Shikuan Jin

Dr. Shikuan Jin

Wuhan University, Wuhan, Hubei, China
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 October 2019 in Natural Hazards and Earth System Sciences
Verified
Journal Article
Open access
PDF file
LCLixia Chen
Lixia Chen
Zizheng GuoZizheng Guo
Zizheng Guo
KYKunlong Yin
Kunlong Yin
Dhruba Pikha ShresthaDhruba Pikha Shrestha
Dhruba Pikha Shrestha
SJShikuan Jin
Shikuan Jin
Land use and land cover change can increase or decrease landslide susceptibility (LS) in the mountainous areas. In the hilly and mountainous part of southwestern China, land use and land cover change (LUCC) has taken place in the last decades due to infrastructure development and rapid economic activities. This development and activities can worsen the slope susceptible to sliding due to mostly the cutting of slopes. This study, taking Zhushan Town, Xuan'en County, as the study area, aims to evaluate the influence of land use and land cover change on landslide susceptibility at a regional scale. Spatial distribution of landslides was determined in terms of visual interpretation of aerial photographs and remote sensing images, supported by field surveys. Two types of land use and land cover (LUC) maps, with a time interval covering 21 years (1992–2013), were prepared: the first was obtained by the neural net classification of images acquired in 1992 and the second by the object-oriented classification of images in 2002 and 2013. Landslide-susceptible areas were analyzed using the logistic regression model (LRM) in which six influencing factors were chosen as the landslide susceptibility indices. In addition, the hydrologic analysis method was applied to optimize the partitioning of the terrain. The results indicated that the LUCC in the region was mainly the transformation from the grassland and arable land to the forest land, which is increased by 34.3 %. An increase of 1.9 % is shown in the area where human engineering activities concentrate. The comparison of landslide susceptibility maps among different periods revealed that human engineering activities were the most important factor in increasing LS in this region. Such results emphasize the requirement of a reasonable land use planning activity process.

10 March 2023 in Atmospheric Chemistry and Physics
Verified
Journal Article
Open access
PDF file
BLBoming Liu
Boming Liu
XMXin Ma
Xin Ma
Jianping GuoJianping Guo
Jianping Guo
HLHui Li
Hui Li
SJShikuan Jin
Shikuan Jin
WGWei Gong
Wei Gong
Accurate estimation of wind speed at wind turbine hub height is of significance for wind energy assessment and exploitation. Nevertheless, the traditional power law method (PLM) generally estimates the hub-height wind speed by assuming a constant exponent between surface and hub-height wind speed. This inevitably leads to significant uncertainties in estimating the wind speed profile especially under unstable conditions. To minimize the uncertainties, we here use a machine learning algorithm known as random forest (RF) to estimate the wind speed at hub heights such as at 120 m (WS120), 160 m (WS160), and 200 m (WS200). These heights go beyond the traditional wind mast limit of 100–120 m. The radar wind profiler and surface synoptic observations at the Qingdao station from May 2018 to August 2020 are used as key inputs to develop the RF model. A deep analysis of the RF model construction has been performed to ensure its applicability. Afterwards, the RF model and the PLM model are used to retrieve WS120, WS160, and WS200. The comparison analyses from both RF and PLM models are performed against radiosonde wind measurements. At 120 m, the RF model shows a relatively higher correlation coefficient R of 0.93 and a smaller RMSE of 1.09 m s−1, compared with the R of 0.89 and RMSE of 1.50 m s−1 for the PLM. Notably, the metrics used to determine the performance of the model decline sharply with height for the PLM model, as opposed to the stable variation for the RF model. This suggests the RF model exhibits advantages over the traditional PLM model. This is because the RF model considers well the factors such as surface friction and heat transfer. The diurnal and seasonal variations in WS120, WS160, and WS200 from RF are then analyzed. The hourly WS120 is large during daytime from 09:00 to 16:00 local solar time (LST) and reach a peak at 14:00 LST. The seasonal WS120 is large in spring and winter and is low in summer and autumn. The diurnal and seasonal variations in WS160 and WS200 are similar to those of WS120. Finally, we investigated the absolute percentage error (APE) of wind power density between the RF and PLM models at different heights. In the vertical direction, the APE is gradually increased as the height increases. Overall, the PLM algorithm has some limitations in estimating wind speed at hub height. The RF model, which combines more observations or auxiliary data, is more suitable for the hub-height wind speed estimation. These findings obtained here have great implications for development and utilization in the wind energy industry in the future.

