This paper presents a parametric study of classical additive 3D-printing settings for use on conductive filaments in applications for high-frequency topologies. First, a wideband characterization was conducted, printing a microstrip transmission line using a conductive filament with variations of typical 3D-printing settings, such as layer height, infill percentage, and infill pattern. The measurement results show a dependence on the high-frequency transmission parameters with respect to the infill percentage and the infill pattern. Finally, two antennas were 3D-printed using conductive material, a microstrip patch, and a low-weight pyramidal horn antenna. The results for the patch agree with the losses found on the line measurements, while the low-weight pyramidal horn exhibits no major differences compared with its equivalent antenna, made using perfect conductors.

This article shows how to create a robust thermal face recognition system based on the FaceNet architecture. We propose a method for generating thermal images to create a thermal face database with six different attributes (frown, glasses, rotation, normal, vocal, and smile) based on various deep learning models. First, we use StyleCLIP, which oversees manipulating the latent space of the input visible image to add the desired attributes to the visible face. Second, we use the GANs N’ Roses (GNR) model, a multimodal image-to-image framework. It uses maps of style and content to generate thermal imaging from visible images, using generative adversarial approaches. Using the proposed generator system, we create a database of synthetic thermal faces composed of more than 100k images corresponding to 3227 individuals. When trained and tested using the synthetic database, the Thermal-FaceNet model obtained a 99.98% accuracy. Furthermore, when tested with a real database, the accuracy was more than 98%, validating the proposed thermal images generator system.

Human gait analysis is a standard method used for detecting and diagnosing diseases associated with gait disorders. Wearable technologies, due to their low costs and high portability, are increasingly being used in gait and other medical analyses. This paper evaluates the use of low-cost homemade textile pressure sensors to recognize gait phases. Ten sensors were integrated into stretch pants, achieving an inexpensive and pervasive solution. Nevertheless, such a simple fabrication process leads to significant sensitivity variability among sensors, hindering their adoption in precision-demanding medical applications. To tackle this issue, we evaluated the textile sensors for the classification of gait phases over three machine learning algorithms for time-series signals, namely, random forest (RF), time series forest (TSF), and multi-representation sequence learner (Mr-SEQL). Training and testing signals were generated from participants wearing the sensing pants in a test run under laboratory conditions and from an inertial sensor attached to the same pants for comparison purposes. Moreover, a new annotation method to facilitate the creation of such datasets using an ordinary webcam and a pose detection model is presented, which uses predefined rules for label generation. The results show that textile sensors successfully detect the gait phases with an average precision of 91.2% and 90.5% for RF and TSF, respectively, only 0.8% and 2.3% lower than the same values obtained from the IMU. This situation changes for Mr-SEQL, which achieved a precision of 79% for the textile sensors and 36.8% for the IMU. The overall results show the feasibility of using textile pressure sensors for human gait recognition.

Electrical trees are one of the main degradation processes leading to failure of high voltage polymeric insulation. Electrical trees grow under the effect of partial discharges (PD), which can be measured and analyzed for condition monitoring of electrical insulation. In this paper, techniques that are normally used for classification of PD and noise separation were explored in their ability to determine the stage of growth of electrical trees: Spectral Power Clustering Technique (SPCT), Time-Frequency (TF) maps and Chromatic Technique (CT). The techniques allowed to analyze PD signals captured in ultra-high frequency (UHF) range with an antenna during tree growth. Laboratory treeing-samples were made of epoxy resin and trees were generated at six different excitation frequencies: 0.1, 10, 50, 150, 250 and 350 Hz. The results showed that two parameters, part of SPCT and TF maps, were sensitive to the tree progression and showed a consistent relation with the length of the tree: the low-frequency power ratio and the equivalent bandwidth. These two parameters were selected to create a new map, proposed for the characterization of electrical tree growth, which is more consistent and robust than the original separation maps. It was found that the low-frequency content of PD pulses proportionally increased with tree propagation.

This article presents a wireless sensor for pest detection, specifically the Lobesia botrana moth or vineyard moth. The wireless sensor consists of an acoustic-based detection of the sound generated by a flying Lobesia botrana moth. Once a Lobesia botrana moth is detected, the information about the time, geographical location of the sensor and the number of detection events is sent to a server that gathers the detection statistics in real-time. To detect the Lobesia botrana, its acoustic signal was previously characterized in a controlled environment, obtaining its power spectral density for the acoustic filter design. The sensor is tested in a controlled laboratory environment where the detection of the flying moths is successfully achieved in the presence of all types of environmental noises. Finally, the sensor is installed on a vineyard in a region where the moth has already been detected. The device is able to detect flying Lobesia botrana moths during its flying period, giving results that agree with traditional field traps.

This paper gives a brief introduction to noise development in switched reluctance machines (SRMs) and presents psychoacoustic quantities that allow an objective evaluation of their sound quality by taking into account the characteristics of the human hearing system. The relevance of these quantities is determined by listening tests and statistical analyses. The goal of this work is to demonstrate that a successful acoustic optimization of a SRM should be performed based on both technical and psychoacoustic know-how