Torsten Schuchardt

Mr. Torsten Schuchardt

TU Braunschweig, Germany
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

4 August 2021 in Metals
Verified
Journal Article
Open access
PDF file
TSTorsten Schuchardt
Torsten Schuchardt
SMSebastian Müller
Sebastian Müller
KDKlaus Dilger
Klaus Dilger
Increasing the service life of die casting dies is an important goal of the foundry industry. Approaches are either material- or process-related. Despite new material concepts, hot work steels such as H11 are still predominantly used in the uncoated condition for die casting dies. In order to withstand the stresses that occur, this steel is used exclusively in the quenched and tempered condition. Required properties such as high high-temperature strength and high hardness combined with high toughness are, in principle, contradictory and can only be adjusted consistently over the entire die by furnace-based heat treatment. However, the results of various investigations have shown that improvements in the thermal shock resistance and wear resistance of hot work tool steels can be achieved by thermally influencing the microstructure near the surface. Based on these studies and related findings, an approach to surface heat treatment using the electron beam was developed. Due to the particle character of the radiation and the associated possibility of high-frequency beam deflection, the electron beam offers significantly greater flexibility in energy input into the workpiece surface compared with lasers or induction. The overall technological concept envisages replacing furnace-based heat treatment in the production of casting dies by localized and demand-oriented boundary layer heat treatment with the electron beam. The experiments include, on the one hand, the experimental determination of a suitable temperature–time interval with a focus on short-term austenitization. On the other hand, a simulation-based approach of boundary layer heat treatment with validation of a suitable heat source is investigated. Regarding short-term austenitization, the corresponding temperature and time range could be narrowed down more precisely. Some of these parameter combinations seem to be very suitable for practical use. The test specimens show a hard surface layer with a depth of at least up to 6 mm and a very tough buffer layer. Numerical simulation is used to estimate the resulting metallurgical microstructure and the achievable hardness as a function of the temperature–time interval. In addition, the results provided show the possibility of determining and optimizing the material properties by means of a simulation-based approach within the framework of a purely digital process planning and subsequently transferring them into a process planning. In the technical implementation, a temperature control was first established by means of a two-color pyrometer. In the further course of research, the pyrometer will be supplemented by an internally installed infrared camera, which will allow the reproducible setting of specified temperature profiles even for complex, large-area contours in the future.

8 September 2020 in Metals
Verified
Journal Article
Open access
PDF file
YKYosra Kouki
Yosra Kouki
SMSebastian Müller
Sebastian Müller
TSTorsten Schuchardt
Torsten Schuchardt
KDKlaus Dilger
Klaus Dilger
In the case of casting processes with permanent molds, there is still a relatively pronounced lack of knowledge regarding the locally prevailing heat transfer between casts and mold. This in turn results in an insufficient knowledge of the microstructure and the associated material properties in the areas of the casting component close to the surface. Therefore, this work deals with the design and evaluation of a test tool with an integrated sensor system for temperature measurements, which was applied to obtain a time-dependent heat transfer coefficient (HTC) during casting solidification. For this purpose, the setup, design and computational approach are described first. Special attention is paid to the qualification of the multi-depth sensor and the calculation method. For the calculations, an inverse estimation method (nonlinear sequential function) was used to obtain the HTC profiles from the collected data. The developed sensor technology was used in a test mold to verify the usability of the sensor technology and the plausibility of the obtained calculation results under real casting conditions and associated temperature loads. Both the experimental temperature profiles and the HTC profiles showed that, in the evaluated casting series, the peak values determined were close to each other and reached values between 6000 W/(m2·K) and 8000 W/(m2·K) during solidification.