Pradeep Kumar Pandey

Mr. Pradeep Kumar Pandey

Department of Chemistry, University of Lucknow, Lucknow, India
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 May 2023 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
PPPradeep Kumar Pandey
Pradeep Kumar Pandey
JSJoy Sarkar
Joy Sarkar
Shivangi SrivastavaShivangi Srivastava
Shivangi Srivastava
A eco-friendly, cost-effective, sustainable and green approach was used for the fabrication of silver nanoparticles by using a leaf extract of Blumea lacera (Ag@BLE). Silver nanoparticles sized 9–13 nm were characterized by different analytical techniques. The analytical methods utilized were powder X-ray diffraction (PXRD), Fourier transform-infrared (FT-IR) and transmission electron microscopy (TEM). The initial synthesis of Ag@BLE nanoparticles was confirmed by UV–visible spectrophotometry and at 429 nm there appeared a sharp surface plasmonic resonance (SPR) band. Organic dye methylene blue (MB) is one of the most abundant pollutants in the water environment. In the presence of catalyst Ag@BLE, the absorbance intensity of cationic MB dye was reduced dramatically by sodium borohydride (NaBH4). Methylene blue’s catalytic dye degradation was tested to determine the effectiveness and function of synthesized Ag@BLE, and the reduction rates were found to be 0.01455 min−1 (0 mg Ag@BLE, 21 min) and 0.03144 min−1 (20 mg Ag@BLE, 24 min). Synthesized Ag@BLE showed rapid and excellent catalytic reduction of MB dye, and it followed pseudo first order kinetics.

15 November 2023 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
Shivangi SrivastavaShivangi Srivastava
Shivangi Srivastava
NPNarendra Kumar Pandy
Narendra Kumar Pandy
VVvernica verma
vernica verma
PERAMJEET SINGHPERAMJEET SINGH
PERAMJEET SINGH
AVAmit Verma
Amit Verma
JSJoy Sarkar
Joy Sarkar
The hydrothermal method was successfully used in the current work to fabricate YCeO nanocomposites, a novel hydrogen (H2) gas sensor. XRD, FE-SEM, and AFM were performed to determine the crystal structure and morphology of as prepared nanocomposite. The cubic structure of space group Fm3m with a density of 6.74 gmcm−3, a volume of 157.81 106 pm3, and a crystallite size of 18.66 nm is obtained in the XRD pattern of YCeO in this instance. Furthermore, the granular structure and roughness of the surface can be seen in FE-SEM and AFM studies. Additionally, hydrogen sensing was performed at a temperature of 28 °C with a hydrogen concentration of 20–120 ppm. The sensor response for hydrogen gas at 20 and 120 ppm was measured to be 1.41 and 2.09, respectively. At 20 ppm, we came to know that the recovery times and rapid response were 75.54 s and 40.81 s, respectively. The long-term stability was also checked for 40 days and the change in sensor response at 20 and 40 days was 1.40 and 1.39, respectively. The investigated sensor device also demonstrates the benefits of a straightforward fabrication procedure, a basic structure, and a very affordable hydrogen detection sensor.

17 May 2023 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
Shivangi SrivastavaShivangi Srivastava
Shivangi Srivastava
NPNarendra Kumar Pandey
Narendra Kumar Pandey
PPPradeep Kumar Pandey
Pradeep Kumar Pandey
Cerium oxide nanoparticles (CeNPs) are used in chemical mechanical polishing/planarization, corrosion protection, solar cells, fuel oxidation catalysis, automotive exhaust treatment, and sensing. However, their synthesis process increases the likelihood of exposure, potential health effects, and ecological implications. Consequently, it is important to synthesize CeNPs in an environmentally friendly and affordable way to create a better structure. This work discusses the numerous structural properties of CeNPs and is solely concerned with their economical hydrothermal production. To comprehend the shape, FE-SEM was used, which shows the granular-like structure. The elastic characteristics of the material, like Bulk Modulus, was 177 GPa, Sher Modulus was 78 GPa, Poisson’s ratio was 0.32, and some other properties were also determined by using the FTIR spectrum, which also revealed numerous functional groups. The CeO2 XRD pattern reveals a cubic structure of the space group Fm3m with a density of 6.74 gmcm−3, a volume of 158.08 × 106 pm3, a crystallite size of 18.66 nm, a lattice strain of 0.0041, and many other estimated structural characteristics. Rietveld refinement was also performed for the refined parameters that suggest the high quality of structural parameters like R-factors, wR-factor (Rw), and Chi-squared (χ2) and for designing the crystal structure of cerium oxide nanoparticles. When examining the composition and nature of bonding materials, the structural features are of the utmost significance, as they offer a variety of information regarding the subject material’s general qualities. Excellent characteristics of nanomaterials include high chemical and physical stability, low density, and a big surface area. Nanomaterials are preferred options for the creation of brand-new, functioning membranes because of their superior qualities.