The development of fully electric and hybrid electric aircraft using fuel cells and batteries has lately received much attention since the technology can contribute to achieving an emission-free world. For hybridisation of fuel cells and batteries, the challenge of integrating different voltage sources to supply power to different loads at different voltage levels has to be met. Presently, this is achieved by using a combination of complex passive circuitry and DC–DC converters. In this paper, a new galvanically isolated DC–DC converter topology is proposed; it integrates a battery and fuel cells as input sources and supplies power to a high voltage (HV) and a low voltage (LV) load simultaneously. The converter enables power flow from the sources to the load, as well as between the sources and power flow back towards the battery during recuperation for recharging the battery during flight. The functionality of the converter design is verified using a real-time (RT) hardware-in-the-loop (HiL) test. The proposed concept is easily scalable and can be adopted in any fuel cell and battery drive train of all-electric flights of different sizes.
With the expansion of research in the field of more electric aircraft (MEA), demand for more efficient power-electronic converters is increasing. LLC converters are one of the most used typologies in terms of energy density and efficiency for both automotive and aerospace applications. However, especially in the case of aerospace application, a fault-tolerant topology is required. This paper presents a new LLC-based resonant converter with multiple re-configurable fault-tolerant architecture to address this issue. The proposed converter, with the help of a specially designed transformer and six extra semiconductor switches, can re-configure the converter in such a way that in the event of a catastrophic fault in one or more semiconductor switches, the converter can still maintain the nominal output voltage and current, so that the aircraft does not lose its critical functionality.
Efficient and robust power electronic converters are vital to the success of the electrification of aircraft. Especially, low voltage auxiliary converters, which usually supply high current and low voltage loads, are not readily available industrially and need special attention. In terms of energy density and efficiency, LLC converters are among the most commonly used and efficient topologies for automotive and aerospace applications. In the case of aerospace applications, a fault-tolerant topology is highly desirable to reduce the need for redundant components and weight by removing backup systems. To solve this issue, this study introduces a new 2.0 kW LLC-based converter with a reconfigurable fault-tolerant architecture. With the help of a specially designed secondary side, the proposed converter can reconfigure itself so that even if one of the semiconductor switches fails permanently, the converter can still maintain power at nominal voltage levels, ensuring that the aircraft’s vital functionality is preserved. This paper also describes the basic operation principle, component-design aspects, conduction loss reduction techniques, and control system algorithm. Finally, a 2.0 kW experimental prototype is built to verify and demonstrate the operation of the proposed reconfigurable LLC converter.