Satyapal Mahade

Dr. Satyapal Mahade

University West, Sweden

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 December 2018 in Materials
Verified
Journal Article
Open access
PDF file
ABArun Ramanathan Balachandramurthi
Arun Ramanathan Balachandramurthi
Johan MoverareJohan Moverare
Johan Moverare
SMSatyapal Mahade
Satyapal Mahade
Robert PedersonRobert Pederson
Robert Pederson
Alloy 718 finds application in gas turbine engine components, such as turbine disks, compressor blades and so forth, due to its excellent mechanical and corrosion properties at elevated temperatures. Electron beam melting (EBM) is a recent addition to the list of additive manufacturing processes and has shown the capability to produce components with unique microstructural features. In this work, Alloy 718 specimens were manufactured using the EBM process with a single batch of virgin plasma atomized powder. One set of as-built specimens was subjected to solution treatment and ageing (STA); another set of as-built specimens was subjected to hot isostatic pressing (HIP), followed by STA (and referred to as HIP+STA). Microstructural analysis of as-built specimens, STA specimens and HIP+STA specimens was carried out using optical microscopy and scanning electron microscopy. Typical columnar microstructure, which is a characteristic of the EBM manufactured alloy, was observed. Hardness evaluation of the as-built, STA and HIP+STA specimens showed that the post-treatments led to an increase in hardness in the range of ~50 HV1. Tensile properties of the three material conditions (as-built, STA and HIP+STA) were evaluated. Post-treatments lead to an increase in the yield strength (YS) and the ultimate tensile strength (UTS). HIP+STA led to improved elongation compared to STA due to the closure of defects but YS and UTS were comparable for the two post-treatment conditions. Fractographic analysis of the tensile tested specimens showed that the closure of shrinkage porosity and the partial healing of lack of fusion (LoF) defects were responsible for improved properties. Fatigue properties were evaluated in both STA and HIP+STA conditions. In addition, three surface conditions were also investigated, namely the ‘raw’ as-built surface, the machined surface with the contour region and the machined surface without the contour region. Machining off the contour region completely together with HIP+STA led to significant improvement in fatigue performance.

14 March 2016 in International Journal of Applied Ceramic Technology
Verified
Journal Article
Closed access
PDF file
SMSatyapal Mahade
Satyapal Mahade
RLRan Li
Ran Li
NCNicholas Curry
Nicholas Curry
SBStefan Björklund
Stefan Björklund
NMNicolaie Markocsan
Nicolaie Markocsan
PNPer Nylén
Per Nylén

5 December 2016 in Journal of Thermal Spray Technology
Verified
Journal Article
Closed access
PDF file
SMSatyapal Mahade
Satyapal Mahade
NCNicholas Curry
Nicholas Curry
SBStefan Björklund
Stefan Björklund
NMNicolaie Markocsan
Nicolaie Markocsan
PNPer Nylén
Per Nylén
RVRobert Vaßen
Robert Vaßen

11 July 2019 in Materials
Verified
Journal Article
Open access
PDF file
SMSatyapal Mahade
Satyapal Mahade
NCNicholas Curry
Nicholas Curry
SBStefan Björklund
Stefan Björklund
NMNicolaie Markocsan
Nicolaie Markocsan
Shrikant JoshiShrikant Joshi
Shrikant Joshi
Higher durability in thermal barrier coatings (TBCs) is constantly sought to enhance the service life of gas turbine engine components such as blades and vanes. In this study, three double layered gadolinium zirconate (GZ)-on-yttria stabilized zirconia (YSZ) TBC variants with varying individual layer thickness but identical total thickness produced by suspension plasma spray (SPS) process were evaluated. The objective was to investigate the role of YSZ layer thickness on the durability of GZ/YSZ double-layered TBCs under different thermal cyclic test conditions i.e., thermal cyclic fatigue (TCF) at 1100 °C and a burner rig test (BRT) at a surface temperature of 1400 °C, respectively. Microstructural characterization was performed using SEM (Scanning Electron Microscopy) and porosity content was measured using image analysis technique. Results reveal that the durability of double-layered TBCs decreased with YSZ thickness under both TCF and BRT test conditions. The TBCs were analyzed by SEM to investigate microstructural evolution as well as failure modes during TCF and BRT test conditions. It was observed that the failure modes varied with test conditions, with all the three double-layered TBC variants showing failure in the TGO (thermally grown oxide) during the TCF test and in the ceramic GZ top coat close to the GZ/YSZ interface during BRT. Furthermore, porosity analysis of the as-sprayed and TCF failed TBCs revealed differences in sintering behavior for GZ and YSZ. The findings from this work provide new insights into the mechanisms responsible for failure of SPS processed double-layered TBCs under different thermal cyclic test conditions.

14 January 2021 in Coatings
Verified
Journal Article
Open access
PDF file
SMSatyapal Mahade
Satyapal Mahade
AVAbhilash Venkat
Abhilash Venkat
NCNicholas Curry
Nicholas Curry
MLMatthias Leitner
Matthias Leitner
Shrikant JoshiShrikant Joshi
Shrikant Joshi
Thermal barrier coatings (TBCs) prolong the durability of gas turbine engine components and enable them to operate at high temperature. Several degradation mechanisms limit the durability of TBCs during their service. Since the atmospheric plasma spray (APS) processed 7–8 wt.% yttria stabilized zirconia (YSZ) TBCs widely utilized for gas turbine applications are susceptible to erosion damage, this work aims to evaluate the influence of their porosity levels on erosion behavior. Eight different APS TBCs were produced from 3 different spray powders with porosity ranging from 14% to 24%. The as-deposited TBCs were examined by SEM analysis. A licensed software was used to quantify the different microstructural features. Mechanical properties of the as-deposited TBCs were evaluated using micro-indentation technique. The as-deposited TBCs were subjected to erosion tests at different angles of erodent impact and their erosion performance was evaluated. Based on the results, microstructure-mechanical property-erosion performance was correlated. Findings from this work provide new insights into the microstructural features desired for improved erosion performance of APS deposited YSZ TBCs.

24 July 2019 in Materials
Verified
Journal Article
Open access
PDF file
SMSatyapal Mahade
Satyapal Mahade
KGKarthik Narayanan Giriprasad
Karthik Narayanan Giriprasad
SGSivakumar Govindarajan
Sivakumar Govindarajan
SBStefan Björklund
Stefan Björklund
NCNicholas Curry
Nicholas Curry
Shrikant JoshiShrikant Joshi
Shrikant Joshi
Titanium- and chromium-based carbides are attractive coating materials to impart wear resistance. Suspension plasma spraying (SPS) is a relatively new thermal spray process which has shown a facile ability to use sub-micron and nano-sized feedstock to deposit high-performance coatings. The specific novelty of this work lies in the processing of fine-sized titanium and chromium carbides (TiC and Cr3C2) in the form of aqueous suspensions to fabricate wear-resistant coatings by SPS. The resulting coatings were characterized by surface morphology, microstructure, phase constitution, and micro-hardness. The abrasive, erosive, and sliding wear performance of the SPS-processed TiC and Cr3C2 coatings was also evaluated. The results amply demonstrate that SPS is a promising route to manufacture superior wear-resistant carbide-based coatings with minimal in situ oxidation during their processing.