Collective heating systems have multiple end-users with time-varying, often different temperature demands. There are several concepts catering to this, e.g., multi-pipe networks and 2-pipe networks with or without decentralised booster systems. In this study, we focus on 2-pipe networks with a changing supply temperature by smart use of decentralised storage. By grouping high-temperature demands, the average supply temperature can be lowered during large parts of the day, which is beneficial for system efficiency. The actual energy-saving potential, however, can be case-specific and is expected to depend on design choices and implemented control strategies. In this paper, these dependencies are assessed and identified by implementing two optimised rule-based control strategies, providing in such a way a bench-mark for other control strategies. The results show that grouping yields energy savings of up to 36% at similar peak demand as with conventional control strategies. The energy-saving potential is greatest for large storage volumes and small networks, but large networks with large storage and proper control choices can also achieve around 30% energy savings. Moreover, high-temperature time can easily be reduced to less than 40% of the day, which could make space cooling without decentralised booster heat pumps possible, but this requires further research.
Heating networks are typically controlled by a heating curve, which depends on the outdoor temperature. Currently, innovative heating networks connected to low heat demand dwellings ask for advanced control strategies. Therefore, the potentials of reinforcement learning are researched in a heating network connected to a central heat pump and four dwellings. The comparison between a discrete and continuous action space is made with respect to the weight factor of the reward function. The results indicate that in both cases the reinforcement learning-based controlling of the supply temperature can generally ensure energy savings while keeping the occupant's temperature requirements in comparison to the rule-based controller.
Large-scale hot-water underground tank and pit thermal energy storages have a high potential to massively increase the proportion of renewable energy in future local and district energy systems. To fully exploit the potential of these large-scale thermal energy storage (LTES) technologies, comprehensive planning and tuning of the overall system by dynamic system simulations is necessary. Modelica-based simulation tools show many advantages over other established system simulation tools. However, suitable LTES models in Modelica are limited or lack essential features. Consequently, it is the intention of this study to develop a novel Modelica LTES model. Existing models served as the basis for the development. A validation case study involving a real Danish pit storage was performed to assess the accuracy of the new model under real conditions. The results show that the new model adequately represents the physical behavior and interaction with the surrounding soil. This study is a first step towards more efficient modeling and simulation of LTES in dynamic system simulations in the future.