1 January 2018 in Progress In Electromagnetics Research Letters
In this letter a four-port multi-input-multi-output (MIMO) antenna for 5G applications is proposed. This antenna is compact with a size of 11 mm × 31 mm excluding feed lines. The radiation patterns of the antenna show pattern diversity in the azimuthal plane, and each antenna element has an end-fire gain about 10 dBi by employing an array of metamaterial unit cells. The isolation between the antenna elements with edge to edge separation < λ 0 /5.5 at 28 GHz is enhanced by trimming the corners of the rectangular high refractive index metamaterial region along with a ground stub between antennas. The proposed antenna is fabricated, and each antenna element has return loss, S nn <-10 dB with isolation, S nm > 21 dB in the frequency range 26 GHz to 31 GHz, which makes this antenna potential candidate for MIMO application at 28 GHz band enabling 5G cellular communications.
20 June 2019 in IEEE Transactions on Antennas and Propagation
This paper presents a beam steerable low profile lens antenna with flat top wide beam and high gain operating at 10.10 GHz. It consists of graded index metasurface lens placed on the top of a microstrip patch antenna (MPA) radiator. Ultrathin linear graded index metasurface (LGIMS) and radial graded index metasurface (RGIMS) lens were designed for magnitude and phase transformation of the radiated beam from microwave radiator. First, LGIMS lens antenna was designed by placing LGIMS on the top of a MPA radiator at an optimum height. A maximum measured gain of 16.37 dBi indicating maximum gain enhancement of 11.50 dB with beam steering in a conical plane with vertex angle of 84° was observed. Next, a flat top beam (FTB) antenna with stable gain band was designed by placing RGIMS on top of LGIMS lens antenna. The measured peak gain of 14.82 dBi with flat top beam pattern having 1dB gain variation range of about 96° is observed. Further, movement of LGIMS and RGIMS on top of the radiator results in continuous beam scanning with maximum gain variation of 1 dB in a conical plane with vertex angle of about 100°. A maximum gain of 14.82 dBi with a maximum gain enhancement of 10.30 dB at 10.15 GHz was obtained due to linear and angular movement of LGIMS and RGIMS in FTB antenna. The simulated and measured results are in good agreement.
20 June 2018 in IEEE Transactions on Electromagnetic Compatibility
This paper describes a dual-band electromagnetic (EM) absorber for C- and X-band applications. The proposed structure consists of two circular ring resonators that are modified to make the absorber compact. The proposed absorber is demonstrated to be conformal, insensitive to polarization and angle of oblique incidence of incoming EM wave. To the authors’ knowledge, it is the thinnest absorber reported with a thickness of ${{\bm{\lambda }}_0}/142.65$ at lowest frequency of absorption. The absorption bands with absorption peaks of about 97% and 99% are observed at center frequencies of 4.19 and 9.75 GHz, respectively. The absorption frequency bandwidth (more than 90% of peak absorption) at these frequencies is 665 and 860 MHz, respectively. The double-band absorber can be extended to work at three frequencies by simply adding another ring between the two modified circular rings of dual-band absorber. The modified structure has absorption bandwidth of 610, 670, and 570 MHz with absorption peaks of 97.50%, 96.50%, and 98.85% at resonant center frequencies 4.19, 6.64, and 9.95 GHz, respectively. The temperature profile of the proposed absorber is measured by using lock-in infrared thermography and a temperature increase of 1.5 °C is observed at all the absorbing frequencies with transmitted RF power of 10 dBm. The experimental results agree well with the simulation results, and the proposed structure is insensitive for the transverse magnetic/transverse electric field polarization of incident waves and also the angle of incidence. It provides wide angular stability up to 45°. Along with a flat surface, the proposed absorbers are tested on a curved surface to exhibit its conformal nature.
26 July 2021 in IEEE Transactions on Antennas and Propagation
This paper presents a very thin metasurface (MS) planar lens for millimeter wave MIMO applications. The MS planar lens consists of array of mm-wave resonators providing varying phase response to transform the phase profile of the electromagnetic wave propagating through this array. Each resonator consists of two identical layers having substrate separated by an air gap of h=0.8mm and are 4mm × 4mm in size. The MS lens having a focal length of f=12mm is loaded to a three-port proximity fed antenna array to operate at 27.5 GHz to 32 GHz. the designed lens is polarization insensitive and can be used with any polarization. The three-port antennas with the MS lens is fabricated and tested, measured results have confirmed a beam scanning of ± 15° with a peak gain of 20.2dBi for port-2.
11 April 2019 in IEEE Antennas and Wireless Propagation Letters
A shared-aperture antenna with orthogonal pattern diversity is proposed in this letter. Both the ports have high gain and beam integrity for the operational bandwidth 27–30 GHz intended for the future mmWave 5G base stations. The measured mutual coupling is −18 dB at 28 GHz, and the endfire gains for the individual ports are 7–8 dBi in the band of interest. Hence, in order to achieve gain enhancement and equalization between the ports, a dual-polarized zero-index metamaterial is proposed and is strategically loaded with the shared-aperture antenna for simultaneous gain enhancement in both the ports. The measured mutual coupling post-integration is less than −22 dB at 28 GHz. The endfire gains for the orthogonal ports are in the range of 9.2–9.6 dBi and 1 dB gain bandwidth of 35% with an effective radiating volume of 0.09λ 0 3 . Detailed simulated and measured results are presented.
14 August 2020 in IEEE Sensors Journal
In this paper, through-the-wall human subject localization and respiration rate detection using a multi-channel Doppler radar is proposed. The proposed methodology is used to detect respiration signal of the subject when the environment between the radar and the subject is wood, glass or any other material which resembles real-life situations. A major achievement is that angular position of multiple human subjects and their respiration rates are estimated using this technique. The proposed system also removes the null point detection problem which is present in single channel CW radar system for vital sign detection. The noise level is reduced using cross-correlation between received signals from different channels. Also, the received signals from different channels are added in phase to improve the detection. The system is compact enough to be carried on a micro-drone. This work finds application in real-life situations such as earthquake, medical-care, building collapse and patient monitoring.