3 September 2021 in Atmospheric Measurement Techniques
Verified
Journal Article
Open access
PDF file
HLHui Li
Hui Li
Liu BomingLiu Boming
Liu Boming
XMXin Ma
Xin Ma
SJShikuan Jin
Shikuan Jin
YMYingying Ma
Yingying Ma
WGWei Gong
Wei Gong
Radiosonde (RS) is widely used to detect the vertical structures of the planetary boundary layer (PBL), and numerous methods have been proposed for retrieving PBL height (PBLH) from RS data. However, an algorithm that is suitable under all atmospheric conditions does not exist. This study evaluates the performance of four common PBLH algorithms under different thermodynamic stability conditions based on RS data collected from nine sites in January–December 2019. The four RS algorithms are the potential temperature gradient method (GMθ), relative humidity (RH) gradient method (GMRH), parcel method (PM) and Richardson number method (RM). Atmospheric conditions are divided into convective boundary layer (CBL), neutral boundary layer (NBL) and stable boundary layer (SBL) on the basis of the potential temperature profile. Results indicate that SBL is dominant at nighttime, whilst CBL dominates at daytime. Under all and SBL classifications, PBLH retrieved by RM is typically higher than those retrieved using the other methods. On the contrary, the PBLH result retrieved by PM is the lowest. Under CBL and NBL classifications, PBLH retrieved by PM is the highest. PBLH retrieved by GMθ and GMRH is relatively low under all classifications. Moreover, the uncertainty analysis shows that the consistency of PBLH retrieved by different algorithms is more than 80 % under CBL and NBL classifications. By contrast, the consistency of PBLH is less than 60 % under SBL classification. The average profiles and standard deviations of wind speed and potential temperature under consistent and inconsistent conditions are also investigated. The results indicate that consistent cases are typically accompanied by evident atmospheric stratification, such as a large gradient in the potential temperature profile or a low-level jet in the wind speed profile. These results indicate that the reliability of the PBLH results retrieved from RS data is affected by the structure of the boundary layer. Overall, GMθ and RM are appropriate for CBL condition. GMθ and PM are recommended for NBL condition. GMθ and GMRH are robust for SBL condition. This comprehensive comparison provides a reference for selecting the appropriate algorithm when retrieving PBLH from RS data.

16 November 2019 in Journal of Geophysical Research: Atmospheres
Verified
Journal Article
Open access
PDF file
YMYingying Ma
Yingying Ma
MZMing Zhang
Ming Zhang
SJShikuan Jin
Shikuan Jin
WGWei Gong
Wei Gong
NCNan Chen
Nan Chen
YSYifan Shi
Yifan Shi
Decadal aerosol characteristics and related radiative effects (ARE) and efficiencies (AREE) at ultraviolet (UV), visible (VIS), near‐infrared (NIR), and shortwave wavelengths were investigated in Wuhan during winter haze periods based on observations from 2007 to 2016. Aerosols changed significantly under haze conditions; the average aerosol optical depth increased from 0.46 to 0.93, and the Ångström exponent increased from 1.12 to 1.23. Fine‐mode particles became dominant, and their peak radius also increased due to hygroscopic growth. The mean value of the UV single‐scattering albedo increased from 0.846 to 0.873, revealing the emergence of numerous fine‐mode, nonabsorbing aerosols. Backward trajectories suggested that local aerosols were partially affected by transported dust from Northwest China, especially in 2015. The interannual variation of the mean AREE at the top of atmosphere showed a gradually increasing tendency, revealing the enhanced potential cooling capacity of aerosols to the Earth‐atmosphere system over Wuhan. The increase in the AREE fraction at UV and VIS wavelengths, and its decrease at NIR wavelengths, indicated that this phenomenon was due to the increased proportion of fine‐mode scattering components in aerosols. The variation in AREE at top of atmosphere depended mainly on the single‐scattering albedo, while the same variation at the surface depended more on particle sizes. A detailed investigation of aerosols during haze periods can help us to further understand localized climate variations and haze‐inducing mechanisms.

