1 June 2021 in Experimental Thermal and Fluid Science
13 August 2019 in Journal of Physics D: Applied Physics
The results of experimental and computational studies are considered on a near surface electric discharge effect on supersonic airflow near a 15° compression surface. The tests were performed at Mach number M = 2, stagnation pressure P 0 = 1–2.8 bar, stagnation temperature T 0 = 290–600 K, and plasma power W pl = 6–12 kW. They demonstrated a significant effect of plasma on the flow structure and reduction of static pressure on the compression surface. Transient phenomena were analyzed and it was found that the pressure decrease on the ramp was as fast as t < 0.3 ms. Simulations based on 3D unsteady Navier–Stokes equations with plasma modeled as an array of lengthwise heat sources demonstrated adequacy of such simplifications. Further simulations attempted to find an optimal range of plasma power and position in terms of achievable effect, effectiveness of the method, and response time of the system to the plasma actuation. The electric discharge authority for a fast and effective control of aerodynamic forces in a compression ramp configuration is considered.
13 June 2019 in Journal of Physics D: Applied Physics
The motion-capturing pressure-sensitive paint (PSP) method is validated under transient illumination to capture unsteady surface pressure. It is applied to measure a wall pressure distribution in a footprint of a fluctuating oblique shock generated by near-surface electric discharge in a supersonic airflow. For a surface pressure measurement using PSP, the electric discharge adds transient illumination that overlaps with the PSP emission. By using the motion-capturing PSP method, unsteady surface pressure including the plasma-induced shock wave is captured with temporal resolution of 10 kHz. Comparison to the existing PSP method as well as uncertainty analysis are also given.