their choice over the most popular contact-type (ultrasonic, acoustic, and piezoelectric testing) NDE methods is also discussed. The analysis of this new sensing modality for composites’ is presented within the context of the state-of-the-art and projected future requirements.
This work reports the development and testing of a magnetic polymer (Polyamide 6, PA6) nanocomposite capable of melting when exposed to an external magnetic field. Addition of high concentrations of iron oxide nanoparticles (NPs) can induce quick melting but is detrimental to the mechanical properties of the polymer. To reduce the amount of NPs required for achieving efficient melting, they should be well dispersed in the polymer. In this study, the oleic acid loading on the surfaces of the NPs was varied to study the effect of variations in coatings on the dispersion in the polymer and on the polymer melting time. The NPs functionalized with oleic acid were added to melted monomer ε-caprolactam and polymerized using ring-opening polymerization. The resulting PA6 nanocomposite was characterized by Fourier-transform infrared spectroscopy, differential scanning calorimetry, x-ray diffraction and transmission electron microscopy. The results confirmed that the PA6 nanocomposite showed a decrease of 8–10% in its glass-transition temperature compared to commercial PA6. The crystallinity of the synthesized samples were found to vary between 42% and 57%. The 55 wt.% oleic acid-loaded NPs were found to disperse most efficiently in the PA6 matrix; however, some large agglomerates were formed due to excessive oleic acid. Therefore, the 22 wt.% oleic acid coating showed overall superior dispersion. Additionally, the magnetic induction response was tested by observing a melt-characteristic of the magnetic polymer composite using a model set-up. Oleic acid concentration is found to affect the dispersion, melting time and crystallinity of the nanocomposite.
Polymer–nanoparticle composites prepared using a low-density polyethylene (LDPE) matrix with BaTiO3 nanoparticle compositions of 6, 9, 12, and 15 wt % have shown insulating behavior and are evaluated for their applicability as flexible strain sensors. With increasing percentage of the nanoparticles, the LDPE crystallinity decreased from 38.11 to 33.79% and the maximum electrical displacement response was seen to increase from 2.727 × 10–4 to 4.802 × 10–4 C/cm2. The maximum current, remnant current, and coercive field, all increased with the increasing nanoinclusion loading. Furthermore, the interaction radius values derived from the three-dimensional (3D) model of the nanoparticle dispersion state in polymer–nanoparticle composites were found to be correlated with its key properties. The interaction radius values from the simulated 3D model gave a clear basis for comparing the electrical properties of the samples with the effect of the nanoparticles’ functionalization on the dispersion state in the context of the increased NP loading and giving the values of 275, 290, 310, and 300 nm, respectively. The 12 wt % nanoparticulate-loaded sample demonstrates the best overall trade-off of key parameters studied herein. Overall, the results demonstrate that these flexible polymer–nanoparticle composites could be used for strain-based sensors in the high-tension applications.
The self-repairing composite materials integrated with sensing is way forward to reduce maintenance cost and increase consumer safety. In this work, the novel self-healing carbon fibre reinforced unidirectional bulk tape of simple architecture is prepared using nanocomposite film. The bulk material tape was prepared using nanocomposite film of low melting temperature polymer sandwiched between two carbon fibre reinforced unidirectional tapes. First, the nanocomposite polyamide 6 (PA 6) tape with iron oxide nanoparticle was prepared using in-situ polymerization and mixing method. The iron oxide nanoparticle was silane coated suing tri-phasic reverse emulsion method to achieve better dispersion in PA 6 matrix. The nanocomposite was characterized using FTIR, XRD, DSC and TEM. Result shows that the proposed method of preparing self-healing bulk tape material has potential to be used for self-healing composite structure.