Ronnie Mativenga

Dr. Ronnie Mativenga

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 January 2020 in Electronics
Verified
Journal Article
Open access
PDF file
SCSuk-Joo Chae
Suk-Joo Chae
RMRonnie Mativenga
Ronnie Mativenga
JPJoon-Young Paik
Joon-Young Paik
MAMuhammad Attique
Muhammad Attique
Tae-Sun ChungTae-Sun Chung
Tae-Sun Chung
Flash memory is widely used in solid state drives (SSD), smartphones and so on because of their non-volatility, low power consumption, rapid access speed, and resistance to shocks. Due to the hardware features of flash memory that differ from hard disk drives (HDD), a software called FTL (Flash Translation Layer) was presented. The function of FTL is to make flash memory device appear as a block device to its host. However, due to the erase before write features of flash memory, flash blocks need to be constantly availed through the garbage collection (GC) of invalid pages, which incurs high-priced overhead. In the previous hybrid mapping schemes, there are three problems that cause GC overhead. First, operation of partial merge causes more page copies than operation of switch merge. However, many authors just concentrate on reducing operation of full merge. Second, the availability between a data block and a log block makes the space availability of the log block lower, and it also generates a very high-priced operation of full merge. Third, the space availability of the data block is low because the data block, which has many free pages, is merged. Therefore, we propose a new FTL named DSFTL (Dynamic Setting for FTL). In this FTL, we use many SW (sequential write) log blocks to increase operation of switch merge and to decrease operation of partial merge. In addition, DSFTL dynamically handles the data blocks and log blocks to reduce the operations of erase and the high-priced operation of full merge. Additionally, our scheme prevents the data block with many free pages from being merged to increase the space availability of the data block. Our extensive experimental results prove that our proposed approach (DSFTL) reduces the count of erase and increases the operation of switch merge. As a result, DSFTL decreases the garbage collection overhead.

25 July 2018 in Cluster Computing
Verified
Journal Article
Closed access
PDF file
RMRonnie Mativenga
Ronnie Mativenga
JPJoon-Young Paik
Joon-Young Paik
YKYoungjae Kim
Youngjae Kim
JLJunghee Lee
Junghee Lee
Tae-Sun ChungTae-Sun Chung
Tae-Sun Chung

25 September 2019 in IEEE Access
Verified
Journal Article
Open access
PHPrince Hamandawana
Prince Hamandawana
RMRonnie Mativenga
Ronnie Mativenga
SKSe Jin Kwon
Se Jin Kwon
Tae-Sun ChungTae-Sun Chung
Tae-Sun Chung
Many prior works have investigated on how to increase the job processing performance and energy efficient computing in large scale clusters. However, they employ serialized scheduling approaches encompassed with task straggler “hunting” techniques which launches speculative tasks after detecting slow tasks. These slow tasks are detected through node instrumentation which collects system level information whilst tracking the task execution progress. Such approaches are however detrimental towards achieving maximum processing performance and preserving cluster energy as they increase communication overheads. In this paper, we observe that node instrumentation and serialized scheduling in existing works does not only degrade the job processing performance, but also increase cluster energy consumption. To alleviate this, we propose EPPADS, a light-weight scheduler which eradicates the need for instrumentation modules for job scheduling purposes. EPPADS schedules tasks in two stages, the slow-start phase (SSP) and accelerate phase (AccP). The SSP schedules initial tasks in the queue using baseline FIFO scheduling and records the initial execution times of the processing nodes, whilst tagging the effective and straggling nodes. The AccP uses the initial execution times to compute the processing nodes task distribution ratio of remaining tasks and schedules them in parallel using a single scheduling I/O, boosting up the processing performance. To amortize the computing energy costs, EPPADS implements a power management module that coordinates with the scheduling module and leverage on node tagging information, to place nodes in two different power transition pools, i.e., high and low state power pools. A single power transition signal per pool is then broadcasted to lower or raise the energy state in the low-power state pool and high-power state pool. Our evaluation using a Hadoop cluster shows that EPPADS achieves 30% and 22% 15% to 20% energy savings as compared to the FIFO and DynMon schedulers, respectively.

