SHIBAN Kishen KOUL

Prof. SHIBAN Kishen KOUL

Emeritus Professor at Indian Institute of Technology Delhi, India
orcid

Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 June 2019 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
ASAmit K. Singh
Amit K. Singh
MAMahesh P. Abegaonkar
Mahesh P. Abegaonkar
SKSHIBAN Kishen KOUL
SHIBAN Kishen KOUL
This paper presents a beam steerable low profile lens antenna with flat top wide beam and high gain operating at 10.10 GHz. It consists of graded index metasurface lens placed on the top of a microstrip patch antenna (MPA) radiator. Ultrathin linear graded index metasurface (LGIMS) and radial graded index metasurface (RGIMS) lens were designed for magnitude and phase transformation of the radiated beam from microwave radiator. First, LGIMS lens antenna was designed by placing LGIMS on the top of a MPA radiator at an optimum height. A maximum measured gain of 16.37 dBi indicating maximum gain enhancement of 11.50 dB with beam steering in a conical plane with vertex angle of 84° was observed. Next, a flat top beam (FTB) antenna with stable gain band was designed by placing RGIMS on top of LGIMS lens antenna. The measured peak gain of 14.82 dBi with flat top beam pattern having 1dB gain variation range of about 96° is observed. Further, movement of LGIMS and RGIMS on top of the radiator results in continuous beam scanning with maximum gain variation of 1 dB in a conical plane with vertex angle of about 100°. A maximum gain of 14.82 dBi with a maximum gain enhancement of 10.30 dB at 10.15 GHz was obtained due to linear and angular movement of LGIMS and RGIMS in FTB antenna. The simulated and measured results are in good agreement.

20 June 2018 in IEEE Transactions on Electromagnetic Compatibility
Verified
Journal Article
Closed access
ASAmit Kumar Singh
Amit Kumar Singh
MAMahesh P. Abegaonkar
Mahesh P. Abegaonkar
SKSHIBAN Kishen KOUL
SHIBAN Kishen KOUL
This paper describes a dual-band electromagnetic (EM) absorber for C- and X-band applications. The proposed structure consists of two circular ring resonators that are modified to make the absorber compact. The proposed absorber is demonstrated to be conformal, insensitive to polarization and angle of oblique incidence of incoming EM wave. To the authors’ knowledge, it is the thinnest absorber reported with a thickness of ${{\bm{\lambda }}_0}/142.65$ at lowest frequency of absorption. The absorption bands with absorption peaks of about 97% and 99% are observed at center frequencies of 4.19 and 9.75 GHz, respectively. The absorption frequency bandwidth (more than 90% of peak absorption) at these frequencies is 665 and 860 MHz, respectively. The double-band absorber can be extended to work at three frequencies by simply adding another ring between the two modified circular rings of dual-band absorber. The modified structure has absorption bandwidth of 610, 670, and 570 MHz with absorption peaks of 97.50%, 96.50%, and 98.85% at resonant center frequencies 4.19, 6.64, and 9.95 GHz, respectively. The temperature profile of the proposed absorber is measured by using lock-in infrared thermography and a temperature increase of 1.5 °C is observed at all the absorbing frequencies with transmitted RF power of 10 dBm. The experimental results agree well with the simulation results, and the proposed structure is insensitive for the transverse magnetic/transverse electric field polarization of incident waves and also the angle of incidence. It provides wide angular stability up to 45°. Along with a flat surface, the proposed absorbers are tested on a curved surface to exhibit its conformal nature.

26 June 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
MSMohammad Ayoub Sofi
Mohammad Ayoub Sofi
KSKushmanda Saurav
Kushmanda Saurav
SKSHIBAN Kishen KOUL
SHIBAN Kishen KOUL
In this article, a compact dual-band linear-to-circular polarization converter designed on a single-layer substrate is proposed. The unit cell of the converter has a size of 3.72 x 3.90 x 1.52 mm³ (0.0072λ³ₒ , λₒ is calculated with respect to 20.67 GHz). The converter consists of split rings and a pair of metallic strips printed on both sides of a single-layer substrate for dual-band operation. The proposed converter has a measured 3-dB axial ratio bandwidth of 5.56% (20.10-21.25 GHz) in the lower band and 3.97% (29.12-30.30 GHz) at the upper band. The converter transmits a right-hand circularly polarized (RHCP) wave at the lower band and left-hand circularly polarized (LHCP) wave at the upper band for a linearly polarized (LP) incident wave. The characteristics of the polarization converter are validated by integrating an array of 7 x 7 elements of its unit cell in the endfire direction of a dual-band LP dipole antenna operating in the same frequency bands such as that of the polarization converter. The antenna integrated with the polarization converter exhibits measured circularly polarized (CP) bandwidths of 7.80% and 6.57% in the lower frequency band: 20.10-21.75 GHz and the upper frequency band: 29.4-31.4 GHz, respectively. The integrated antenna can act as a feed source of a high-gain dual-band transmit array for uplink (30.0-31.0 GHz) and downlink (20.2-21.2 GHz) of Ka-band military satellite communication.

