Carlos Madariaga-Cifuentes

Dr. Carlos Madariaga-Cifuentes

University of Concepción
+1
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2019 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Carlos Madariaga-CifuentesCarlos Madariaga-Cifuentes
Carlos Madariaga-Cifuentes
Werner JaraWerner Jara
Werner Jara
JTJuan Tapia
Juan Tapia
JPJuha Jaakko Pyrhonen
Juha Jaakko Pyrhonen
TLTutkijaopettaja Pia Lindh
Tutkijaopettaja Pia Lindh
JRJavier Riedemann
Javier Riedemann
This paper presents a methodology for the analytical computation of the slot leakage inductance of tooth-coil winding (TCW) permanent magnet synchronous machines (PMSMs). Generalized equations for the slot leakage inductance of the whole phase are derived, suitable for several slot-pole combinations, and meant to be used during the machine design stage. For simplicity, self- and mutual-inductance components are formulated using the classical method with detailed permeance determination for both horizontal and vertical distribution of coil sides in the slots, considering a straight-line path for the flux leakage. Several slot-pole combinations were simulated by means of Finite Element (FE) method in order to validate the analytical equations, both approaches, FE and analytical, showing adequate concordance.

29 September 2020 in Electronics
Verified
Journal Article
Open access
PDF file
Carlos Madariaga-CifuentesCarlos Madariaga-Cifuentes
Carlos Madariaga-Cifuentes
Werner JaraWerner Jara
Werner Jara
DRDanilo Riquelme
Danilo Riquelme
Gerd BramerdorferGerd Bramerdorfer
Gerd Bramerdorfer
JTJuan Tapia
Juan Tapia
JRJavier Riedemann
Javier Riedemann
This paper analyzes the impact of manufacturing tolerances on the cogging torque of a 24-slot 28-pole tooth-coil-winding permanent magnet synchronous machine with a modular stator core (TCW-MPMSM). Dimensional tolerances and asymmetries associated with the modular topology are studied by means of finite element simulations in order to identify key parameters that increase the cogging torque above the expected values of a faultless machine. Among five selected dimensional parameters, it was found that angular displacement, radial displacement, and tooth–tip width deviations of the stator segments have the most significant impact on the cogging torque. Considering these three key parameters, a full-range tolerance analysis is carried out by means of a proposed superposition-based approach, evaluating all possible combinations of typical deviation values. It is concluded that the cogging torque increment, generated by tolerances, is relatively independent of the faultless tooth–tip width of the stator segments and the arc-to-pole ratio. Robustness of the TCW-MPMSM, regarding cogging torque generation, depends on both the tightness of the tolerances handled in the manufacturing process and the rated cogging torque: the lower the cogging torque of the ideal machine, the less robust is the machine and, therefore, manufacturing imperfections will be required to be tightened.

11 July 2024 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Carlos Madariaga-CifuentesCarlos Madariaga-Cifuentes
Carlos Madariaga-Cifuentes
Cesar GallardoCesar Gallardo
Cesar Gallardo
NRNicolás Reyes
Nicolás Reyes
JTJuan Tapia
Juan Tapia
Werner JaraWerner Jara
Werner Jara
MDMichele Degano
Michele Degano
This paper presents the design and evaluation of a new axial-flux low-speed and high-torque matrix-rotor induction machine. Iron wires embedded in a cupper matrix comprise the solid rotor structure. Specific design and sizing equations are provided focusing on key rotor parameters: the iron/copper ratio and iron wire diameter. The analysis was carried out through analytical equations and three-dimensional finite element simulations. Based on the proposed design guidelines, A 20 HP, 250 rpm prototype was built and evaluated for experimental validation. Good concordance was obtained between the different stages of the matrix-rotor induction machine design: the initial sizing recommendations, finite element simulations and experimental results. Moreover, the proposed machine is suitable for low-speed high-torque applications, although there is room for further optimization depending on specific application needs.