24 November 2021 in Atmospheric Chemistry and Physics
Verified
Journal Article
Open access
PDF file
YMYingying Ma
Yingying Ma
YZYang Zhu
Yang Zhu
Liu BomingLiu Boming
Liu Boming
HLHui Li
Hui Li
SJShikuan Jin
Shikuan Jin
Wei GongWei Gong
Wei Gong
The vertical distribution of aerosol extinction coefficient (EC) measured by lidar systems has been used to retrieve the profile of particle matter with a diameter <2.5 µm (PM2.5). However, the traditional linear model (LM) cannot consider the influence of multiple meteorological variables sufficiently and then induce the low inversion accuracy. Generally, the machine learning (ML) algorithms can input multiple features which may provide us with a new way to solve this constraint. In this study, the surface aerosol EC and meteorological data from January 2014 to December 2017 were used to explore the conversion of aerosol EC to PM2.5 concentrations. Four ML algorithms were used to train the PM2.5 prediction models: random forest (RF), K-nearest neighbor (KNN), support vector machine (SVM) and extreme gradient boosting decision tree (XGB). The mean absolute error (root mean square error) of LM, RF, KNN, SVM and XGB models were 11.66 (15.68), 5.35 (7.96), 7.95 (11.54), 6.96 (11.18) and 5.62 (8.27) µg/m3, respectively. This result shows that the RF model is the most suitable model for PM2.5 inversions from EC and meteorological data. Moreover, the sensitivity analysis of model input parameters was also conducted. All these results further indicated that it is necessary to consider the effect of meteorological variables when using EC to retrieve PM2.5 concentrations. Finally, the diurnal and seasonal variations of transport flux (TF) and PM2.5 profiles were analyzed based on the lidar data. The large PM2.5 concentration occurred at approximately 13:00–17:00 local time (LT) in 0.2–0.8 km. The diurnal variations of the TF show a clear conveyor belt at approximately 12:00–18:00 LT in 0.5–0.8 km. The results indicated that air pollutant transport over Wuhan mainly occurs at approximately 12:00–18:00 LT in 0.5–0.8 km. The TF near the ground usually has the highest value in winter (0.26 mg/m2 s), followed by the autumn and summer (0.2 and 0.19 mg/m2 s, respectively), and the lowest value in spring (0.14 mg/m2 s). These findings give us important information on the atmospheric profile and provide us sufficient confidence to apply lidar in the study of air quality monitoring.

24 July 2023 in Atmospheric Chemistry and Physics
Verified
Journal Article
Open access
PDF file
SJShikuan Jin
Shikuan Jin
Yingying MaYingying Ma
Yingying Ma
ZHZhongwei Huang
Zhongwei Huang
Jianping HuangJianping Huang
Jianping Huang
WGWei Gong
Wei Gong
HLHui Li
Hui Li
Changes in aerosol loadings and properties are important for the understanding of atmospheric environment and climate change. This study investigates the characteristics and long-term trends of aerosols of different sizes and types in Asia from 2000 to 2020 by considering multi-source aerosol data and novel analysis methods and perspectives, all of which provides the groundwork for promoting the acquisition of new discoveries that are different from the past. The geometric mean aggregation method is applied, and serial autocorrelation is considered to avoid the overestimation of trend significance. Among regions in Asia, high values of aerosol optical depth (AOD) are mainly concentrated in East Asia (EA) and South Asia (SA) and are closely related to the population density. The AOD in EA showed the most significant negative trend, with a value of -5.28×10-4 per year, mainly owing to decreases in organic carbon (OC), black carbon (BC), and dust aerosols. It is also worth noting that this observed large-scale decrease in OC and BC is a unique and significant phenomenon to region of EA and mainly around China. In contrast, the aerosol concentrations in SA generally show a positive trend, with an increased value of AOD of 1.25 × 10−3 per year. This increase is mainly due to large emissions of fine-mode aerosols, such as OC and sulfate aerosol. Additionally, the high aerosol loading in northern SA has a lower AOD variability when compared with that of East China Plain, revealing a relatively more persistent air pollution situation. Over the whole region of Asia, the characteristics of the percentage changes in different types of AOD are seen in the increases in BC (6.23 %) and OC (17.09 %) AOD, together with a decrease in dust (−5.51 %), sulfate (−3.07 %), and sea salt (−9.80 %) AOD. Except for anthropogenic emissions, the large increase in the percentage of OC is also due to wildfires found in northern Asia in the summer, whereas the differently sized AOD only shows slight changes in Asia in that small-sized AOD decreases (−3.34 %) and that the total AOD did not show a significant change. This suggests that, from a trend perspective, decreases in aerosol in recent years have mostly been offsetting earlier increases in the anthropogenic emissions over Asia. To summarize, the above findings analyse the comprehensive characteristics of aerosol distributions and reappraise the long-term trends of different aerosol parameters, which will greatly enhance the understanding of regional and global aerosol environment and climatology, in addition to filling the gaps and breaking through the limitations of past knowledge.