6 December 2021 in IEEE Access
Verified
Journal Article
Open access
SDSoumik Dey
Soumik Dey
SDSukomal Dey
Sukomal Dey
SKSHIBAN Kishen KOUL
SHIBAN Kishen KOUL
This paper proposes a hybrid decoupling method based on a novel electromagnetic bandgap (EBG) structure and hair-pin shaped defected ground structure (DGS) to obtain high isolation between 2-element multiple input multiple output (MIMO) antenna at 5G millimeter wave band over $27.5-28.35$ GHz. The proposed EBG designed on stacked dielectric substrates, achieves a wide frequency band-gap between $26.2-32.03$ GHz (20 %). A 2 $\times $ 3 array of the EBG is arranged between two electromagnetically coupled radiating patches in order to suppress the surface wave coupling. Substrate integrated waveguide (SIW) feeding network and cavity are strategically incorporated in the antenna design for improving the radiation performance and minimizing the losses from the feed. EBG shows an average isolation improvement of 13.9 dB within 5G band as compared to unloaded MIMO antenna. The additional reduction in coupling is achieved by placing hair-pin DGS (HP-DGS) on the ground plane, resulting in maximum isolation improvement of 47.7 dB at 27.94 GHz. The prototype of the MIMO was fabricated and experimentally verified. Measured peak isolation between the antennas is obtained as 71.9 dB, having a gain of 9 dBi and front to back ratio (FTBR) of 19.8 dB. A good diversity performance is also noticed for the designed MIMO with envelope correlation coefficient (ECC) of 0.00015, diversity gain (DG) of 9.99, and channel capacity loss (CCL) of 0.025 bits/Hz/sec. Later, SIW corporate feed network is designed for 4-element linear array loaded with EBG and HP-DGS to achieve higher gain and narrow beamwidth. The array was fabricated and the measured results are found in good accordance with the simulation results. The peak gain, beamwidth, and FTBR of the array are 13.3 dBi, 16.2°, and 19.97 dB respectively.

28 March 2022 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
MSMohammad Abdul Shukoor
Mohammad Abdul Shukoor
SDSukomal Dey
Sukomal Dey
SKSHIBAN Kishen KOUL
SHIBAN Kishen KOUL
This work presents a broadband linear–cross polarizer for K- and Ka-band applications. The design consists of a simple asymmetric width-based meander-line metasurface printed on a thin FR-4 grounded dielectric substrate. Normal incidence demonstrates 90% polarization conversion ratio (PCR) bandwidth (BW) of 20.64 GHz from 18.31 to 38.95 GHz with 72.1% fractional BW (FBW). Due to the destructive interference involved at greater oblique angles, reflective polarizers experience severe degradation of 90% PCR BW response. The proposed polarizer’s performance is obliquely stable up to 43° for transverse electric (TE) and 45° for transverse magnetic (TM) incidence with minimal 90% PCR BW reduction of only 13.95% (TE) and 15.25% (TM) compared with normal incidence. For the first time, transfer matrix method (TMM)-based equivalent surface impedance technique is modeled for oblique incidence analytically, closely resembling the full-wave analysis. The design is compact with a periodicity of $\lambda \text{o}$ /5.98 and a thickness of $\lambda \text{o}$ /13.69. The surface current patterns at resonant frequencies illustrate the reason behind broadband behavior. Bistatic radar cross section (RCS) analysis of the proposed converter is studied with reference to PEC. To the best of the author’s knowledge, this structure demonstrates broadband response with wide angular stability with less than 90% PCR BW reduction at higher oblique angles reported so far.

28 January 2022 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
SDSoumik Dey
Soumik Dey
SDSukomal Dey
Sukomal Dey
SKSHIBAN Kishen KOUL
SHIBAN Kishen KOUL
This communication presents the miniaturized low-profile second-order (SO) bandstop frequency selective surfaces (FSSs) for single- and dual-band resonances. The unit cell comprises two identical first-order (FO) elements in a back-to-back configuration with the metal grid in between. Two thin dielectric substrates separate the three metal layers. The proposed FO unit cell consists of intercell-connected spiral resonators (SRs) with capacitively coupled cross loop dipole. The SO filter response of the proposed FSS exhibits a wide stopband ( $S_{21} < -10$ dB) bandwidth (BW) of 27.6%. The unit cell has the periodicity of $0.162\lambda _{0}$ , where $\lambda _{0}$ is the free space wavelength at the lower passband. The novelty of the proposed work is a miniaturized simple unit cell geometry, at the millimeter-waveband but not limited to it, with polarization insensitive and high angular stable filter response up to 60° with small variations in the BW. An unconventional four-unit cell element FSS is designed for dual-band SO stopband resonances with the BWs of 8.3% and 13.8%. Prototypes of both FSSs were fabricated and their measured results were found consistent with the simulated filter responses.