Fujian Provincial Key Laboratory of Terahertz Functional Devices and Intelligent Sensing, School of Mechanical Engineering and Automation, and Institute of Precision Instrument and Intelligent Measurement & Control, Fuzhou University, Fuzhou, China
Auto-generated profile, based on publicly available information
Zhenghao Zhang
Fujian Provincial Key Laboratory of Terahertz Functional Devices and Intelligent Sensing, School of Mechanical Engineering and Automation, and Institute of Precision Instrument and Intelligent Measurement & Control, Fuzhou University, Fuzhou, China
Thermal barrier coatings (TBCs) are usually used in high temperature and harsh environment, resulting in thinning or even spalling off. Hence, it is vital to detect the thickness of the TBCs. In this study, a hybrid machine learning model combined with terahertz time-domain spectroscopy technology was designed to predict the thickness of TBCs. The terahertz signals were obtained from the samples prepared in laboratory and actual turbine blade. The principal component analysis (PCA) method was used to decrease the data dimensions. Finally, an extreme learning machine (ELM) was proposed to establish the thickness of TBCs prediction model. Genetic algorithm (GA) was selected to optimize the model to make it more accurate. The results showed that the root correlation coefficient (R2) exceeded 0.97 and the errors (root mean square error and mean absolute percentage error) were less than 2.57. This study proposes that terahertz time-domain technology combined with PCA–GA–ELM model is accurate and feasible for evaluating the thickness of the TBCs.
While thermal barrier coatings (TBCs) are being sprayed onto aero-engine turbine blades, or while the engine blade is working, high temperatures and strong impact forces will damage TBCs under thermal cycles, resulting in the coating peeling off from the blades. The current method of using ECT, IRT, or another method alone cannot achieve the real-time detection of coating defects with both high precision and high penetration power. Two detection methods, namely, terahertz pulsed imaging (TPI) and optical coherence tomography (OCT), were combined to evaluate typical defects observed in TBCs (including internal debonding cracks, surface high-temperature cracks, and surface etched cracks). The results showed that the OCT system successfully obtained the micron-level axial resolution, but the detection depth of the OCT system was limited. The TPI system achieved a higher penetration depth than OCT—hence, it can be used for the nondestructive detection and evaluation of the internal debonding defects in the sample—but its resolution needs to be improved. Following this conclusion, a method is proposed using TPI and OCT concurrently for the nondestructive testing and quantitative evaluation of TBCs on etched cracks, thus achieving progress both in terms of depth and resolution. In our experiment, defects with a depth of 519 μm and a width of 100 μm were measured. The proposed method is suitable for situations where multiple defects in TBC samples of blades need to be detected simultaneously during the working process. When there are defects deep inside the sample, more small cracks on the surface can be evaluated to achieve a combination of depth and accuracy.
In this study, a non-destructive testing method for crack defects of self-lubricating sliding bearing coating based on terahertz time-domain spectroscopy was proposed. The self-lubricating coating materials were revealed to have good penetration and characteristic response in the terahertz band through experiments. To solve the problem of difficulty in signal feature extraction caused by overlap, the broad learning system was used to classify and predict time-domain signals of crack defects. The identification accuracy for crack defects is 96.08%, and the mean relative errors of prediction for interface and internal cracks (5 to 95 μm in size) are 4.16% and 3.40%, respectively. The method proved the applicability for qualitative and quantitative evaluation in crack defects, which is considered a new idea for the non-destructive testing of self-lubricating coating.
As an impact source localization technique, Lamb waves are commonly used to detect low velocity impacts in composite structures. However, the performance of Lamb waves is susceptible to vibration conditions. In this paper, vibration effects on Lamb waves are explored, and an adaptive-filtering enhanced multiple signal classification (AF-MUSIC) method is proposed to generate a relative robust impact source localization method. The response sensor array signals are contaminated by noises, which makes the traditional multiple signal classification (MUSIC) method unable to localize impact sources. In present method, the adaptive-filtering is utilized to reduce vibration induced noises of array data, then the impact position represented by the angle and distance in polar coordinates are finally estimated by scanning the whole monitoring area using MUSIC. The experimental results show that the present method can relatively robust localizes impact sources effectively, especially for the vibration conditions.