In the present study, indium tin oxide (ITO) was used as a transparent working electrode for the development of an electrochemical sensor for the detection of mercury (II) ions (Hg2+). The electrode was modified by direct electrodeposition of polyaniline (PANI), multiwalled carbon nanotubes (MWCNTs) and gold nanoparticles (AuNPs) followed by optimization of the analyte and operating conditions, aiming to improve the selectivity, sensitivity and reliability of the electrode for mercury detection. Successful immobilization of the PANI and nanomaterials (MWCNTs and AuNPs) on the ITO electrode was confirmed by Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDX) and Fourier Transform Infrared Spectroscopy (FTIR) analyses. The optimum conditions for mercury detection using the modified ITO electrode were pH 7.0 of Tris-HCl buffer (50 mM) in the presence of 1 mM methylene blue (MB) as a redox indicator, a scan rate of 0.10 V·s−1 and a 70 s interaction time. The electrochemical behavior of the modified electrode under the optimized conditions indicated a high reproducibility and high sensitivity of mercury detection. It is therefore suggested that the PANI/MWCNT/AuNP-modified ITO electrode could be a promising material for the development of on-site mercury detection tools for applications in fields such as diagnostics, the environment, safety and security controls or other industries.
An efficient and economical treatment technology for heavy metal removal from the electroplating wastewaters is needed for the water purification. Therefore, pure cellulosic materials were derived from two waste fiber (pandanus fruit and durian rind) and conversion of the cellulose into the poly(acrylonitrile)-grafted material was accomplished by free radical grafting system. Thereafter, poly(amidoxime) ligand was produced from the grafted materials. Sorption capacity (qe) of several toxic metals ions was found to be high, e.g., copper capacity (qe) was 298.4 mg g−1 at pH 6. In fact, other metal ions, such as cobalt chromium and nickel also demonstrated significant sorption capacity at pH 6. Sorption mechanism played acceptable meet with pseudo second-order rate of kinetic pattern due to the satisfactory correlation with the experimental sorption values. A significant correlation coefficient (R2 > 0.99) with Langmuir model isotherm showed the single or monolayer sorption occurred on the surfaces. The reusability study showed that the polymer ligand can be useful up to six cycles with minimum loss (7%) of efficiency and can be used in the extraction of toxic metal ions present in the wastewaters. Therefore, two types of electroplating wastewater were used in this study, one containing high concentration of copper (23 ppm) and iron (32 ppm) with trace level of others heavy metals (IWS 1) and another containing high concentration of copper (85.7 ppm) only with trace level of others heavy metals (IWS 2). This polymeric ligand showed acceptable removal magnitude, up to 98% of toxic metal ions can be removed from electroplating wastewater.
Industrial operations, domestic and agricultural activities worldwide have had major problems with various contaminants caused by environmental pollution. Heavy metal pollution in wastewater also a prominent issue; therefore, a well built and economical treatment technology is demanded for pollution-free wastewater. The present work emphasized pure cellulose extracted from jute fiber and further modification was performed by a free radical grafting reaction, which resulted in poly(methyl acrylate) (PMA)-grafted cellulose and poly(acrylonitrile)-grafted cellulose. Subsequently, poly(hydroxamic acid) and poly(amidoxime) ligands were prepared from the PMA-grafted cellulose and PAN-grafted cellulose, respectively. An adsorption study was performed using the desired ligands with heavy metals such as copper, cobalt, chromium and nickel ions. The binding capacity (qe) with copper ions for poly(hydroxamic acid) is 352 mg g−1 whereas qe for poly(amidoxime) ligand it was exhibited as 310 mg g−1. Other metal ions (chromium, cobalt and nickel) show significance binding properties at pH 6. The Langmuir and Freundlich isotherm study was also performed. The Freundlich isotherm model showed good correlation coefficients for all metal ions, indicating that multiple-layers adsorption was occurred by the polymer ligands. The reusability was evaluated and the adsorbents can be reused for 7 cycles without significant loss of removal performance. Both ligands showed outstanding metals removal capacity from the industrial wastewater as such 98% of copper can be removed from electroplating wastewater and other metals (cobalt, chromium, nickel and lead) can also be removed up to 90%.