Leidy Tatiana Contreras Montoya

Ms. Leidy Tatiana Contreras Montoya

Université du Québec à Rimouski, Rimouski, Quebec, Canada
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 August 2021 in Energies
Verified
Journal Article
Open access
PDF file
FMFahed Martini
Fahed Martini
Leidy Tatiana Contreras MontoyaLeidy Tatiana Contreras Montoya
Leidy Tatiana Contreras Montoya
Adrian IlincaAdrian Ilinca
Adrian Ilinca
When operating in cold climates, wind turbines are vulnerable to ice accretion. The main impact of icing on wind turbines is the power losses due to geometric deformation of the iced airfoils of the blades. Significant energy losses during the wind farm lifetime must be estimated and mitigated. Finding solutions for icing calls on several areas of knowledge. Modelling and simulation as an alternative to experimental tests are primary techniques used to account for ice accretion because of their low cost and effectiveness. Several studies have been conducted to replicate ice growth on wind turbine blades using Computational Fluid Dynamics (CFD) during the last decade. While inflight icing research is well developed and well documented, wind turbine icing is still in development and has its peculiarities. This paper surveys and discusses the models, approaches and methods used in ice accretion modelling in view of their application in wind energy while summarizing the recent research findings in Surface Roughness modelling and Droplets Trajectory modelling. An An additional section discusses research on the modelling of electro-thermal icing protection systems. This paper aims to guide researchers in wind engineering to the appropriate approaches, references and tools needed to conduct reliable icing modelling for wind turbines.

1 February 2022 in Energies
Verified
Journal Article
Open access
PDF file
Leidy Tatiana Contreras MontoyaLeidy Tatiana Contreras Montoya
Leidy Tatiana Contreras Montoya
Santiago LainSantiago Lain
Santiago Lain
Adrian IlincaAdrian Ilinca
Adrian Ilinca
The objective of this article is to review the methodologies used in the last 15 years to estimate the power loss in wind turbines due to their exposure to adverse meteorological conditions. Among the methods, the use of computational fluid dynamics (CFD) for the three-dimensional numerical simulation of wind turbines is highlighted, as well as the use of two-dimensional CFD simulation in conjunction with the blade element momentum theory (BEM). In addition, a brief review of other methodologies such as image analysis, deep learning, and forecasting models is also presented. This review constitutes a baseline for new investigations of the icing effects on wind turbines’ power outputs. Furthermore, it contributes to a continuous improvement in power-loss prediction and the better response of icing protection systems.

8 November 2022 in Energies
Verified
Journal Article
Open access
PDF file
FMFahed Martini
Fahed Martini
HIHussein Ibrahim
Hussein Ibrahim
Leidy Tatiana Contreras MontoyaLeidy Tatiana Contreras Montoya
Leidy Tatiana Contreras Montoya
PRPatrick Rizk
Patrick Rizk
Adrian IlincaAdrian Ilinca
Adrian Ilinca
Icing is a severe problem faced by wind turbines operating in cold climates. It is affected by various fluctuating parameters. Due to ice accretion, a significant drop in the aerodynamic performance of the blades’ airfoils leads to productivity loss in wind turbines. When ice accretes on airfoils, it leads to a geometry deformation that seriously increases turbulence, particularly on the airfoil suction side at high angles of attack. Modeling and simulation are indispensable tools to estimate the effect of icing on the operation of wind turbines and gain a better understanding of the phenomenon. This paper presents a numerical study to assess the effect of surface roughness distribution, along with the effect of two turbulence models on estimating wind turbine airfoils’ aerodynamic performance losses in the presence of ice. Aerodynamic parameter estimation was performed using ANSYS FLUENT, while ice accretion was simulated using ANSYS FENSAP-ICE. The results using the adopted modeling approaches and the simulation tools were compared with another numerical study and validated against experimental data. The validation process demonstrated the model’s accuracy when considering roughness distribution via the beading model available in ANSYS FENSAP-ICE. The two turbulence models examined (Spalart–Allmaras and k-ω SST) gave comparable results except for the drag at high angles of attack. The k-ω SST model was more efficient in replicating turbulence at high angles of attack, leading to higher accuracy in aerodynamic loss estimation.

26 August 2019 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
PDF file
Santiago LainSantiago Lain
Santiago Lain
Leidy Tatiana Contreras MontoyaLeidy Tatiana Contreras Montoya
Leidy Tatiana Contreras Montoya
Omar D LopezOmar D Lopez
Omar D Lopez

14 November 2018 in Energies
Verified
Journal Article
Open access
Leidy Tatiana Contreras MontoyaLeidy Tatiana Contreras Montoya
Leidy Tatiana Contreras Montoya
Omar D LopezOmar D Lopez
Omar D Lopez
Santiago LainSantiago Lain
Santiago Lain
In this contribution, unsteady three-dimensional numerical simulations of the water flow through a horizontal axis hydrokinetic turbine (HAHT) of the Garman type are performed. This study was conducted in order to estimate the influence of turbine inclination with respect to the incoming flow on turbine performance and forces acting on the rotor, which is studied using a time-accurate Reynolds-averaged Navier-Stokes (RANS) commercial solver. Changes of the flow in time are described by a physical transient model based on two domains, one rotating and the other stationary, combined with a sliding mesh technique. Flow turbulence is described by the well-established Shear Stress Transport (SST) model using its standard and transitional versions. Three inclined operation conditions have been analyzed for the turbine regarding the main stream: 0° (SP configuration, shaft parallel to incoming velocity), 15° (SI15 configuration), and 30° (SI30 configuration). It was found that the hydrodynamic efficiency of the turbine decreases with increasing inclination angles. Besides, it was obtained that in the inclined configurations, the thrust and drag forces acting on rotor were lower than in the SP configuration, although in the former cases, blades experience alternating loads that may induce failure due to fatigue in the long term. Moreover, if the boundary layer transitional effects are included in the computations, a slight increase in the power coefficient is computed for all inclination configurations.

1 January 2021
Verified
Book Chapter
Closed access
Leidy Tatiana Contreras MontoyaLeidy Tatiana Contreras Montoya
Leidy Tatiana Contreras Montoya
SLSantiago Lain
Santiago Lain
Mohamad IssaMohamad Issa
Mohamad Issa
AIAdrian Ilinca
Adrian Ilinca