Aleksandar Georgiev Georgiev

Prof. Dr. Aleksandar Georgiev Georgiev

Technical University of Sofia, Sofia, Sofia-Grad, Bulgaria

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 December 2017 in Energies
Verified
Journal Article
Open access
PDF file
AVAna Vieira
Ana Vieira
MPMaria Alberdi Pagola
Maria Alberdi Pagola
Paul ChristodoulidesPaul Christodoulides
Paul Christodoulides
Saqib JavedSaqib Javed
Saqib Javed
FLFleur Loveridge
Fleur Loveridge
GRGeorgia Radioti
Georgia Radioti
Increasing use of the ground as a thermal reservoir is expected in the near future. Shallow geothermal energy (SGE) systems have proved to be sustainable alternative solutions for buildings and infrastructure conditioning in many areas across the globe in the past decades. Recently novel solutions, including energy geostructures, where SGE systems are coupled with foundation heat exchangers, have also been developed. The performance of these systems is dependent on a series of factors, among which the thermal properties of the soil play a major role. The purpose of this paper is to present, in an integrated manner, the main methods and procedures to assess ground thermal properties for SGE systems and to carry out a critical review of the methods. In particular, laboratory testing through either steady-state or transient methods are discussed and a new synthesis comparing results for different techniques is presented. In situ testing including all variations of the thermal response test is presented in detail, including a first comparison between new and traditional approaches. The issue of different scales between laboratory and in situ measurements is then analysed in detail. Finally, the thermo-hydro-mechanical behaviour of soil is introduced and discussed. These coupled processes are important for confirming the structural integrity of energy geostructures, but routine methods for parameter determination are still lacking.

18 August 2020 in Energies
Verified
Journal Article
Open access
PDF file
Paul ChristodoulidesPaul Christodoulides
Paul Christodoulides
AVAna Vieira
Ana Vieira
Stanislav LenartStanislav Lenart
Stanislav Lenart
JMJoão Maranha
João Maranha
GVGregor Vidmar
Gregor Vidmar
GFGeorgios Florides
Georgios Florides
Shallow geothermal energy systems (SGES) may take different forms and have recently taken considerable attention due to energy geo-structures (EGS) resulting from the integration of heat exchange elements in geotechnical structures. Still, there is a lack of systematic design guidelines of SGES. Hence, in order to contribute towards that direction, the current study aims at reviewing the available SGES modeling options along with their various aspects and practices. This is done by first presenting the main analytical and numerical models and methods related to the thermal behavior of SGES. Then, the most important supplementary factors affecting such modeling are discussed. These include: (i) the boundary conditions, in the form of temperature variation or heat flow, that majorly affect the predicted thermal behavior of SGES; (ii) the spatial dimensions that may be crucial when relaxing the infinite length assumption for short heat exchangers such as energy piles (EP); (iii) the determination of SGES parameters that may need employing specific techniques to overcome practical difficulties; (iv) a short-term vs. long-term analysis depending on the thermal storage characteristics of GHE of different sizes; (v) the influence of groundwater that can have a moderating effect on fluid temperatures in both heating and cooling modes. Subsequently, thermo-mechanical interactions modeling issues are addressed that may be crucial in EGS that exhibit a dual functioning of heat exchangers and structural elements. Finally, a quite lengthy overview of the main software tools related to thermal and thermo-hydro-mechanical analysis of SGES that may be useful for practical applications is given. A unified software package incorporating all related features of all SGES may be a future aim.

1 April 2021 in Energy
Verified
Journal Article
Closed access
Iliya Krastev IlievIliya Krastev Iliev
Iliya Krastev Iliev
ATA.K. Terziev
A.K. Terziev
HBH.I. Beloev
H.I. Beloev
INI. Nikolaev
I. Nikolaev
AGAleksandar Georgiev Georgiev
Aleksandar Georgiev Georgiev