27 September 2020 in Electronics
Verified
Journal Article
Open access
PDF file
RMRonnie Mativenga
Ronnie Mativenga
PHPrince Hamandawana
Prince Hamandawana
Tae-Sun ChungTae-Sun Chung
Tae-Sun Chung
JKJongik Kim
Jongik Kim
Flash memory prevalence has reached greater extents with its performance and compactness capabilities. This enables it to be easily adopted as storage media in various portable devices which includes smart watches, cell-phones, drones, and in-vehicle infotainment systems to mention but a few. To support large flash storage in such portable devices, existing flash translation layers (FTLs) employ a cache mapping table (CMT), which contains a small portion of logical page number to physical page number (LPN-PPN) mappings. For robustness, it is of importance to consider the CMT reconstruction mechanisms during system recovery. Currently, existing approaches cannot overcome the performance penalty after experiencing unexpected power failure. This is due to the disregard of the delay caused by inconsistencies between the cached page-mapping entries in RAM and their corresponding mapping pages in flash storage. Furthermore, how to select proper pages for reconstructing the CMT when rebooting a device needs to be revisited. In this study we address these problems and propose a fault tolerant power-failure recovery mechanism (FTRM) for flash memory storage systems. Our empirical study shows that FTRM is an efficient recovery and robust protocol.

12 September 2019 in IEEE Access
Verified
Journal Article
Open access
RMRonnie Mativenga
Ronnie Mativenga
PHPrince Hamandawana
Prince Hamandawana
SKSe Jin Kwon
Se Jin Kwon
Tae-Sun ChungTae-Sun Chung
Tae-Sun Chung
Although flash memory solid state drives (FSSDs) outperform traditional hard disk drives (HDDs), their performance still fails to cope up with the perennial doubling speeds of microprocessors, regardless of the available high bandwidth. To alleviate this bottleneck, many semiconductor companies, such as Intel, Micron, Samsung, and Hynix have already recently manufactured faster and more scalable non-volatile memory (NVM) technology as main memory but none so far have publicly announced their implementation or production of a full NVM Phase Change Memory SSD (PCM-SSD). Considering implementing NVM-PCM as secondary memory, we can build a future PCM-SSD (PSSD) to replace the slow traditional FSSD. However, a careful design, especially for the controller is essential to hide and manage PCM endurance constraints, in-place-updates ability, bit-addressability and enabling it to appear as a block device to the host as their predecessors (HDD and FSSD) do. In this paper, we propose implementing ExTENDS, a hardware assumption of NVM-PCM instead of the NVM-flash memory as our future secondary/persistent memory in storage systems. We further present a PCM file translation layer (PhaseFTL) that can efficiently manage address translations from a host file system to PCM while hiding PCM constrains and allowing the PCM blocks to wear down evenly. Moreover, PhaseFTL can efficiently manipulate the bit-addressability and in-place-update feature of PCM. Our experimental results shows that our proposed PSSD can improve overall SSD performance throughput by an average of 69% compared to traditional FSSDs.

1 September 2018
Verified
Conference Paper
Closed access
RMRonnie Mativenga
Ronnie Mativenga
PHPrince Hamandawana
Prince Hamandawana
SKSe Jin Kwon
Se Jin Kwon
Tae-Sun ChungTae-Sun Chung
Tae-Sun Chung
Even though flash memory Solid State Drives (FSSDs) outperformed traditional Hard Disk Drives (HDDs), they are still failing to reduce performance gap between microprocessors and storage in computer systems regardless of available high bandwidth. To alleviate this, we propose implementing PCM as main memory in SSDs to replace flash memory. In particular, we present a PCM File Translation Layer (PhaseFTL) that can efficiently manage address translations from host file system to PCM while allowing PCM memory blocks to wear down evenly. PhaseFTL hides PCM's constrains and does not suffer from cache miss because it's address translations are directly linked to the entire mapping table stored on fast PCM main memory.