Elephant foot yam (EFY) includes a high degree of nutritious fiber, carbohydrates, glucose, protein, and sugars. It also has plenty of calcium, sodium, potassium, and vitamin C, and is a promising source of starch. Due to the presence of oxalate and acridity, EFY has been extensively underused. Researchers have employed a variety of ways to decrease calcium oxalate, including boiling and NaCl treatment. A novel technique like ultrasound is a promising technique for the reduction of antinutritional factors effectively by keeping the natural phytoconstituents in it. The reduction of antinutritional factors by ultrasonication resulted from the high temperatures and pressures generated amid the collapse phase of cavitation bubbles. Microwave heating depends on the dielectric properties of the food. The dielectric constant is the ability to absorb the energy, and dielectric loss is the ability to reflect where it is dissipated as heat. Because of its heat‐labile nature and the formation of insoluble complexes, microwave treatment reduces the antinutrient component. This review focused on several studies on yam oxalate concentrations that were conducted using various treatments. This would help researchers and the food industry find more effective strategies to reduce the antinutritional factor using frequency‐controlled power ultrasound.
6 December 2023 in Materials Chemistry and Physics
A room-temperature-operated CO2 gas sensor based on YCeO nanocomposite was effectively prepared by the simple hydrothermal technique to detect low traces of CO2 (50–250 ppm). The YCeO granular morphological features were observed using field-emission scanning electron microscopy, which confirmed successful fabrication of nanocomposite of Y2O3 and CeO2. X-ray diffraction of YCeO showed the Cubic structure of space group Fm3m having density 6.74 gmcm−3. Rietveld refinement was performed for the analysis of complete crystal structural property. Surface porosity and specific surface area were observed by Brunnauer-Emmet Teller analysis. Optical properties were observed using UV-Visible spectroscopy. The band gap, optical conductivity, and refractive index calculated were 3.44 eV, 2.63 × 106, and 0.1164, respectively. Fourier transform infrared spectroscopy was done to analyze the functional and elastic properties of as-prepared nanomaterial. The highest sensor response recorded was 2.14. The response and recovery time at 50 ppm observed were 75.6 and 107.3 s, respectively. The YCeO chemo-resistive sensor confirmed long-term stability and selectivity to CO2 as compared to other gases viz. LPG, NH3, CH4, H2S, NO2 and H2. The relative humidity exposure was also performed at 15, 55 and 95% RH, in which it was confirmed that the sensor would give best response at mid humidity level i.e. 55 %RH. Sensing characteristics curve of YCeO nanocomposite at different temperature (30 °C–90 °C) at 50 ppm confirmed that YCeO sensor performed excellent at room temperature. This report unlocks an innovative opening for the fabrication of sensing devices that are room-temperature-operatable, highly sensitive and selective for quick detection of CO2 gas for its commercialization.
A eco-friendly, cost-effective, sustainable and green approach was used for the fabrication of silver nanoparticles by using a leaf extract of Blumea lacera (Ag@BLE). Silver nanoparticles sized 9–13 nm were characterized by different analytical techniques. The analytical methods utilized were powder X-ray diffraction (PXRD), Fourier transform-infrared (FT-IR) and transmission electron microscopy (TEM). The initial synthesis of Ag@BLE nanoparticles was confirmed by UV–visible spectrophotometry and at 429 nm there appeared a sharp surface plasmonic resonance (SPR) band. Organic dye methylene blue (MB) is one of the most abundant pollutants in the water environment. In the presence of catalyst Ag@BLE, the absorbance intensity of cationic MB dye was reduced dramatically by sodium borohydride (NaBH4). Methylene blue’s catalytic dye degradation was tested to determine the effectiveness and function of synthesized Ag@BLE, and the reduction rates were found to be 0.01455 min−1 (0 mg Ag@BLE, 21 min) and 0.03144 min−1 (20 mg Ag@BLE, 24 min). Synthesized Ag@BLE showed rapid and excellent catalytic reduction of MB dye, and it followed pseudo first order kinetics.
In this study, YCeO nanocomposites were efficaciously synthesized by the hydrothermal method in the company of sodium hydroxide as a reducing agent as well as cerium nitrate and yttrium nitrate as precursors. Synthesis temperature and pressure, during hydrothermal reactions, show a critical role in governing the shape, size, oxygen vacancy attentiveness, and low-temperature reducibility in CeO2-based nanocomposites. The lattice constants of the yttrium ceria nanocomposite also are contingent upon the attentiveness of hydroxide ions which primes better morphology at low temperature and pressure. The X-Ray Diffraction (XRD) pattern of YCeO shows the cubic structure of space group Fm3m, having a density of 6.74 gm cm−3, volume of 157.81 × 106 pm3, crystallite size of 18.66 nm, and lattice strain of 0.0041, and many more structural parameters were calculated. Field Emission-Scanning Electron Microscopy (FE-SEM) and Atomic Force Microscopy (AFM) studies show the granular structure and surface roughness. Surface porosity and specific surface area were observed by Brunauer–Emmett–Teller (BET), average nanoparticle size was analyzed by the analyzer, and optical properties were observed by Fourier Transform Infrared Spectroscopy (FTIR) and UV-Visible spectroscopy in which the presence of functional and carboxyl group were analysed by FTIR and absorption wavelength 256.58 nm and band gap 3.27 eV were analysed by UV-Visible spectroscopy, lastly thermal stability of this nanoparticle was analyzed by Thermo-Gravimetric Analysis (TGA).