Rokhsareh Akbarzadeh

Dr. Rokhsareh Akbarzadeh

Institue of Polymers and Composites, Hamburg University of Technology, Hamburg, Germany
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 October 2025 in Science and Technology of Advanced Materials
Verified
Journal Article
Open access
RARokhsareh Akbarzadeh
Rokhsareh Akbarzadeh
Mathias ErnstMathias Ernst
Mathias Ernst
RMRobert Meißner
Robert Meißner
Bodo FiedlerBodo Fiedler
Bodo Fiedler
Capacitive Deionization (CDI) has emerged as an energy-efficient and environmentally friendly technology for water desalination. This review provides a comprehensive analysis of CDI, covering both experimental and simulation approaches. It introduces the background, definition, and diverse applications of CDI, from water desalination to environmental monitoring and resource recovery. The review highlights CDI’s advantages, such as low energy consumption and operational simplicity, as well as its limitations, particularly its design-specific operating window favoring low-to-moderate salinity waters and sensitivity to organic-rich conditions. Strategies such as hybrid CDI systems and electrode surface functionalization are discussed to mitigate these challenges. Key working principles and advancements, including innovations in electrode materials, synthesis methods, and reactor design, are examined to improve ion removal efficiency, selectivity, energy use, and system durability. Material modification strategies are presented in the context of structure – performance relationships, emphasizing rational design principles. The review also explores simulation methods, including reactor modeling, computational fluid dynamics, molecular dynamics, and numerical approaches, and machine learning highlighting their synergy with experiments in optimizing CDI performance and guiding scale-up. Coupling CDI with other systems and its applications in water purification, particularly for ion and organic compound removal are also discussed. Finally, challenges in both experimental and simulation efforts, such as material cost, model complexity, computational demands, and scalability, are discussed. While CDI shows promise for sustainable water desalination and resource recovery, further research on hybrid configurations, predictive modeling, and pilot-scale validation is needed to address its limitations and enable large-scale adoption.

4 November 2020 in Environmental Science and Pollution Research
Verified
Journal Article
Closed access
PDF file
RARokhsareh Akbarzadeh
Rokhsareh Akbarzadeh
NFNegin Farhadian
Negin Farhadian
AAAnvar Asadi
Anvar Asadi
THTahereh Hasani
Tahereh Hasani
SMSetaya Salehi Morovat
Setaya Salehi Morovat

4 June 2020 in Journal of Molecular Modeling
Verified
Journal Article
Closed access
PDF file
Qusai IbrahimQusai Ibrahim
Qusai Ibrahim
RARokhsareh Akbarzadeh
Rokhsareh Akbarzadeh

18 July 2019 in Materials
Verified
Journal Article
Open access
PDF file
RARokhsareh Akbarzadeh
Rokhsareh Akbarzadeh
AAAnvar Asadi
Anvar Asadi
POPeter Ozaveshe Oviroh
Peter Ozaveshe Oviroh
Tien-Chien JenTien-Chien Jen
Tien-Chien Jen
A novel enhanced visible light absorption BiOCl/AgCl/BiVO4 heterojunction of photocatalysts could be obtained through a one-pot hydrothermal method used with two different pH solutions. There was a relationship between synthesis pH and the ratio of BiOCl to BiVO4 in XRD planes and their photocatalytic activity. The visible light photocatalytic performances of photocatalysts were evaluated via degradation of diclofenac (DCFF) as a pharmaceutical model pollutant. Furthermore, kinetic studies showed that DCF degradation followed pseudo-first-order kinetics. The photocatalytic degradation rates of BiOCl/AgCl/BiVO4 synthesized at pH = 1.2 and pH = 4 for DCF were 72% and 47%, respectively, showing the higher activity of the photocatalyst which was synthesized at a lower pH value. It was concluded that the excellent photocatalytic activity of BiOCl/AgCl/BiVO4 is due to the enhanced visible light absorption formation of a heterostructure, which increased the lifetime of photo-produced electron–hole pairs by creating a heterojunction. The influence of pH during synthesis on photocatalytic activity in order to create different phases was investigated. This work suggests that the BiOCl/AgCl/BiVO4 p-n heterojunction is more active when the ratio of BiOCl to BiVO4 is smaller, and this could be achieved simply by the pH adjustment. This is a promising method of modifying the photocatalyst for the purpose of pollutant degradation under visible light illumination.

10 May 2022 in Membranes
Verified
Journal Article
Open access
PDF file
RARokhsareh Akbarzadeh
Rokhsareh Akbarzadeh
PNPatrick Gathura Ndungu
Patrick Gathura Ndungu
In this study, BiOCl based nanocomposites were used as photocatalytic membranes for a simulated study on water desalination in reverse osmosis membrane systems. Through molecular dynamic simulation, the molecular structure of BiOCl, BiOCl/Ag2S and BiOCl/Bi2O3 heterojunctions were designed and their electronic properties, mechanical properties, and membrane performance for water desalination were evaluated for the first time. The molecular structure was created, and a geometry optimization task was used to optimize it. Material Studio 2019 CASTEP was used for simulation of the electronic and mechanical properties and water desalination was performed by ReaxFF software under pressures between 0 and 250 MPa. The novel BiOCl based nanocomposites showed improved electronic and mechanical properties and, most importantly, improvements in salt rejection and water permeability as compared to well-known materials such as graphene and MoS2. BiOCl and BiOCl/Ag2S had a bandgap around two, which is the ideal bandgap for semiconductor photocatalysts. A salt rejection of 98% was achieved under an applied pressure of 10 MPa. Salt rejection was higher for BiOCl/Bi2O3, while water permeability was higher for BiOCl/Ag2S. The monolayer BiOCl was unstable under pressures higher than 50 MPa, but the mechanical stability of BiOCl/Ag2S increased twofold and increased fourfold for BiOCl/Bi2O3, which is even higher than MoS2. However, between the three nanocomposites, BiOCl/Ag2S was found to be the most ideal photocatalytic nanocomposite membrane.

4 February 2022 in Heliyon
Verified
Journal Article
Open access
RARokhsareh Akbarzadeh
Rokhsareh Akbarzadeh
OAOlusola Olaitan Ayeleru
Olusola Olaitan Ayeleru
Qusai IbrahimQusai Ibrahim
Qusai Ibrahim
POPeter Apata Olubambi
Peter Apata Olubambi
PNPatrick Gathura Ndungu
Patrick Gathura Ndungu
DFT calculations using Material Studio (2019) were used to ascertain the changes in electronic properties of recycled expanded polystyrene (rEPS) after modification with nanoparticles of ZnS and ZnO. The nanocomposites were obtained using rEPS and suitable metal salt precursors via a solvothermal method. The XRD analysis was conducted to obtain the crystallography data of the new rEPS-based nanocomposites. Using Material Studio simulation software, the potential photocatalytic properties of the new prepared material was predicted and information on the electronic band structure was extracted. The calculated band gap values for rEPS and ZnS–ZnO-rEPS nanocomposite were 4.217 eV and 2.698 eV, respectively. Furthermore, our results showed that the nanocomposite is a p-type semiconductor. From the electronic structure and the band gap narrowing, these nanocomposites obtained from a waste material may have some potential in photocatalytic applications.