This paper suggests a method to improve the performances of the Dual Stator Axial Flux Spoke-type Permanent Magnet (DSAFSPM) machines with phase group concentrated coil (PGCC) windings, by incorporating continuous and discrete step-skewing along with a special winding connection. The purpose of the study is to mitigate the cogging torque and torque ripples while increasing the output torque so it ameliorates the machine performance at minimum cost for various applications such as wind power plants and electric vehicles (EVs). Cogging torque produces noise and vibrations which degrade the machine’s performance and reduces its life span. The proposed winding sequence enhances the output torque by improving its distribution factor along with the use of continuous skew and step-skew magnets. This research work improved the cogging torque and torque ripples with the help of skew techniques while output torque is increased by the proposed winding sequence. Further harmonics and ripples are also mitigated by the proposed winding sequence. The overall machine volume is kept constant along with the magnet size and the design parameters for fair performance analysis. Comparative analysis of these machines is performed using three-dimensional (3-D) time-stepped finite element analysis (FEA). Proposed model I and proposed model II reduce the harmonics by 42% and 23%, respectively. By using continuous skew and discrete step-skew magnets, cogging torque is reduced up to 81.5% and 75%, respectively. This reduction in cogging torque reduces the noise and vibration in machines which assists the machines to perform a smooth operation. The reduction in output torque ripples in proposed model I is 60.8% while that of proposed model II is 59.3%.
1 January 2021 in Applied Computational Electromagnetics Society Journal (ACES)
An outer rotor double permanent magnet (PM) excited flux switching generator is designed and optimized in this paper for direct drive wind turbine applications. This generator consists of two sets of PMs: ferrite PMs embedded in the stator yoke and neodymium PMs sandwiched between the rotor segments. In this regard, the main justification for employing ferrite PMs in the stator yoke is that the risk of demagnetization of ferrite PMs at high temperatures is lower than that of neodymium PMs (the temperature of the machine’s stationary parts is higher than that of its rotating parts). For the design of the machine, the Taguchi design of experiments is deployed, while a decision-making algorithm based on the technique for order of preference by similarity to the ideal solution is used to solve the contradiction that results from the Taguchi design of experiments in the multi-objective design optimization process. During the multi-objective design optimization steps, simultaneously maximizing the no-load phase voltage and minimizing the cogging torque and total harmonic distortion of the no-load phase voltage are defined as the objective functions. The optimally designed machine is prototyped and subsequently subjected to experimental validation to verify the predictions in satisfying the objective functions.
The optimization of the permanent magnet shape and dimension is crucial for the performance improvement of axial flux permanent magnet (AFPM) machines. In this paper, different magnet shapes are studied and compared based on the performance results. A new magnet shape is also proposed. The cogging torque is considered the most prominent noise source in axial flux permanent magnet (AFPM) machines. Different magnet shapes are analyzed and compared to optimize the efficiency of axial flux permanent magnet (AFPM) machines. Flat trapezoidal pole, curved pole and skewed pole are studied and analyzed and a new shape which is a combination of curved and skewed magnet shape is proposed to further reduce the cogging torque and improve the overall efficiency of axial flux permanent magnet (AFPM) machines. The study focuses on single-sided machines, but the results are valid even for double-sided machines and can be easily extended to other configurations.
This paper provides a technical analysis of the sensorless method using observer Luenberger for speed determination for controlling DC motor drives using a current sensor. The operation of the sensorless speed control of a DC motor was verified in MATLAB/Simulink and then experimentally implemented on setup hardware to make a comparison between the Luenberger estimated value and the real one using a speed meter keyed on the motor. From the data, it was possible to obtain the measurement error at various operating speeds.