In this work, nanostructured and transparent cellulose aerogels are synthesized via a purely salt induced approach from non‐modified microcrystalline cellulose type II. The production process requires in contrast to state of the art methods no pretreatment of cellulose or use of expensive cellulose‐solvents: it consists of hydrogel formation via cross‐linking of cellulose with calcium ions, a solvent exchange and a supercritical drying step. A systematic multiparameter study reveals that a high level of structural control is achievable: ratios of macro‐ to mesoporosity and the size of mesopores can be tailored by adjustment of the calcium ion content, while keeping a high overall porosity in the range of 92% – 96 %. The build‐up of homogeneous, fine pore structures results in a significant increase of the specific surface area as compared to conventional calcium‐free aerogels (684 vs. 300 m2 g−1). Remarkably, the Ca2+‐cross‐linking renders aerogels transparent, with Rayleigh scattering being the dominant scattering mechanism. Additional ion exchange to Ca2+ in the hydrogel‐state leads to further reduction of the pore size and to products with optimized optical properties, e.g., light transmission of 91% at an incidents light wavelength of 800 nm and a substrate thickness of 1.5 mm.
This study explores the innovative potential of native lignin as a sustainable biopolyol for synthesizing polyurethane aerogels with variable microstructures, significant specific surface areas, and high mechanical stability. Three types of lignin—Organosolv, Aquasolv, and Soda lignin—were evaluated based on structural characteristics, Klason lignin content, and particle size, with Organosolv lignin being identified as the optimal candidate. The microstructure of lignin polyurethane samples was adjustable by solvent choice: Gelation in DMSO and pyridine, with high affinity to lignin, resulted in dense materials with low specific surface areas, while the use of the low-affinity solvent e.g acetone led to aggregated, macroporous materials due to microphase separation. Microstructural control was achieved by use of DMSO/acetone and pyridine/acetone solvent mixtures, which balanced gelation and phase separation to produce fine, homogeneous, mesoporous materials. Specifically, a 75% DMSO/acetone mixture yielded mechanically stable lignin polyurethane aerogels with a low envelope density of 0.49 g cm−3 and a specific surface area of ~300 m2 g−1. This study demonstrates a versatile approach to tailoring lignin polyurethane aerogels with adjustable textural and mechanical properties by simple adjustment of the solvent composition, highlighting the critical role of solvent–lignin interactions during gelation and offering a pathway to sustainable, high-performance materials.
In this work, various natural tissues were for the first time directly converted into nanostructured aerogels by utilizing their intrinsic (meso-)porosity. In contrast to common aerogel production, no use of pure biopolymers, their extraction, dissolution, gelation or use of additives (e.g. crosslinkers, acids and bases) was necessary. The production process required washing of the wet starting material with water, a solvent exchange with ethanol and drying with supercritical CO2. The resulting materials exhibited low bulk densities (0.01–0.12 g cm−3), significant specific surface areas (108–446 m2 g−1) and mesopore volumes (0.3–2.6 cm3 g−1). Assessment of 20 different tissues including fruit pulp and peel, vegetable pulp, and mushrooms showed the generality of the approach. A broad spectrum of different microstructures was identified, whereas especially textural properties of samples derived from water rich pulp were highly similar to those found in classical biopolymer aerogels, for instance based on pectin or cellulose. Furthermore, the capability of the materials to structure liquid sunflower oil was shown: the produced oleogels exhibited exceptionally high oil uptake (max. 99%) and rheological properties similar to those of solid fats. Results suggest that supercritical drying of tissues (e.g. based on food waste) is a suitable approach for their upcycling into value added materials by a complete green and sustainable process. This research also contributes to sustainable development by transforming food waste into valuable aerogels and promoting science education through accessible, open-source STEM resources.
24 June 2024 in Macromolecular Rapid Communications
Hydrophilicity is one important drawback of bio‐based aerogels. To overcome this issue, a novel approach for the preparation of mesoporous, water repellent aerogels is introduced, which combines synthesis of cross‐linked bio‐based copolymers from methacrylate copolymerizations, followed by solvent exchange and supercritical drying steps. The influence of monomers with different nonpolar ester groups (methyl, vanillin, tetrahydrofurfuryl) on textural properties and water contact angles of the dry products is assessed. Final aerogels show generally high overall porosities (≈96%), low densities (0.07–0.11 g cm−3) as well as fine, mainly mesoporous networks, and specific surface areas in the range of 120–240 m2 g−1. Hereby, choice of the methacrylate ester groups results in differences of the resulting pore‐size distributions. Water repellency tests show stable static water contact angles in the hydrophobic range (≈100°) achieved for the substrate containing the vanillin ester group. On the contrary the other substrates absorb water quickly, which indicates a decisive role of the ester group. The presented approach opens up a new pathway to bio‐based aerogels with intrinsic hydrophobicity. It is suggested that the properties are tailored by the choice of the monomer structure, hence enabling further adaption and optimization of the products.
Hydrogels are soft, water-rich polymer networks whose mechanical behavior governs performance in applications from biomedicine to packed bed processes. In aerogel manufacturing, hydrogel particles represent a critical state where mechanical stability determines scalability and process reliability. Yet particle-scale, physically based models capturing deformation and rate dependence remain limited. Biopolymer-based hydrogel particles are investigated under uniaxial compression using monotonic, cyclic loading, and stress-relaxation experiments over several compression rates (0.1–3.0 mm/s). The hydrogels exhibit pronounced rate-dependent stiffening at low rates, followed by saturation above 0.5 mm/s, where Young’s modulus and Poisson’s ratio become effectively rate independent. Within the elastic regime (strain ≤ 0.5), the response is reproducible and hysteretic, while higher strains induce plastic deformation. A complementary DEM framework is introduced using tetrapod-shaped parcels qualitatively representing the load-bearing polymer network, while embedded spheres mimic the aqueous phase. Parameters are calibrated using full-factorial design and Bayesian optimization, then validated across multiple rates. Simulations reproduce force–strain behavior, elastic properties, and macroscopic deformation, while stochastic packings capture experimental variability. Stress relaxation and cyclic loading are captured qualitatively, though energy dissipation is overpredicted, indicating current limits in modeling viscoelastic damping. This approach advances predictive modeling and provides a basis for future solvent exchange and process-scale simulations.