Polymer-ceramic pressure-sensitive paint (PC-PSP) has been investigated as a surface-pressure sensor for unsteady aerodynamics and short duration measurements. This PSP provides a fast response to a change in pressures with a spray-coating ability. Because it is sprayed onto an aerodynamic surface, the thickness of PC-PSP may play an important role in determining the performance of this sensor. The thickness of other fast PSPs, such as anodized aluminum pressure-sensitive paint, is a major factor in determining its performance. We vary the thickness of PC-PSP from 10 to 240 μm in order to study its effects on PSP measurement characteristics including time response, signal level, pressure sensitivity, and temperature dependency. It is found that the thickness does affect these characteristics. However, a thickness over 80 μm provides uniform performance in these characteristics.
A polymer-ceramic pressure-sensitive paint (PC-PSP) is a fast responding and sprayable PSP which has been applied for capturing global unsteady flows. The luminophore application process is studied to enhance the characterization of the PC-PSP. A dipping deposition method is used to apply a luminophore on a polymer-ceramic coating. The method selects a solvent by its polarity index. The characterization includes the signal level, pressure sensitivity, temperature dependency, and response time. It is found that the luminophore application process affects the steady-state characterizations, such as the signal level, pressure sensitivity, and temperature dependency. A range of change for each characterization, which is based on the minimum quantity, is a factor of 4.7, 9, and 3.8, respectively. A response time on the order of ten microseconds is shown. The application process is not a dominant factor for changing the response time, which is within the uncertainty of the thickness variation. Comparisons of the effects on the luminophore application process and the polymer content are made to discuss the PC-PSP characterization results.
13 June 2019 in Journal of Physics D: Applied Physics
The motion-capturing pressure-sensitive paint (PSP) method is validated under transient illumination to capture unsteady surface pressure. It is applied to measure a wall pressure distribution in a footprint of a fluctuating oblique shock generated by near-surface electric discharge in a supersonic airflow. For a surface pressure measurement using PSP, the electric discharge adds transient illumination that overlaps with the PSP emission. By using the motion-capturing PSP method, unsteady surface pressure including the plasma-induced shock wave is captured with temporal resolution of 10 kHz. Comparison to the existing PSP method as well as uncertainty analysis are also given.
Polymer-ceramic pressure-sensitive paint (PC-PSP) has been used for capturing unsteady pressure over aerodynamic surfaces. Spatial and temporal pressure information is calculated from the luminescent intensity produced by a PC-PSP, which provides a nonintrusive pressure measurement. Despite its benefits, the temperature dependency of PC-PSP makes extraction of quantitative pressure data challenging. The temperature dependency in terms of the static and dynamic characteristics of a ruthenium-based PC-PSP is studied herein. The impact of temperature dependency on PC-PSP characteristics is also discussed in the context of an unsteady pressure measurement.