10 March 2023 in Processes
Verified
Journal Article
Open access
PDF file
GDGülşah Karaca Dolgun
Gülşah Karaca Dolgun
MKMeltem Koşan
Meltem Koşan
MKMuhammet Kayfeci
Muhammet Kayfeci
AGAleksandar Georgiev Georgiev
Aleksandar Georgiev Georgiev
Ali KeçebaşAli Keçebaş
Ali Keçebaş
The global climate crisis has led society toward cleaner energy sources. Another reason is the limited reserves of fossil energy resources. Efforts to increase the efficiency of photovoltaic modules (PVs) have gained momentum. The high temperature is the biggest factor causing a decrease in the efficiency of PVs. In this study, a commercial PV was cooled with distilled water, a multiwalled carbon nanotubes (MWCNT)/water mixture, and a graphene nanoplatelets (GNP)/water mixture. The environmental impact of electricity, total energetic efficiency, energy payback time, energy return on investment, and embodied energy of the PV/thermal (PV/T) system were compared using life cycle assessment and cumulative energy demand. The electrical efficiency of the PV/T changed between 13.5% and 14.4%. The total efficiency of PV/T changed between 39.5% and 45.7%. The energy returns on investment were 1.76, 1.80, and 1.85 for PV/T-distilled water, the PV/T-MWCNT/water mixture, and the PV/T-GNP/water mixture, respectively. Moreover, the embodied energy evaluation values were 3975.88 MJ for PV/T-distilled water, 4081.06 MJ for the PV/T-MWCNT/water mixture, and 4077.86 MJ for the PV/T-GNP/water mixture. The main objective of this research was to study the energy and environmental performances of PVs cooled with different nanofluids and draw general conclusions about the applicability of these systems.

14 April 2023 in Energies
Verified
Journal Article
Open access
PDF file
ATAzim Doğuş Tuncer
Azim Doğuş Tuncer
Emine Yağız GürbüzEmine Yağız Gürbüz
Emine Yağız Gürbüz
Ali KeçebaşAli Keçebaş
Ali Keçebaş
AGAleksandar Georgiev Georgiev
Aleksandar Georgiev Georgiev
The objective of this study is to improve the performance of a hybrid photovoltaic/thermal (PV/T) air heater incorporating a thermal energy storage system (TESS) that uses paraffin and has metallic mesh layers. In the experimental part of the research, three different pilot-scale PV/Ts have been designed, manufactured, and experimentally investigated. The first system was structured as a conventional PV/T, while the second (PVT/TESS) was modified with a paraffin-based TESS. The efficiency of a hybrid PV/T air heater was improved by integrating a paraffin-based thermal energy storage system (TESS) with metallic mesh layers (PV/T-MTESS). The performance of the modified PV/T-MTESS system was compared to two other PV/T systems under the same weather conditions and air flow rate. The results of the experiment demonstrated that the integration of mesh layers into the TESS led to substantial improvements in the system’s thermal and electrical performance, as well as its overall exergy efficiency. The improvements were 33.17%, 14.82%, and 58.15%, respectively, when compared to the unaltered (conventional) PV/T setup. Moreover, an enviro-economic analysis has been performed on the developed and tested PV/Ts. Using TESS with only paraffin and with mesh layer-added paraffin reduced the payback time of the system by 2.54% and 9.85%, respectively. Moreover, the annual carbon dioxide saving was improved from 0.079 tons/year to 0.103 tons/year using a mesh layer-integrated TESS in the PV/T air heater.

5 November 2022 in Energies
Verified
Journal Article
Open access
PDF file
DDDaniela Dzhonova
Daniela Dzhonova
AGAleksandar Georgiev Georgiev
Aleksandar Georgiev Georgiev
SNSvetoslav Nakov
Svetoslav Nakov
Stela PanyovskaStela Panyovska
Stela Panyovska
TPTatyana Petrova
Tatyana Petrova
SMSubarna Maiti
Subarna Maiti
The current interest in thermal energy storage is connected with increasing the efficiency of conventional fuel-dependent systems by storing the waste heat in low consumption periods, as well as with harvesting renewable energy sources with intermittent character. Many of the studies are directed towards compact solutions requiring less space than the commonly used hot water tanks. This is especially important for small capacity thermal systems in buildings, in family houses or small communities. There are many examples of thermal energy storage (TES) in the literature using the latent heat of phase change, but only a few are commercially available. There are no distinct generally accepted requirements for such TES systems. The present work fills that gap on the basis of the state of the art in the field. It reviews the most prospective designs among the available compact latent heat storage (LHS) systems in residential applications for hot water, heating and cooling and the methods for their investigation and optimization. It indicates the important characteristics of the most cost- and energy-efficient compact design of an LHS for waste heat utilization. The proper design provides the chosen targets at a reasonable cost, with a high heat transfer rate and effective insulation. It allows connection to multiple heat sources, coupling with a heat pump and integration into existing technologies and expected future scenarios for residential heating and cooling. Compact shell-tube type is distinguished for its advantages and commercial application.