The prevalence of bacterial infections in wounds is a significant challenge to successful wound healing. This study investigates the antibacterial effect of hyaluronic acid and alginate aerogel loaded with zinc oxide nanoparticles as a potential dressing for wound healing. The aerogel composite was synthesized via supercritical gel drying and characterized by scanning electron microscope, Fourier transform infrared spectroscopy, and nitrogen porosimetry. The absorptivity of the prepared aerogel was evaluated, as well as the antibacterial activity, which was evaluated against common wound pathogens, including Staphylococcus aureus and Escherichia coli, using the agar diffusion method. The results show the effective antibacterial properties of the prepared hydrogel and aerogel. Furthermore, the results show water absorption ability of 5791 and 1585% for loaded and unloaded aerogels, respectively. The ZnO released from the aerogel exhibited a rapid release followed by a slow and sustained release. These findings highlight the potential of aerogels based on hyaluronic acid and alginate and loaded with zinc oxide nanoparticles as an innovative antibacterial wound dressing material, which is expected to improve wound healing and reduce the risk of bacterial infections.
The development of advanced wound dressing materials with enhanced antibacterial properties is critical for improving patient outcomes and reducing infection risks. This study introduces a novel bio-based aerogel composed of copper-crosslinked alginate and hyaluronic acid, synthesized using supercritical gel drying techniques. Alginate and hyaluronic acid polymers are widely used in the pharmaceutical and medical industries because of their nontoxicity, biodegradability, and biocompatibility. This study aimed to create an aerogel that could be used as a potential wound dressing material by crosslinking hyaluronic acid and alginate with copper. The bio-based aerogel was prepared by ionic gelation and supercritical gel drying. The prepared materials were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), BET surface area analysis, and energy-dispersive X-ray fluorescence (XRF). Moreover, the aerogel wound dressing properties were evaluated in terms of fluid uptake and antibacterial activity against S. aureus and E. coli. The physicochemical characterization of the prepared aerogels revealed their unique structural and morphological features, which are influenced by copper ion concentration and crosslinking time. Regarding their wound dressing evaluation, both aerogel and hydrogel were found to have antibacterial properties when tested on S. aureus with inhibition zones of (36 mm, 23 mm) and E. coli (31.6 mm, 21 mm) for hydrogel and aerogel, respectively. Also, excellent fluid uptake was found to reach up to 743%. These findings underscore the potential of copper-crosslinked alginate–hyaluronic acid aerogels as innovative wound dressing materials that combine superior antibacterial efficacy with excellent fluid management, paving the way for improved wound healing solutions.
This study explores the innovative potential of native lignin as a sustainable biopolyol for synthesizing polyurethane aerogels with variable microstructures, significant specific surface areas, and high mechanical stability. Three types of lignin—Organosolv, Aquasolv, and Soda lignin—were evaluated based on structural characteristics, Klason lignin content, and particle size, with Organosolv lignin being identified as the optimal candidate. The microstructure of lignin polyurethane samples was adjustable by solvent choice: Gelation in DMSO and pyridine, with high affinity to lignin, resulted in dense materials with low specific surface areas, while the use of the low-affinity solvent e.g acetone led to aggregated, macroporous materials due to microphase separation. Microstructural control was achieved by use of DMSO/acetone and pyridine/acetone solvent mixtures, which balanced gelation and phase separation to produce fine, homogeneous, mesoporous materials. Specifically, a 75% DMSO/acetone mixture yielded mechanically stable lignin polyurethane aerogels with a low envelope density of 0.49 g cm−3 and a specific surface area of ~300 m2 g−1. This study demonstrates a versatile approach to tailoring lignin polyurethane aerogels with adjustable textural and mechanical properties by simple adjustment of the solvent composition, highlighting the critical role of solvent–lignin interactions during gelation and offering a pathway to sustainable, high-performance materials.
24 June 2024 in Macromolecular Rapid Communications
Hydrophilicity is one important drawback of bio‐based aerogels. To overcome this issue, a novel approach for the preparation of mesoporous, water repellent aerogels is introduced, which combines synthesis of cross‐linked bio‐based copolymers from methacrylate copolymerizations, followed by solvent exchange and supercritical drying steps. The influence of monomers with different nonpolar ester groups (methyl, vanillin, tetrahydrofurfuryl) on textural properties and water contact angles of the dry products is assessed. Final aerogels show generally high overall porosities (≈96%), low densities (0.07–0.11 g cm−3) as well as fine, mainly mesoporous networks, and specific surface areas in the range of 120–240 m2 g−1. Hereby, choice of the methacrylate ester groups results in differences of the resulting pore‐size distributions. Water repellency tests show stable static water contact angles in the hydrophobic range (≈100°) achieved for the substrate containing the vanillin ester group. On the contrary the other substrates absorb water quickly, which indicates a decisive role of the ester group. The presented approach opens up a new pathway to bio‐based aerogels with intrinsic hydrophobicity. It is suggested that the properties are tailored by the choice of the monomer structure, hence enabling further adaption and optimization of the products.
This study introduces an integrated and scalable strategy for lignin coating of biopolymer aerogels by embedding the coating step directly into the solvent-exchange stage, thereby enabling in situ coating without additional post-processing. This integration represents a fundamental process innovation, converting a mandatory processing step into a scalable route for functionalization. Millimeter-sized alginate aerogel beads, used as a model polysaccharide system, retained their microstructure upon coating. Lignins with different molecular-weight (Mw) fractions were applied as single or multilayers to study layer formation and surface morphology, while coating functionality was evaluated by dynamic vapor sorption (DVS) using two distinct lignin types. Surface properties were analyzed by scanning electron microscopy (SEM), 3D profilometry, and time-of-flight secondary ion mass spectrometry (ToF-SIMS). ToF-SIMS revealed Mw as the key factor controlling penetration: low-Mw lignins diffused deeper, whereas higher-Mw fractions formed compact outer layers. DVS showed that optimized lignin coatings reduced moisture uptake compared to pristine alginate (~42 wt% at 90% relative humidity) to ~26 wt%. Covalent post-coating cross-linking further improved dimensional stability, limiting shrinkage to 21% at 70% relative humidity. Once layer formation is achieved, lignin molecular structure, especially when highly condensed, becomes more decisive for barrier performance than Mw alone.