Industry is increasingly adopting high-speed electric machines due to their high-power density and low cost. However, increasing the speed leads to many challenges that are worth to study since they have relevant impact on the design of the machine. One of these challenges is the losses in stator winding assembly. At low frequency, losses in windings are usually assumed equal to DC losses. However, at high frequency some phenomena become noticeable and worth evaluating since they lead to noticeable losses. AC losses in windings are due to skin effect, proximity effect, and circulating currents. The main models of AC losses in windings in the literature are presented for both circular and rectangular wires. These models are compared using both interior and surface-mounted permanent magnet synchronous machines. Results show that for proximity effect, analytical model is convenient when considering armature reaction only, however, when considering on load case, hybrid model with simple FEA is suitable thanks to its interesting trade-off between accuracy and computation time, which makes it suitable for large-scale optimization. For circulating currents effect, finite element model is unavoidable. Moreover, two important properties concerning circulating currents are stated as well as their mathematical proofs.
8 November 2019 in IEEE Transactions on Vehicular Technology
The need of compact machines increased in recent years due to increases in raw materials’ price. Hence, many studies are currently being conducted on high-speed challenges to propose an optimal design methodology. AC losses in windings are often not included in the optimization process and are treated in post-processing by choosing a suitable conductor’s diameter to mitigate skin and proximity effects. This paper presents an optimization and design methodology for high-speed electric machines considering these losses, using models with an interesting trade-off between computation time and accuracy, which is helpful for large-scale optimization, in which more than 9,600,000 machines are evaluated. Optimizations are conducted on 100 kW high-speed one-layer V-shaped interior permanent magnet synchronous machines, widely used in vehicles thanks to their high power density, based on the specifications of the Peugeot e208, for different values of pole pairs and maximum speed. The influence of lamination thickness, fill factor, and maximum current density on the optimal design is also investigated. This paper concludes the utility of increasing speed to achieve high power density and proposes best alternatives regarding automotive constraints. Results show that the number of pole pairs is not always a key parameter in obtaining the lowest volume, especially at high speed.
Increasing speed of electric machine leads to high losses especially in stator winding assembly due to eddy currents effect. Commonly adopted formula for AC losses calculation tends to be applicable in the case of sinusoidal flux density. In this paper, a hybrid model predicting AC winding loss is presented based on one slot per pole of surface-mounted permanent-magnet machines using two formula taking into account the true flux density waveform. The results obtained comply with finite-elements results. The hybrid model was also used to investigate the influence of tooth-tip on AC losses.
The aviation industry is undergoing electrification due to the increased global focus on reducing emissions in air traffic. Regarding the volatility of raw material prices, one main objective is the increase in the specific power of the motor. This matches the ambitious targets of the CoE project (Center of Excellence) in Finland on high-speed electric motors. The targeted specific power is 20 kW/kg. In this work, motors are designed and optimized for a fully electric regional aircraft. motors with different slot/pole configurations and rotational speed values are studied to determine the advantage of increasing speed in terms of weight reduction. As increasing speed requires the use of a gearbox, the overall weight of the motor and the gearbox is evaluated in post-processing, which allows for determining the impact of high speed on the overall weight. An optimization tool coupled with an electromagnetic and mechanical analysis is used to optimize 1 MW surface mounted permanent magnet synchronous motors (S-PMSMs) for given specifications of regional electric aircraft. Optimization results indicate that there is considerable gain in terms of overall weight only when increasing the speed to the range of 10,000–15,000 rpm.