Terahertz (THz) technology has firmly established itself as an effective sensing and nondestructive testing technique for the detection of substances and physico-chemical evaluation of materials and structural systems since its first emergence almost three decades ago. To date, both the effectiveness and accuracy of this technology have been extensively demonstrated in a myriad of applications across the spectrum of research and development all the way to process analytical technology, quality control, nondestructive testing, and structural health monitoring. These applications are generally enabled by the production and availability of advanced, versatile, robust, highly accurate, and industrially rugged THz spectroscopy and imaging systems, the unique properties of THz waves compared with other electromagnetic waves, as well as the advancements in electronics, photonics, and THz metamaterial systems development. This article presents a comprehensive state-of-the-art and state-of-the-practice review of sensing and nondestructive testing applications of THz technology and analyzes the role of THz metamaterials in enhancing the resolution and sensitivity of THz systems. The study also provides a general overview of the fundamentals of THz spectroscopy and imaging systems and discusses the suitability of THz sensing and nondestructive testing in a variety of real-world application scenarios ( e.g . composites’ defect detection and evaluation, paints and coatings thickness measurement and characterization, biomolecule detection, etc .). Aspects such as the noise caused by the presence of barriers, challenges with experimental implementations and operability of THz systems, long times required to acquire THz images, as well as limited customizability and portability of currently available THz systems are also discussed.
Terahertz time-domain spectroscopy is a contactless and nondestructive testing technique that is often used to measure the thickness of layered materials. However, the technique presents limited thickness detection resolution, especially in the thin thermally grown oxide (TGO) of thermal barrier coatings whose thickness is below 30 µm. In this study, an SWT-BP algorithm combining a stationary wavelet transform (SWT) and a backpropagation (BP) neural network was proposed, and the regression coefficient of SWT-detailed results was 0.92. The prediction results were in good agreement with the real-time results; it demonstrated that the proposed algorithm was able to achieve a thickness prediction of up to 1–29 µm of the TGO. The proposed algorithm is suitable for thin thickness detection of the TGO.
18 January 2023 in Chinese Journal of Mechanical Engineering
The use of terahertz time-domain spectroscopy (THz-TDS) for the nondestructive testing and evaluation (NDT&E) of materials and structural systems has attracted significant attention over the past two decades due to its superior spatial resolution and capabilities of detecting and characterizing defects and structural damage in non-conducting materials. In this study, the THz-TDS system is used to detect, localize and evaluate hidden multi-delamination defects (i.e., a three-level multi-delamination system) in multilayered GFRP composite laminates. To obtain accurate results, a wavelet shrinkage de-noising algorithm is used to remove the noise from the measured time-of-flight (TOF) signals. The thickness and location of each delamination defect in the z -direction (i.e., through-the-thickness direction) are calculated from the de-noised TOF signals considering the interaction between the pulsed THz waves and the different interfaces in the GFRP composite laminates. A comparison between the actual and the measured thickness values of the delamination defects before and after the wavelet shrinkage denoising process indicates that the latter provides better results with less than 3.712% relative error, while the relative error of the non-de-noised signals reaches 16.388%. Also, the power and absorbance levels of the THz waves at every interface with different refractive indices in the GFRP composite laminates are evaluated based on analytical and experimental approaches. The present study provides an adequate theoretical analysis that could help NDT&E specialists to estimate the maximum thickness of GFRP composite materials and/or structures with different interfaces that can be evaluated by the THz-TDS. Also, the accuracy of the obtained results highlights the capabilities of the THz-TDS for the NDT&E of multilayered GFRP composite laminates.