This study aimed to investigate the heat stability of dispersions from reconstituted reduced-calcium milk protein concentrate (RCMPC) with 80% protein or more. The tested RCMPC powders were produced from skim milk subjected to CO₂ treatment before and during the process of ultrafiltration. The CO₂ injection was controlled to obtain 0 (control, no CO₂ injection), 20, 30, and 40% reduction in calcium levels in the RCMPC powders. The RCMPC powders were reconstituted to 10% (wt/wt) protein in deionized water. These dispersions were tested for heat stability in a rocking oil bath at 140°C at unadjusted, 6.5, 6.7, 6.9, and 7.1 pH. Calcium ion activity (CIA) and ionic strength measurements were carried out using a Ca ion-selective electrode and conductivity meter. Unadjusted pH of the dispersions varied from 6.8 in control to 5.96 in 40% RCMPC dispersions. The CIA of unadjusted dispersions ranged from 1.31 mM in control to 2.83 mM in 40% RCMPC. Heat stability, expressed as heat coagulation time (HCT) of unadjusted dispersions decreased as the level of Ca removal in powders increased (from 13.81 min in control to 0.46 min in 40% RCMPC) and was negatively correlated with the CIA of the dispersions. For control RCMPC dispersions, the minimum and maximum heat stability were observed at dispersion pH of 6.5 and 6.9, respectively, followed by a decrease at pH 7.1 (CIA was the lowest). Dispersions from 40% RCMPC and pH 7.1 had the maximum HCT of 30.94 min among all RCMPC dispersions at all pH values. From this study, it can be concluded that improved heat stability in high protein formulation beverages subjected to UHT processing could be achieved through calcium reduction in milk protein concentrates using CO₂ injection.

This study aimed to examine the physicochemical properties of 30% calcium (Ca)-reduced micellar casein 80% protein powders (RC-MCC) and the functional properties of the resultant dispersions. The calcium reduction in the micellar casein (MCC) powder was achieved by subjecting the liquid micellular casein obtained from the microfiltration of pasteurized skim milk to carbon dioxide (CO₂) treatment before and during ultrafiltration. The CO₂ injection was controlled to obtain a 0 and 30% reduction in calcium in the C-MCC (control) and RC-MCC powders, respectively. The MCC powders were tested for physicochemical properties such as chemical composition, particle size distribution, and bulk density. The MCC powders were reconstituted in deionized water to test the functional properties of the dispersions, i.e., solubility, viscosity, heat stability, emulsifying capacity, emulsion stability, foam capacity, and foam stability. The CO₂ injection did not result in any significant differences in the composition except mineral contents, particularly calcium. The particle size and bulk density of RC-MCC powders were significantly (p < 0.05) lower than control powders. The RC-MCC powder dispersions showed increased heat stability compared to control, whereas no significant changes in viscosity and emulsification capacity were observed between the two dispersions. However, the emulsion stability and foam stability of RC-MCC dispersions were significantly lower than C-MCC dispersions. This study showed that by utilizing a novel microfiltration–CO₂ injection–ultrafiltration process, 30% calcium-reduced MCC powder was commercially feasible. This research also provides a detailed understanding of the effect of calcium reduction on the functional properties of resultant MCC dispersions. It showed that calcium reduction could improve the solubility of the powders and heat stability and foam capacity of the dispersions.

Cheese is a dairy product produced by precipitating the casein of milk using starter cultures and rennet (e. g. enzymes) through a chemical process. Cheese is different among countries and could be made from cow’s, buffalo’s, goat’s, sheep’s, or camel’s milk. Cheese is a good source of protein and minerals (such as calcium and phosphorus) that have nutritional values. Cheese is also essential for building healthy bones and teeth and provide the brain with essential fatty acids. Different technologies and different milk have been utilized to manufacture the traditional Egyptian cheeses, which resulted in differences in the composition, cheese types, and flavors. Consequently, this work aims to review and highlight the technological and chemical aspects of the most popular Egyptian cheese varieties, namely, Domiati cheese, Karish cheese, Mish cheese, and Ras cheese made from different sources of milk during ripening; and to briefly discuss the health benefits of the cheese.