The heterogeneous photo-Fenton type system has huge fame in the field of wastewater treatment due to its reusability and appreciable photoactivity within a wide pH range. This research investigates the synthesis and characterization of iron(II) doped copper ferrite (Cu^II_(x)Fe^II_(1-x)Fe^III₂O₄ nanoparticles (NPs) and their photocatalytic applications for the degradation of methylene blue (MB) as a model dye. The NPs were prepared via simple co-precipitation technique and calcination. The NPs were characterized by using Raman spectroscopy, X-ray diffractometry (XRD), scanning electron microscopy (SEM), and diffuse reflectance spectroscopy (DRS). SEM reveals the structural change from the spherical-like particles into needle-like fine particles as the consequence of the increasing ratio of copper(II) in the ferrites, accompanied by the decrease of the optical band-gap energies from 2.02 to 1.25 eV. The three major determinants of heterogeneous photo-Fenton system, namely NPs concentration, hydrogen peroxide concentration and pH, on the photocatalytic degradation of MB were studied. The reusability of NPs was found to be continuously increasing during 4 cycles. It was concluded that iron(II) doped copper ferrites, due to their favorable band-gap energies and peculiar structures, exhibit a strong potential for photocatalytic-degradation of dyes, for example, MB.

Heterogeneous photo-Fenton systems offer efficient solutions for the treatment of wastewaters in the textile industry. This study investigated the fabrication and structural characterization of novel peculiar-shaped Cu^IIO, Fe^III₂O₃, and Fe^IIO nanoparticles (NPs) compared to the properties of the iron(II)-doped copper ferrite Cu^II_0.4Fe^II_0.6Fe^III₂O₄. The photocatalytic efficiencies of these NPs and the composite of the simple oxides (Cu^IIO/Fe^IIO/Fe^III₂O₃) regarding the degradation of methylene blue (MB) and rhodamine B (RhB) as model dyes were also determined. The catalysts were synthesized via simple co-precipitation and calcination technique. X-ray diffractometry (XRD), scanning electron microscopy (SEM), and diffuse reflectance spectroscopy (DRS) were utilized for structural characterization. The structure of Cu^IIO was bead-like connected into threads, Fe^III₂O₃ was rod-like, while Fe^IIO pallet-like, with average crystallite sizes of 18.9, 36.9, and 37.1 nm, respectively. The highest degradation efficiency was achieved by Cu^IIO for RhB and by Cu^II_0.4Fe^II_0.6Fe^III₂O₄ for MB. The Cu^IIO/Fe^IIO/Fe^III₂O₃ composite proved to be the second-best catalyst in both cases, with excellent reusability. Hence, these NPs can be successfully applied as heterogeneous photo-Fenton catalysts for the removal of hazardous pollutants. Moreover, the simple metal oxides and the iron(II)-doped copper ferrite displayed a sufficient antibacterial activity against Gram-negative Vibrio fischeri.

Since water-soluble porphyrin complexes of lanthanides(III) have proved to be promising for medical applications (e.g., luminescence imaging, photodynamic therapy, and theranostics), the investigation of the formation, photophysical, and photochemical properties of such coordination compounds provides useful pieces of information for their potential usage. Steady-state and time-resolved fluorometry, UV–Vis absorption spectroscopy, and continuous-wave photolysis were utilized for this purpose. 5,10,15,20-Tetrakis(4-sulfonatophenyl)porphyrin formed mono- and bisporphyrin complexes with samarium(III), europium(III), and gadolinium(III) as representatives in the middle of the lanthanide series. The special photoinduced behavior of these compounds was mostly determined by the position of the metal center, which was located out of the ligand plane, thus distorting it. Besides, the photochemical and, especially, photophysical features of the corresponding mono- and bisporphyrin complexes were similar because, in the latter species, two monoporphyrins were connected by a weak metal bridge between the peripheral sulfonato substituents (tail-to-tail dimerization). The formation of these coordination compounds and the transformation reactions between the mono- and bisporphyrins were rather slow in the dark at room temperature. These processes were accelerated by visible irradiation. However, dissociation and, especially, redox degradation were the main photoreactions in these systems, although with low quantum yields. Additionally, depending on the excitation wavelength, new types of photoproducts were also detected.

Water-soluble metalloporphyrins, depending on the metal center, possess special spectral, coordination, and photochemical features. In nickel(II) porphyrins, the Ni(II) center can occur with low-spin or high-spin electronic configuration. In aqueous solution, the cationic nickel(II) complex (Ni(II)TMPyP⁴⁺, where H₂TMPyP⁴⁺ = 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin), exists in both forms in equilibrium. In this study, an equilibrium system involving the low-spin and high-spin forms of Ni(II)TMPyP⁴⁺ was investigated via application of irradiation, temperature change, and various potential axial ligands. Soret band excitation of this aqueous system, in the absence of additional axial ligands, resulted in a shift in the equilibrium toward the low-spin species due to the removal of axial solvent ligands. The kinetics and the thermodynamics of the processes were also studied via determination of the rate and equilibrium constants, as well as the ΔS, ΔH, and ΔG values. Temperature increase had a similar effect. The equilibrium of the spin isomers was also shifted by decreasing the solvent polarity (using n-propanol) as well as by the addition of a stronger coordinating axial ligand (such as ammonia). Since triethanolamine is an efficient electron donor in Ni(II)TMPyP⁴⁺-based photocatalytic systems, its interaction with this metalloporphyin was also studied. The results promote the development of efficient photocatalytic systems based on this complex.

Among the complexes of porphyrins, special attention has been paid to those possessing out-of-plane (OOP) structures, for the formation of which the size, as well as the coordinative character of the metal center are responsible. In these coordination compounds, the central atom cannot fit coplanarly into the cavity of the ligand, hence, it is located above the porphyrin plane, distorting it. Equilibria and kinetics of the complex formation, spectrophotometric, photophysical and primary photochemical properties of post-transition and lanthanide OOP metalloporphyrins were investigated, in addition electronic structural calculations were performed; hence, the general OOP characteristics were determined.Meanwhile, few doubtful questions have attempted to be answered concerning the categorization of metalloporphyrins, the borderline case complexes and hyperporphyrins.

CeF₃ displays favorable scintillation properties, which have been utilized for decades in various solid-state systems. Its emission undergoes multi-component decays, which were interpreted by lattice defects and so-called intrinsic features herein. This study of the complex equilibria in connection with photophysical behavior of the cerium(III)-fluoride system in solution gave us the possibility to reveal the individual contribution of the [Ce^IIIF_x(H₂O)_9−x]^3−x species to the photoluminescence. Spectrophotometry and spectrofluorometry (also in time-resolved mode) were used, and combined with sophisticated evaluation methods regarding both the complex equilibria and the kinetics of the photoinduced processes. The individual photophysical parameters of the [Ce^IIIF_x(H₂O)_9−x]^3−x complexes were determined. For the kinetic evaluation, three methods of various simplifications were applied and compared. The results indicated that the rates of some excited-state equilibrium processes were comparable to those of the emission decay steps. Our results also contribute to the explanation of the multi-component emission decays in the CeF₃-containing scintillators, due to the various coordination environments of Ce³⁺, which can be affected by the excitation leading to the dissociation of the metal-ligand bonds.