Recent uses of titanium dioxide (TiO2) have involved various applications which include the food industry. This study aims to develop TiO2nanoparticle-coated film for potential food packaging applications due to the photocatalytic antimicrobial property of TiO2. The TiO2nanoparticles with varying concentrations (0–0.11 g/ 100 mL organic solvent) were coated on food packaging film, particularly low density polyethylene (LDPE) film. The antimicrobial activity of the films was investigated by their capability to inactivateEscherichia coli(E. coli) in an actual food packaging application test under various conditions, including types of light (fluorescent and ultraviolet (UV)) and the length of time the film was exposed to light (one–three days). The antimicrobial activity of the TiO2nanoparticle-coated films exposed under both types of lighting was found to increase with an increase in the TiO2nanoparticle concentration and the light exposure time. It was also found that the antimicrobial activity of the films exposed under UV light was higher than that under fluorescent light. The developed film has the potential to be used as a food packaging film that can extend the shelf life, maintain the quality, and assure the safety of food.
To produce titanium dioxide (TiO2) nanoparticle coatings, it is desirable that the nanoparticles are dispersed into a liquid solution and remain stable for a certain period of time. Controlling the dispersion and aggregation of the nanoparticles is crucial to exploit the advantages of the nanometer‐sized TiO2 particles. In this work, TiO2 nanoparticles were dispersed and stabilized in aqueous suspensions using two common dispersants which were polyacrylic acid (PAA) and ammonium polymethacrylate (Darvan C). The effect of parameters such as ultrasonication amplitude and type and amount of dispersants on the dispersibility and stability of the TiO2 aqueous suspensions were examined. Rupture followed by erosion was determined to be the main break up mechanisms when ultrasonication was employed. The addition of dispersant was found to produce more dispersed and more stabilized aqueous suspension. 3 wt.% of PAA with average molecular weight (Mw) of 2000 g/mol (PAA 2000) was determined to produce the best and most stable dispersion. The suspensions were then coated on quartz glass, whereby the photocatalytic activity of the coatings was studied via the degradation of formaldehyde gas under UV light. The coatings were demonstrated to be photocatalytically active.
This research investigated the effect of synthesis temperature on the size and shape of zinc oxide (ZnO) nanoparticles (NPs) synthesized using pineapple peel waste and antibacterial activity of ZnO NPs in starch films. Zinc oxide NPs synthesized at different temperatures were characterized by Fourier transform infrared spectroscopy, X-ray diffraction analysis, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy. Micrographs of ZnO NPs synthesized at 28 and 60 °C showed that synthesis temperature affected the sizes and shapes of ZnO NPs. The non-heated (28 °C) condition resulted in NPs with diameters in the range of 8–45 nm with a mixture of spherical and rod shapes, whereas the heated (60 °C) condition led to NPs with diameters in the range of 73–123 nm with flower rod shapes. The ZnO–starch nanocomposite films incorporated with 1, 3, and 5 wt.% ZnO NPs were prepared via a film casting method. The antibacterial activity of the films against Gram-positive and Gram-negative bacteria was investigated using the disc diffusion method. The results showed an increase in the inhibition zone for Gram-positive bacteria, particularly Bacillus subtilis, when the concentration of ZnO NPs incorporated in the film was increased from 1 to 5 wt.%.
The water sorption and permeability properties of edible film produced from potato peel waste was investigated under different levels of relative humidity (23, 33, 43, 57, 75% RH) and temperatures (5, 30, 50 °C). The water sorption behaviour and isotherms of the film were investigated by fitting water sorption data to the Peleg model and the Guggenheim, Anderson de Boer model (GAB model). The amount of moisture content, time required for the moisture content of the film to reach equilibrium, water sorption rate, and water sorption capacity increased when the relative humidity increased. The effect of temperature on moisture content, water sorption rate, water sorption capacity, and monolayer moisture content is complex and related to the water activity as well as the moisture content. Based on R2 and RMSE values, the Peleg and GAB models were respectively determined as excellent models to predict the water sorption properties of the films, thus supporting the reliability of water sorption behaviour prediction. The water vapour transmission rate and water vapour permeability increased with an increase in relative humidity and temperature. The sorption and permeability properties of the film are worth investigation since the final application of the film as food packaging is ultimately dependent on these behaviours.
This work is directed towards developing biodegradable films from biopolymer that is sustainable and environmentally friendly particularly tapioca starch (TPS) films. However, the usage of TPS films for food packaging application has been limited due to the poor mechanical, barrier and thermal properties. Microcrystalline cellulose (MCC) at different concentrations (0 to 10 wt.%) was incorporated as the filler into the films to form TPS/MCC composite films via solvent casting method in order to improve the limited properties of the films. The TPS/MCC films were characterized in terms of physical, mechanical, barrier, and thermal properties. It was found that 3 wt.% MCC was the ideal concentration of filler that resulted to the highest performance of the films in terms of mechanical and barrier properties. Thermal properties of the films were also improved with the addition of MCC into the films. In conclusion, TPS/MCC films produced in this study exhibit improved properties and have the potential to be used for food packaging application.