The results of a study on the geometric shape of the damper on the efficiency of the ultrasonic piezoelectric transducer are presented. In particular, a damper in the form of a truncated cone is considered, the generatrix of which has an inclination angle α relative to the diameter of the piezoceramic plate. The shape of the damper in the form of a truncated cone is chosen based on the a priori assumption that this helps to increase the path of the wave in the damper material due to numerous reflections in it. A criterion for the efficiency of damper operation is proposed. The optimal (from the point of view of the damper efficiency) value of the angle α was determined theoretically and experimentally. The technology of its production is described. Satisfactory agreement between the results of theoretical and experimental studies was noted.

We present the results of studying the influence of the geometric shape of the damper on its effectiveness and the overall efficiency of the emission–reception system. One of possible shapes for the damper is considered where it is a truncated cone with the generatrix tilted relative to the piezoelectric plate plane. A criterion for evaluating the efficiency of the damper operation is proposed. The study includes the results of computational-theoretical (using the finite element method) and experimental research on the influence of the tilt angle of the damper generatrix on the signal reflected from its rear part. The generatrix tilt angle at which the minimum of noise signal is achieved is determined. A study of the emission–reception system under load on the aquatic environment is carried out. A satisfactory agreement between the theoretical and experimental results is noted.