Syed Roshan Zamir Hashmi

Mr. Syed Roshan Zamir Hashmi

Department of Structural Engineering, National University of Sciences and Technology (NUST), Islamabad, Islāmābād, Pakistan
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 February 2022 in Diamond and Related Materials
Verified
Journal Article
Closed access
OZOsama Zaid
Osama Zaid
Syed Roshan Zamir HashmiSyed Roshan Zamir Hashmi
Syed Roshan Zamir Hashmi
FAFahid Aslam
Fahid Aslam
ZAZain Ul Abedin
Zain Ul Abedin
AUAsmat Ullah
Asmat Ullah

2 May 2023 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
OZOsama Zaid
Osama Zaid
Syed Roshan Zamir HashmiSyed Roshan Zamir Hashmi
Syed Roshan Zamir Hashmi
MOMohamed Hechmi El Ouni
Mohamed Hechmi El Ouni
RMRebeca Martínez-García
Rebeca Martínez-García
JPJesús de Prado-Gil
Jesús de Prado-Gil
SYSaif Eldeen A.S. Yousef
Saif Eldeen A.S. Yousef

14 November 2022 in Materials
Verified
Journal Article
Open access
PDF file
Syed Roshan Zamir HashmiSyed Roshan Zamir Hashmi
Syed Roshan Zamir Hashmi
MKMuhammad Imran Khan
Muhammad Imran Khan
Shabir Hussain KhahroShabir Hussain Khahro
Shabir Hussain Khahro
OZOsama Zaid
Osama Zaid
MSMuhammad Shahid Siddique
Muhammad Shahid Siddique
Nur Izzi Md YusoffNur Izzi Md Yusoff
Nur Izzi Md Yusoff
Carbon footprint reduction, recompense depletion of natural resources, as well as waste recycling are nowadays focused research directions to achieve sustainability without compromising the concrete strength parameters. Therefore, the purpose of the present study is to utilize different dosages of marble waste aggregates (MWA) and stone dust (SD) as a replacement for coarse and fine aggregate, respectively. The MWA with 10 to 30% coarse aggregate replacement and SD with 40 to 50% fine aggregate replacement were used to evaluate the physical properties (workability and absorption), durability (acid attack resistance), and strength properties (compressive, flexural, and tensile strength) of concrete. Moreover, statistical modeling was also performed using response surface methodology (RSM) to design the experiment, optimize the MWA and SD dosages, and finally validate the experimental results. Increasing MWA substitutions resulted in higher workability, lower absorption, and lower resistance to acid attack as compared with controlled concrete. However, reduced compressive strength, flexural strength, and tensile strength at 7-day and 28-day cured specimens were observed as compared to the controlled specimen. On the other hand, increasing SD content causes a reduction in workability, higher absorption, and lower resistance to acid attack compared with controlled concrete. Similarly, 7-day and 28-day compressive strength, flexural strength, and tensile strength of SD-substituted concrete showed improvement up to 50% replacement and a slight reduction at 60% replacement. However, the strength of SD substituted concrete is higher than controlled concrete. Quadratic models were suggested based on a higher coefficient of determination (R2) for all responses. Quadratic RSM models yielded R2 equaling 0.90 and 0.94 for compressive strength at 7 days and 28 days, respectively. Similarly, 0.94 and 0.96 for 7-day and 28-day flexural strength and 0.89 for tensile strength. The optimization performed through RSM indicates that 15% MWA and 50% SD yielded higher strength compared to all other mixtures. The predicted optimized data was validated experimentally with an error of less than 5%.

24 November 2021 in Frontiers in Materials
Verified
Journal Article
Open access
OZOsama Zaid
Osama Zaid
Syed Roshan Zamir HashmiSyed Roshan Zamir Hashmi
Syed Roshan Zamir Hashmi
FAFahid Aslam
Fahid Aslam
HAHisham Alabduljabbar
Hisham Alabduljabbar
With the development of technology in every field, it is necessary to recommend an eco-friendly material to be utilized in the construction industry. Recently, using waste/recycled materials in the concrete as a substitute is a trend to bring sustainability to the construction industry, but the recycled/waste materials has poor mechanical properties, thus to enhance these poor properties, this research studies the mechanical performance of sustainable concrete incorporating waste materials as aggregates, the study is performed in the three stages. In the first stage, the natural sand was substituted with recycled sand in the percentage of 0, 35, 70, and 100%, and all the tests i.e. compressive strength, split tensile strength and flexural strength were performed on concrete which was cured in water for 28 days. As the 35% substitution of natural sand with recycled fine aggregate presented the optimum mechanical performance, it was selected for the third stage of the research. In the second and the third stages, the discarded carbon fibers were utilized in concrete with 2, 4, and 6% by weight. A total of 90 samples were prepared for this research, in which 30 samples were cubes, 30 samples were cylinders and 30 samples were beams, all the samples were tested at 28 days. Comparative analysis was performed to validate and verify the results of this paper with the relevant literature. The SEM test was also performed on a fractured concrete surface to study its microstructure. The outcome of tests revealed that the utilization of discarded carbon fibers in concrete enhances compressive, split tensile and flexural strength by 27.8, 17.8, and 35.9% and acts as a crack bridging and also restrain the propagation of the first cracks. Fibers also helped the concrete to improve its energy absorption capacity and ductility.

5 August 2023 in Case Studies in Construction Materials
Verified
Journal Article
Open access
MKMuhammad Imran Khan
Muhammad Imran Khan
NKNasir Khan
Nasir Khan
Syed Roshan Zamir HashmiSyed Roshan Zamir Hashmi
Syed Roshan Zamir Hashmi
MYMuhamad Razuhanafi Mat Yazid
Muhamad Razuhanafi Mat Yazid
NYNur Izzi Md Yusoff
Nur Izzi Md Yusoff
RFRoman Fediuk
Roman Fediuk

17 February 2026 in Construction and Building Materials
Verified
Journal Article
Open access
Syed Roshan Zamir HashmiSyed Roshan Zamir Hashmi
Syed Roshan Zamir Hashmi
HSHelamini Sandagomika
Helamini Sandagomika
Mehrdad ArashpourMehrdad Arashpour
Mehrdad Arashpour
Sudharshan N. RamanSudharshan N. Raman
Sudharshan N. Raman