Dimensionless expressions of exergy destruction, normalized to ambient temperature and heat capacity of the weaker stream, for all basic types of recuperators are derived. The analytical expressions for maximum exergy destruction were calculated using the GNU Octave software for all recuperators, namely parallel-flow and counter-flow recuperators, and all forms of cross-flow heat exchangers, namely without mixing of streams, only mixing the streamlines of the weaker stream, only mixing the streamlines of the stronger stream and mixing the weaker and stronger streams. For parallel-flow and counter-flow recuperators, as well as for their special cases, expressions for local and total exergy destruction are given. It is shown that the maximum exergy destruction, as a local extreme, is the same for all recuperators for mutually equal values of the quantities π3 (ratio of the heat capacity of the weaker stream to the heat capacity of the stronger stream) and πT (ratio of the inlet temperature of the stronger stream to the inlet temperature of the weaker stream). The ratio of exergy destruction to effectiveness of each basic type of recuperator is further analyzed. The obtained results are presented and interpreted in appropriate dimensionless diagrams.
The vacuum drying of cellulose-based insulation is an essential step in the transformer manufacturing process, typically consisting of both heat and vacuum application. The moisture inside cellulose insulation during this process is transferred by various transport mechanisms, some of which are affected by the insulation’s temperature. Moreover, the conditions within the vacuum chamber are generally transient and highly dynamic, depending on the employed process control strategy, and may include various phenomena, such as gas expansion during pump-down and radiative heat transfer. From a modelling perspective, these factors can significantly impact the drying rate by altering the boundary conditions of heat and mass transport equations. To account for such effects, a model that considers the process at both the scale of cellulose insulation and the scale of the vacuum chamber is presented. A simplified drying system with two-point process control is introduced to simulate multiple cases. The results highlight the sensitivity of drying behaviour to both the model parameters and the selected control strategy. A comparison with existing Fickian diffusion models indicates that the proposed model, when properly calibrated, can reliably reproduce drying dynamics and thus provide a powerful tool for optimizing vacuum drying procedures.
Journal de Physique IV, Journal de Physique Archives représente une mine d informations facile à consulter sur la manière dont la physique a été publiée depuis 1872.
The vacuum drying of cellulose-based insulation is an essential step in the transformer production process which usually consists of both heat and vacuum application. The moisture inside the cellulose insulation during this process is transferred by various transport mechanisms, some of which could be affected by temperature of the insulation as well. Furthermore, the conditions inside the vacuum chamber are generally transient and highly dynamic depending on the process control strategy and could include various types of phenomena such as gas expansion during the pump down process or heat transfer by radiation. Mathematically speaking, the above-mentioned conditions will have influence on the drying rate by altering the boundary conditions of heat and mass transport equations. In this study, a mathematical model that considers the process at both the scale of the cellulose insulation and the scale of the vacuum chamber is presented. By introducing a simplified drying system with two-point process control, a model test case and drying case were simulated. Model results demonstrated that chamber dynamics significantly affect drying behaviour. The proposed model could thus facilitate the estimation of total energy consumption and process duration, offering a valuable tool for optimization of vacuum drying procedures.