Wangjie Wu

Dr. Wangjie Wu


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 June 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Dongdong YuanDongdong Yuan
Dongdong Yuan
Chengwei XingChengwei Xing
Chengwei Xing
Wei JiangWei Jiang
Wei Jiang
JXJingjing Xiao
Jingjing Xiao
Wangjie WuWangjie Wu
Wangjie Wu
YLYupeng Li
Yupeng Li
To investigate the effect of styrene-butadiene-styrene (SBS) modifier content on the viscoelastic behavior of SBS-modified asphalt (SBSMA) at different temperatures and phase structures, the star SBS modifier was chosen to fabricate seven types of SBSMA with different contents. Multiple stress creep recovery (MSCR), linear amplitude sweep (LAS), and low-temperature frequency sweep tests were adopted to study the influence of SBS modifier content on the viscoelastic performance of SBSMA at high to low temperatures. The SBSMA’s microstructure with different contents was investigated using a fluorescence microscope. The results indicated that the change in non-recoverable creep compliance and creep recovery rate was bounded by 4.5% content at high temperatures, with an apparent turning point. The changing slope of content at less than 4.5% was much higher than that of the content greater than 4.5%. At medium temperatures, the fatigue life of SBSMA increased exponentially with the rising modifier content. The rate of increase in fatigue life was the largest as the content increased from 4.5% to 6.0%. At low temperatures, the low-temperature viscoelastic property index G (60 s) of SBSMA decreased logarithmically as the modifier content increased. In terms of the microscopic phase structure, the SBS modifier gradually changed from the dispersed to the continuous phase state with the increasing SBS modifier content.

7 October 2024 in Construction and Building Materials
Verified
Journal Article
Closed access
Wangjie WuWangjie Wu
Wangjie Wu
HLHuisi Li
Huisi Li
Olena SevastyanovaOlena Sevastyanova
Olena Sevastyanova
NKNicole Kringos
Nicole Kringos
MCMaria Chiara Cavalli
Maria Chiara Cavalli

6 July 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
JXJingjing Xiao
Jingjing Xiao
TWTeng Wang
Teng Wang
JHJinlong Hong
Jinlong Hong
CRChong Ruan
Chong Ruan
YZYufei Zhang
Yufei Zhang
Wangjie WuWangjie Wu
Wangjie Wu
The current focus of research attention on reclaimed asphalt pavement (RAP) utilization is expanding the applications of RAP. This study aims to analyze the road performance of recycled permeable asphalt mixtures (RPAMs), which represents a novel direction for utilizing RAP. Firstly, the Marshall design method was used to carry out the material composition design of the RPAM with varying RAP contents (10%, 20%, and 30%). Subsequently, the performance of the RPAM with different RAP contents (10%, 20%, and 30%) and preheating temperatures (120 °C, 130 °C, 140 °C, 150 °C, and 160 °C) was tested with a permeable asphalt mixture containing 12% high-viscosity asphalt as the control group. The mixture’s performance included high-temperature stability, low-temperature crack resistance, water stability, anti-raveling performance, and dynamic mechanical properties. The results indicate that the higher the RAP content, the better the high-temperature performance of the RPAM, while the low-temperature performance, water stability, and anti-raveling performance deteriorate. At 30% RAP content, its pavement performance is comparable to that of the control group mixture. However, increasing RAP preheating temperature can improve low-temperature and water stability but may reduce high-temperature performance. The optimal RAP preheating temperature for pavement performance is between 140 and 150 °C. The dynamic modulus test showed that the higher the RAP content, the greater the dynamic modulus of the RPAM, leading to better high-temperature stability but reduced low-temperature crack resistance. The influence of RAP preheating temperature is the opposite. These test results demonstrate the feasibility of utilizing RAP for paving permeable asphalt pavement under controlled RAP content and preheating temperature conditions.

29 July 2025 in Construction and Building Materials
Verified
Journal Article
Closed access
JZJing Zhao
Jing Zhao
ZGZhiwei Gao
Zhiwei Gao
Wangjie WuWangjie Wu
Wangjie Wu
YTYuan Tian
Yuan Tian
JFJiangtao Fan
Jiangtao Fan
XWXuancang Wang
Xuancang Wang

4 March 2026 in Materials
Verified
Journal Article
Open access
PDF file
YNYunfan Nie
Yunfan Nie
Wangjie WuWangjie Wu
Wangjie Wu
Jinhuan ShanJinhuan Shan
Jinhuan Shan
PHPeng Hongxin
Peng Hongxin
FGFeiyang Guo
Feiyang Guo
JXJingjing Xiao
Jingjing Xiao
With the continuous advancement of autonomous driving technology, lane marking-based environment perception has become a critical component of autonomous vehicle systems. However, long-term vehicle loads cause road markings to deteriorate and fade, significantly compromising driving safety. Traditional road marking quality inspection methods are inefficient and struggle to achieve high-performance, convenient detection. To address these challenges, this paper proposes an integrated framework for road marking detection and evaluation using Unmanned Aerial Vehicle (UAV) imagery. The framework comprises three core modules: lightweight data acquisition, efficient marking extraction, and accurate distress assessment. First, optimized UAV flight parameters enable low-cost, highly flexible, and safe data collection. Second, the YOLOv8-MEB model, combined with instance segmentation screening and local image optimization, achieves lane segmentation precision and recall above 90% with FPS exceeding 60. Furthermore, a standard marking template library is constructed, and a RANSAC-based template matching method with affine transformation is employed to restore intact marking shapes. A contour correction strategy is introduced to mitigate errors induced by construction inaccuracies. The proposed framework supports nine common types of road markings and yields approximately 10% error in distress ratio calculation under non-severe damage conditions, providing a practical technical reference for intelligent road maintenance.

13 October 2026 in Construction and Building Materials
Verified
Journal Article
Closed access
ZWZhaoyang Wang
Zhaoyang Wang
BGBOWEN GUAN
BOWEN GUAN
XZXin Zheng
Xin Zheng
Wangjie WuWangjie Wu
Wangjie Wu
AXAnhua Xu
Anhua Xu
TYTao Yang
Tao Yang