Thi Bich Mac

Dr. Thi Bich Mac

Hung Yen University of Technology and Education, Hưng Yên, Vietnam
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 April 2023 in Metals
Verified
Journal Article
Open access
PDF file
Thi Bich MacThi Bich Mac
Thi Bich Mac
The -Thanh LuyenThe -Thanh Luyen
The -Thanh Luyen
Duc-Toan NguyenDuc-Toan Nguyen
Duc-Toan Nguyen
This study aimed to investigate the effects of Thermal-Assisted Machining (TAM) on SKD11 alloy steel using titanium-coated hard-alloy insert cutting tools. The microstructure, material hardness, chip color, cutting force, chip shrinkage coefficient, roughness, and vibration during TAM were evaluated under uniform cutting conditions. The machining process was monitored using advanced equipment. The results indicated that thermal-assisted processing up to 400 °C did not alter the microstructure and hardness of the SKD11 alloy steel. However, a significant variation in chip color was observed, indicating improved heat transfer through TAM. The cutting force, vibration amplitude of the workpiece, and surface roughness all decreased with increasing TAM. Conversely, the chip shrinkage coefficient of the machined chips tended to increase due to the high temperatures.

1 August 2023 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
The -Thanh LuyenThe -Thanh Luyen
The -Thanh Luyen
Thi Bich MacThi Bich Mac
Thi Bich Mac
TBTien-Long Banh
Tien-Long Banh
Duc-Toan NguyenDuc-Toan Nguyen
Duc-Toan Nguyen

24 March 2022 in Machines
Verified
Journal Article
Open access
PDF file
Thi Bich MacThi Bich Mac
Thi Bich Mac
The -Thanh LuyenThe -Thanh Luyen
The -Thanh Luyen
Duc-Toan NguyenDuc-Toan Nguyen
Duc-Toan Nguyen
This study proposed an innovative method for improving the prediction of the cutting force (F) and chip shrinkage coefficient (K) for milling of SKD11 alloy steels using simulations and experimental results. Preliminary experimental measurements of the F and K were made for variable cutting speeds and depths, and simulations were then conducted using the Johnson–Cook model. However, significant discrepancies between the experiments and simulations were observed for the F and K. Therefore, an improved method was proposed, utilizing the relationship between simulation/experimental cutting forces and the equivalent fracture strain of simulation elements in the shear zone in the space of the stress triaxiality and equivalent strain. The progression of fracture strain paths according to the stress triaxiality until the desired cutting forces were achieved was utilized for adding new data to the fracture strain locus in the space of the stress triaxiality and equivalent strain. The new fracture strain locus was adopted again, to simulate and predict the F and K at full 2 × 3 levels of cutting speeds and cutting depths, and the results were compared with those of the corresponding experiments. Based on the highest deviations between the simulation and experimental data for the cutting force (5.29%) and chip shrinkage coefficient (5.08%), this study confirmed that the proposed method for determining the new fracture strain locus can improve the prediction of the F and K for milling of SKD11 alloy steels.

17 May 2023 in Metals
Verified
Journal Article
Open access
PDF file
Thi Bich MacThi Bich Mac
Thi Bich Mac
The -Thanh LuyenThe -Thanh Luyen
The -Thanh Luyen
Duc-Toan NguyenDuc-Toan Nguyen
Duc-Toan Nguyen
This research investigates the impact of high-speed and thermal-assisted machining (HS-TAM) on tool wear and surface roughness during the milling of SKD11 steel. The goal is to identify high-speed and elevated temperature zones that can improve machining efficiency, enhance surface quality, minimize costs, and extend tool life. The study involves the high-speed milling of SKD11 steel at various temperature conditions to evaluate the effect of temperature on tool wear and surface roughness. Additionally, experiments are conducted at the highest allowable support temperature with increased high-speed cutting to examine the effect of high speed on tool wear and surface roughness. The study demonstrates the correlation between cutting-tool wear and surface roughness at various high-speed cutting conditions and TAM environments and provides recommendations for cutting speeds and heating temperatures for different quality and productivity objectives. The findings indicate that high-speed milling of SKD11 at 600 m/min and 500 °C can decrease cutting tool-wear height (wear volume) and surface roughness by 82.47% (95.74%) and 91.08%, respectively, compared to machining at room temperature. Furthermore, the higher-speed modes at 500 °C result in a slight increase in wear height and surface roughness for high-speed cutting below 800 m/min, but reduces surface roughness for high-speed cutting beyond 800 m/min, reaching a value of 0.158 µm at the high-speed cutting limit of 1000 m/min.

26 November 2018 in Metals
Verified
Journal Article
Open access
PDF file
Thi Bich MacThi Bich Mac
Thi Bich Mac
VDVan-Chien Dinh
Van-Chien Dinh
BTB. Tien-Long
B. Tien-Long
Duc-Toan NguyenDuc-Toan Nguyen
Duc-Toan Nguyen
This paper investigates cutting force in thermal-assisted machining (TAM) by induction heating for SKD11 tool steel which is widely used in the mold industry. Experimental studies were first conducted at room and elevated temperatures to evaluate the effectiveness of the heating process on chip morphology and the cutting forces during the thermal-assisted machining and comparing with conventional machining method. The Taguchi method based on orthogonal array and analysis of variance ANOVA method was then used to design the number of experiments and evaluate the influence of cutting speed, feed rate, cutting depth, and elevated temperature on the cutting force. Study results showed a decrease in the cutting force in the TAM process. The optimal condition of parameters obtained for thermal-assisted machining were cutting speed 280 m/min, feed rate 230 mm/min, cutting depth 0.5 mm and temperature 400 °C. Finally, a proposed equation was established to determine the cutting force that was presented as a function of elevated temperatures when milling SKD11 material. A proposed cutting force model was compared, evaluated and confirmed to be in good agreement with experimental results.

11 October 2016 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
TPThi-Hoa Pham
Thi-Hoa Pham
Thi Bich MacThi Bich Mac
Thi Bich Mac
VTVan-Canh Tong
Van-Canh Tong
TBTien-Long Banh
Tien-Long Banh
Duc-Toan NguyenDuc-Toan Nguyen
Duc-Toan Nguyen
This article predicts the relationship between chip shrinkage coefficient and cutting parameters such as cutting speed and uncut chip thickness in a cutting process of A6061 aluminum alloy. To this end, shrinkage coefficient–based finite element method was first estimated using the Johnson–Cook (J-C) and Bao–Wierzbicki (B-W) material fracture models. After that, experimental measurements of the chip shrinkage coefficients were performed at the same cutting conditions to compare with simulation data and confirm the accuracy of material damage models. By a simultaneous evaluation of the effects of cutting parameters on the chip shrinkage coefficient, the B-W model was found to match well with the experiment. So that, the B-W model was then utilized to verify the effect of various cutting speeds and uncut chip thicknesses on the chip shrinkage coefficient and cutting force. Finally, using the least square method, the relationship between chip shrinkage coefficient and cutting force was obtained. The above-mentioned relationship is believed to be useful in determination of optimal cutting conditions in high-speed machining.