The current interest in thermal energy storage is connected with increasing the efficiency of conventional fuel-dependent systems by storing the waste heat in low consumption periods, as well as with harvesting renewable energy sources with intermittent character. Many of the studies are directed towards compact solutions requiring less space than the commonly used hot water tanks. This is especially important for small capacity thermal systems in buildings, in family houses or small communities. There are many examples of thermal energy storage (TES) in the literature using the latent heat of phase change, but only a few are commercially available. There are no distinct generally accepted requirements for such TES systems. The present work fills that gap on the basis of the state of the art in the field. It reviews the most prospective designs among the available compact latent heat storage (LHS) systems in residential applications for hot water, heating and cooling and the methods for their investigation and optimization. It indicates the important characteristics of the most cost- and energy-efficient compact design of an LHS for waste heat utilization. The proper design provides the chosen targets at a reasonable cost, with a high heat transfer rate and effective insulation. It allows connection to multiple heat sources, coupling with a heat pump and integration into existing technologies and expected future scenarios for residential heating and cooling. Compact shell-tube type is distinguished for its advantages and commercial application.
There are many technologies for removal of sulfur dioxide (SO2) from flue gases. They are intrinsic part of the efforts for sustainability of energy production as they reduce the harmful impact of fossil fuel combustion on the environment by minimizing one of the main air pollutants. A wide range of methods use alkaline absorbents. In most cases, the products obtained from the absorption process have to undergo further oxidation, which increases the cost of carrying out the process. As a final result, the sulfates obtained (Na2SO4 and CaSO4) have limited practical application and there is a problem with their disposal. Scientific and engineering efforts have been directed towards the development of a practically waste-free technology for gas purification from SO2. An absorption–adsorption method is proposed, which comprises absorption of SO2 in water with simultaneous adsorption of the resultant sulfurous acid (H2SO3) from the aqueous solution with a synthetic anion-exchange resin. Regeneration of the adsorbent is accomplished with a dilute solution of ammonia (NH3), followed by decomposition of the resulting ammonium sulfite ((NH4)2SO3) with nitric acid (HNO3). The products of the processes are pure gaseous (liquefied) SO2 and an aqueous solution of ammonium nitrate (NH4NO3). Sulfur dioxide has a wide range of applications in the chemical industry; ammonium nitrate is a product with a variety of commercial uses as well, the most common of which is as a soil fertilizer. The new absorption–adsorption method offers a practically waste-free technology. The basic unit of this technology is a bubble-cap tray column where the absorption–adsorption process is carried out in an aqueous suspension of a synthetic anion-exchange resin. This work presents a CFD simulation of the flow on the bubble-cap tray. A physical model of the column is constructed, which contains a bubble-cap tray fabricated by 3D printing. As a result of this experimental study, new data on the tray pressure drop, gas holdup, and the kinetics of the absorption–adsorption process were obtained.
8 Modeling and assessment of the transfer effectiveness in integrated bioreactor with membrane separation was published in Theoretical and Computational Chemistry on page 227.