A series of Al_xGa_(1−x)As ternary alloys were grown by molecular beam epitaxy (MBE) at the technologically relevant composition range, x < 0.45, and characterized using spectroscopic ellipsometry to provide accurate refractive index values in the wavelength region below the bandgap. Particular attention is given to O-band and C-band telecommunication wavelengths around 1.3 µm and 1.55 µm, as well as at 825 nm. MBE gave a very high accuracy for grown layer thicknesses, and the alloys’ precise compositions and bandgap values were confirmed using high-resolution x-ray diffraction and photoluminescence, to improve the refractive index model fitting accuracy. This work is the first systematic study for MBE-grown Al_xGa_(1−x)As across a wide spectral range. In addition, we employed a very rigorous measurement-fitting procedure, which we present in detail.

The aim of this research is to implement a precise Wi-Fi indoor positioning system (IPS) or localization system based upon the IEEE 802.11mc fine-timing measurement (FTM) scheme also known as the Wi-Fi round trip time (RTT) ranging technique, where ranging refers to a sub-process of positioning that determines the distance between a transmitter and receiver. Our system and its algorithms were implemented using a COTS (Commercial-Off-The-Shelf) smartphone and Wi-Fi access points. Experiments were conducted in several real-life indoor environments. This paper presents the detailed Wi-Fi RTT ranging performance of these devices in different system configurations and characterizes the systematic biases and noise model to improve the ranging accuracy. A novel three-step-positioning method is proposed to overcome the issues of no or multiple intersect points in trilateration due to ranging errors to improve positioning accuracy. This consists of the following: 1) systematic bias determination and removal; 2) clustering-based trilateration (CbT) supported by weighted concentric circle generation (WCCG), namely CbT & WCCG; 3) positioning result and trajectory optimization using a Kalman filter. As a result, the evaluation experiments gave a position accuracy of ±1.2 m in 2D static positioning and ±1.3 m for dynamic motion tracking. Also, our CbT & WCCG method demonstrate good tolerance against ranging errors. Moreover, the computational cost and positioning accuracy of CbT & WCCG methods are compared with least square (LS) and recursive least square (RLS) methods and the accuracy standard deviation of our algorithm is the closest to the Cramer–Rao bound (CRB).

The Levenberg-Marquardt (LM) algorithm is a nonlinear parameter learning algorithm that converges accurately and quickly. This paper demonstrates for the first time to our knowledge, a real-time implementation of the LM algorithm on field programmable gate arrays (FPGAs). It was used to train neural networks to solve the eXclusive Or function (XOR), and for 3D-to-2D camera calibration parameter estimation. A Xilinx Virtex-5 ML506 was used to implement the LMA as a hardware-in-the-loop system. The XOR function was approximated in only 13 iterations from zero initial conditions, usually the same function is approximated in thousands of iterations using the error backpropagation algorithm. Also, this type of training not only reduced the number of iterations but also achieved a speed up in excess of 3 ×10 ⁶ when compared to the software implementation. A real-time camera calibration and parameter estimation was performed successfully on FPGAs. Compared to the software implementation the FPGA implementation led to an increase in the mean squared error and standard deviation by only 17.94% and 8.04% respectively. The FPGA increased the calibration speed by a factor of 1.41 × 10 ⁶ . There are a wide range of systems problems solved via nonlinear parameter optimization, this study demonstrated that a hardware solution for systems such as automated optical inspection systems or systems dealing with projective geometry estimation and motion compensation systems in robotic vision systems is possible in real time.

Every year, for ten years now, the IPIN competition has aimed at evaluating real-world indoor localisation systems by testing them in a realistic environment, with realistic movement, using the EvAAL framework. The competition provided a unique overview of the state-of-the-art of systems, technologies, and methods for indoor positioning and navigation purposes. Through fair comparison of the performance achieved by each system, the competition was able to identify the most promising approaches and to pinpoint the most critical working conditions. In 2020, the competition included 5 diverse off-site off-site Tracks, each resembling real use cases and challenges for indoor positioning. The results in terms of participation and accuracy of the proposed systems have been encouraging. The best performing competitors obtained a third quartile of error of 1 m for the Smartphone Track and 0.5 m for the Foot-mounted IMU Track. While not running on physical systems, but only as algorithms, these results represent impressive achievements.

IPIN 2019 Competition, sixth in a series of IPIN competitions, was held at the CNR Research Area of Pisa (IT), integrated into the program of the IPIN 2019 Conference. It included two on-site real-time Tracks and three off-site Tracks. The four Tracks presented in this paper were set in the same environment, made of two buildings close together for a total usable area of 1000 m 2 outdoors and and 6000 m 2 indoors over three floors, with a total path length exceeding 500 m. IPIN competitions, based on the EvAAL framework, have aimed at comparing the accuracy performance of personal positioning systems in fair and realistic conditions: past editions of the competition were carried in big conference settings, university campuses and a shopping mall. Positioning accuracy is computed while the person carrying the system under test walks at normal walking speed, uses lifts and goes up and down stairs or briefly stops at given points. Results presented here are a showcase of state-of-the-art systems tested side by side in real-world settings as part of the on-site real-time competition Tracks. Results for off-site Tracks allow a detailed and reproducible comparison of the most recent positioning and tracking algorithms in the same environment as the on-site Tracks.