Shuyi Mi

Dr. Shuyi Mi

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 December 2020 in Optics Letters
Verified
Journal Article
Closed access
GLGaoyou Liu
Gaoyou Liu
SMShuyi Mi
Shuyi Mi
KYKe Yang
Ke Yang
DWDisheng Wei
Disheng Wei
JLJunhui Li
Junhui Li
YJYoulun Ju
Youlun Ju
We demonstrated a high-power Q -switched two-stage Ho:YAG master-oscillator power-amplifier (MOPA) system dual-end pumped by Tm:YLF lasers. A new method was introduced by rotating and swapping spatial axial directions of pump beams to improve the beam quality of the Ho:YAG oscillator and first-stage amplifier. Two parallel second-stage Ho:YAG amplifiers were employed to output high power. A total maximum average output power of 332 W at 2091 nm with pulse repetition frequency of 20 kHz was achieved. Then a Z n G e P 2 MOPA system was demonstrated using the Ho:YAG MOPA as the pump source. A maximum average output power of 161 W at 3–5 µm was obtained with 290 W incident Ho pump power, corresponding to beam quality factors M 2 of 3.42 and 3.83 for horizontal and vertical directions, respectively.

5 December 2023 in Nature Communications
Verified
Journal Article
Open access
PDF file
BZBin Zhao
Bin Zhao
XSXuetong Shi
Xuetong Shi
SKSergei Khakalo
Sergei Khakalo
YMYang Meng
Yang Meng
AMArttu Miettinen
Arttu Miettinen
BMBruno Mattos
Bruno Mattos
Light is a powerful and sustainable resource, but it can be detrimental to the performance and longevity of optical devices. Materials with near-zero light reflectance, i.e. superblack materials, are sought to improve the performance of several light-centered technologies. Here we report a simple top-down strategy, guided by computational methods, to develop robust superblack materials following metal-free wood delignification and carbonization (1500 °C). Subwavelength severed cells evolve under shrinkage stresses, yielding vertically aligned carbon microfiber arrays with a thickness of ~100 µm and light reflectance as low as 0.36% and independent of the incidence angle. The formation of such structures is rationalized based on delignification method, lignin content, carbonization temperature and wood density. Moreover, our measurements indicate a laser beam reflectivity lower than commercial light stoppers in current use. Overall, the wood-based superblack material is introduced as a mechanically robust surrogate for microfabricated carbon nanotube arrays.

19 October 2020 in Optics Express
Verified
Journal Article
Open access
CYChao Yang
Chao Yang
BYBaoquan Yao
Baoquan Yao
YCYi Chen
Yi Chen
Gaoyou LiuGaoyou Liu
Gaoyou Liu
SMShuyi Mi
Shuyi Mi
Xiaoming DuanXiaoming Duan
Xiaoming Duan
In this paper, we demonstrate a 570.0 MHz harmonically mode-locked all-polarization-maintaining Ho-doped fiber laser based on semiconductor saturable absorbed mirror. Firstly, the laser operates in the 15.4 MHz fundamental mode-locked soliton regime, emitting 2051.5 nm, 1.62 ps soliton pulse without Kelly sidebands. And then, the stable 37th-order harmonic mode-locked soliton with maximum repetition rate up to 570.0 MHz at 2053nm is generated. Moreover, colorful soliton rain behaviors are also discussed.

31 May 2022 in Optics Express
Verified
Journal Article
Open access
SMShuyi Mi
Shuyi Mi
JTJinwen Tang
Jinwen Tang
DWDisheng Wei
Disheng Wei
BYBaoquan Yao
Baoquan Yao
JLJunhui Li
Junhui Li
Xiaoming DuanXiaoming Duan
Xiaoming Duan
We demonstrated an efficient, high-power Ho:YAG master-oscillator power amplifier (MOPA) system and investigated its thermal-birefringence-induced depolarization. The maximum output power was 450 W with a depolarized power of 32.1 W and depolarization of 0.071 via three power amplifiers. To our knowledge, this is the highest average power generated from a Ho:YAG MOPA system. In theory, a simplified model was built to calculate the depolarization in the amplifier, and the theoretical results agreed with the actual value well. Moreover, the overall optical-to-optical efficiency of the MOPA system was near 60%, and the beam quality M2 factors of s-polarized laser were measured to be ∼ 1.8 at 400 W. In pulse operation, the per pulse energy was ∼ 11 mJ at the pulse repetition frequency of 40 kHz with the corresponding peak power of 220 kW.

13 April 2020 in Optics Letters
Verified
Journal Article
Closed access
GLGao-You Liu
Gao-You Liu
YCYi Chen
Yi Chen
BYBao-Quan Yao
Bao-Quan Yao
RWRui-Xue Wang
Rui-Xue Wang
KYKe Yang
Ke Yang
Xiaoming DuanXiaoming Duan
Xiaoming Duan
We demonstrated a high-power long-wave infrared optical parametric oscillator at 9.8 µm based on a type-I phase-matching Z n G e P 2 crystal. By using a Q -switched 2091 nm Ho:YAG laser with pulse repetition frequency of 10 kHz as the pump source, the maximum average output power of 3.51 W at 9.8 µm was achieved with incident pump power of 90 W, corresponding to a slope efficiency of 4.81% and conversion efficiency at maximum pump power of 3.9%. The pulse width of 19.6 ns and linewidth of 142 nm were obtained at maximum output level. In addition, the beam quality factor M 2 was measured to be ∼ 2.2 .

1 July 2020 in Optics Letters
Verified
Journal Article
Closed access
PDF file
GLGaoyou Liu
Gaoyou Liu
YCYi Chen
Yi Chen
ZLZhuang Li
Zhuang Li
KYKe Yang
Ke Yang
BYBaoquan Yao
Baoquan Yao
Xiaoming DuanXiaoming Duan
Xiaoming Duan
We firstly demonstrated a tunable 2.1 µm pumped mid-infrared type-II phase-matching B a G a 4 S e 7 (BGSe) optical parametric oscillator (OPO). A signal tuning range of 3.82–3.99 µm was achieved. With a signal light produced by the BGSe OPO serving as seed, the Z n G e P 2 (ZGP) optical parametric amplifier (OPA) was first introduced. A 4.35 W mid-infrared laser was obtained in the novel type-II BGSe OPO with a ZGP OPA system, which was pumped by a 24 W 1 kHz Q -switched Ho:YAG laser. The beam quality factor M 2 of the whole system is ∼ 2.3 , which is over a 50% promotion on the previous M 2 results of single BGSe OPO.