9 May 2023 in Machines
Verified
Journal Article
Open access
PDF file
AEAndrés Escobar
Andrés Escobar
GSGonzalo Sánchez
Gonzalo Sánchez
Werner JaraWerner Jara
Werner Jara
Carlos Madariaga-CifuentesCarlos Madariaga-Cifuentes
Carlos Madariaga-Cifuentes
JTJuan Tapia
Juan Tapia
EREduardo Reyes
Eduardo Reyes
Axial Flux Permanent Magnet (AFPM) machines with ironless rotors are an attractive and recently studied solution in low-speed applications, due to their potentially high power/weight ratio, high aspect ratio, and high efficiency. Nevertheless, these machines are prone to be affected by manufacturing tolerance during its fabrication process and consequently, the magnets may move freely inside the rotor structure. This work presents a statistical analysis of manufacturing tolerances of an AFPM machine with an ironless rotor, considering several magnet fault types. A computationally efficient superposition method is developed and implemented to obtain both the cogging torque and rated torque considering several tolerance combinations with acceptable accuracy. The results obtained from a statistical analysis of 10,000 designs of a two-stator one rotor tooth coil winding AFPM (TCW-AFPM) machine allowed us to identify the parameters with the most impact on relevant performance indicators and disclosed a substantial increase in cogging and ripple torque when unavoidable combined tolerances are present.
1

26 April 2021 in IEEE Access
Verified
Journal Article
Open access
Carlos Madariaga-CifuentesCarlos Madariaga-Cifuentes
Carlos Madariaga-Cifuentes
RSRoger Schurch
Roger Schurch
JRJorge Alfredo Ardila Rey
Jorge Alfredo Ardila Rey
OMOsvaldo Munoz
Osvaldo Munoz
SFSebastian Fingerhuth
Sebastian Fingerhuth
Electrical trees are one of the main degradation processes leading to failure of high voltage polymeric insulation. Electrical trees grow under the effect of partial discharges (PD), which can be measured and analyzed for condition monitoring of electrical insulation. In this paper, techniques that are normally used for classification of PD and noise separation were explored in their ability to determine the stage of growth of electrical trees: Spectral Power Clustering Technique (SPCT), Time-Frequency (TF) maps and Chromatic Technique (CT). The techniques allowed to analyze PD signals captured in ultra-high frequency (UHF) range with an antenna during tree growth. Laboratory treeing-samples were made of epoxy resin and trees were generated at six different excitation frequencies: 0.1, 10, 50, 150, 250 and 350 Hz. The results showed that two parameters, part of SPCT and TF maps, were sensitive to the tree progression and showed a consistent relation with the length of the tree: the low-frequency power ratio and the equivalent bandwidth. These two parameters were selected to create a new map, proposed for the characterization of electrical tree growth, which is more consistent and robust than the original separation maps. It was found that the low-frequency content of PD pulses proportionally increased with tree propagation.

1 September 2019
Verified
Conference Paper
Closed access
Carlos Madariaga-CifuentesCarlos Madariaga-Cifuentes
Carlos Madariaga-Cifuentes
WJWerner Jara
Werner Jara
JTJuan Tapia
Juan Tapia
JRJavier Riedemann
Javier Riedemann
GBGerd Bramerdorfer
Gerd Bramerdorfer
BSBulent Sarlioglu
Bulent Sarlioglu
This paper presents an analytical model of U-shape tooth-coil-winding modular permanent magnet synchronous machines (TCW-MPMSMs) in terms of main design parameters. Analytical expressions for the flux density distribution, back EMF, and electromagnetic torque were derived. 2-D finite element (FE) simulations for a 24-slot 28-pole machine for several tooth tip widths were compared to validate the proposed equations. Comparison of analytical solutions and FE results showed good agreement for a range of feasible slot openings. Also, a sensitivity analysis through the analytical expressions was developed. By using proposed analytical models, the performance of the modular machine can be significantly improved by selecting optimum values of key parameters including the dimensions of tooth tips and PMs.