Wassim Boumerdassi

Dr. Wassim Boumerdassi

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 May 2025 in Energies
Verified
Journal Article
Open access
PDF file
WBWassim Boumerdassi
Wassim Boumerdassi
TCTommaso Campi
Tommaso Campi
SCSilvano Cruciani
Silvano Cruciani
FGFlavia Grassi
Flavia Grassi
Mauro FelizianiMauro Feliziani
Mauro Feliziani
The aim of this work is the design of a 200 W transmitting coil for a high-power wireless power transfer (WPT) system based on magnetic resonant coupling (MRC) to charge the battery of a drone in 1 h equipped with a WPT receiving coil integrated into the landing gear. This innovative solution is based on the use of the landing gear as the receiving coil, thereby obviating the need for an additional component (e.g., separate receiving coil). The proposed landing gear is fabricated from aluminum, to reduce weight, and to improve mechanical robustness and electrical performance. Consequently, the design reduces overall weight and system complexity while minimizing potential destabilization of the drone’s flight dynamics. However, a specific design of the primary coil is required to ensure high efficiency even in case of an inaccurate landing of the drone on a ground pad. To this aim, a double-D configuration is here proposed and optimized for the transmitting coil, while a double coil receiver in combination with a charge controller that uses a maximum power point tracking (MPPT) algorithm is integrated into the landing gear. The results obtained from the simulations demonstrate that the proposed WPT system has excellent electrical efficiency and very high tolerance to coil misalignment in terms of the coupling coefficient due to imprecise landing. The transmission efficiency of the final test prototype can reach 95% with a coupling coefficient of k = 0.16, and it can drop to a minimum of 85% when misalignment occurs resulting in k = 0.06.

3 September 2025 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
WBWassim Boumerdassi
Wassim Boumerdassi
TCTommaso Campi
Tommaso Campi
SCSilvano Cruciani
Silvano Cruciani
FGFlavia Grassi
Flavia Grassi
Mauro FelizianiMauro Feliziani
Mauro Feliziani
This paper investigates the weight and cost reduction of wireless power transfer (WPT) pads used in automotive applications to recharge the onboard battery of an electric vehicle (EV). To achieve this, the design focuses on reducing the ferrite in the pads. Different pad configurations are numerically investigated, and the results are used to define a ferrite reduction strategy while preserving WPT performance. Experimental prototypes of ferrite layers are presented.

6 February 2026 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
WBWassim Boumerdassi
Wassim Boumerdassi
TCTommaso Campi
Tommaso Campi
SCSilvano Cruciani
Silvano Cruciani
FGFlavia Grassi
Flavia Grassi
Mauro FelizianiMauro Feliziani
Mauro Feliziani
This study explores strategies to reduce the weight of copper windings and ferrite tiles in wireless power transfer (WPT) receiver coils for electric vehicles (EVs). Copper reduction is achieved by minimizing the number of coil turns, while ferrite reduction is accomplished through optimization of the ferrite layer shape. These measures significantly lower the receiver coil's weight and cost. The main challenge, however, lies in maintaining high power transfer efficiency. To address this, a double-sided LCC (Inductor-Capacitor-Capacitor) compensation topology is employed. Finite element field simulations and circuit-level analysis are used to design a receiver coil that minimizes the use of ferrite and copper, achieving a significant weight reduction (approximately 4 kg) while maintaining a power transfer efficiency of up to 96%.

7 April 2026 in IEEE Transactions on Electromagnetic Compatibility
Verified
Journal Article
Open access
WBWassim Boumerdassi
Wassim Boumerdassi
MKMarco KLINGLER
Marco KLINGLER
SCSilvano Cruciani
Silvano Cruciani
TCTommaso Campi
Tommaso Campi
FGFlavia Grassi
Flavia Grassi
Mauro FelizianiMauro Feliziani
Mauro Feliziani
Dynamic wireless power transfer systems for electric vehicles rely on magnetic field coupling between a roadway-embedded transmitter (Tx) and a vehicle-mounted receiver (Rx). While enabling efficient energy transfer, the radiated magnetic field raise concerns related to electromagnetic field (EMF) exposure and electromagnetic interference, particularly with implantable medical devices. Existing mitigation approaches such as conductive shields, magnetic materials, and passive reactive loops are limited by tradeoffs involving efficiency loss, added mass, cost, or insufficient control. This article presents a comprehensive methodology for active magnetic field compensation, based on a machine learning-assisted optimization of the electrogeometrical configuration of an additional compensation (or shielding) coil, connected in series with the Tx coil. The surrogate model guides the design to minimize leaked magnetic flux density in critical exposure zones while preserving power transfer efficiency above 90% under nominal load. Simulation results reveal that the proposed solution reduces peak flux density by up to 70% with a negligible efficiency penalty. The approach is validated through three-dimensional finite-element analysis and experimental prototypes.

20 April 2026 in IEEE Journal on Wireless Power Technologies
Verified
Journal Article
Open access
WBWassim Boumerdassi
Wassim Boumerdassi
SCSilvano Cruciani
Silvano Cruciani
TCTommaso Campi
Tommaso Campi
FGFlavia Grassi
Flavia Grassi
Mauro FelizianiMauro Feliziani
Mauro Feliziani
Dynamic wireless power transfer (DWPT) systems rely on high-frequency resonant inductive coupling to deliver energy to electric vehicles in motion. In short-track architecture, the sequential excitation of transmitter (Tx) coils produces intentional but spatially extended magnetic fields that may exceed exposure limits in lateral, pedestrian-accessible regions. Passive cancellation or shielding loops offer a low-complexity mitigation strategy. This work presents the electromagnetic design, modelling, and experimental validation of a passive, capacitively tuned cancellation loop integrated alongside each Tx coil. A full three-coil model (Tx – receiver (Rx) – cancellation coil) was developed to quantify the impact of loop geometry and compensation settings on magnetic-field suppression and on the electrical behavior of the DWPT link, showing that an optimized configuration can achieve a shielding effectiveness exceeding 15 dB in lateral regions of interest while maintaining a power transfer efficiency higher than 90%. A prototype was subsequently constructed, and the experimental measurements confirm the trend predicted by the numerical model, validating the achievable attenuation.

12 March 2026 in IEEE Journal on Wireless Power Technologies
Verified
Journal Article
Closed access
WBWassim Boumerdassi
Wassim Boumerdassi
Mauro FelizianiMauro Feliziani
Mauro Feliziani
TCTommaso Campi
Tommaso Campi
Valerio De SantisValerio De Santis
Valerio De Santis
This work investigates the electromagnetic field (EMF) safety of a realistic dynamic wireless power transfer (DWPT) system during charging operations of a moving electric vehicle (EV). Specifically, since the electrical time constant is much shorter than the kinematic time constant, different stationary positions of the DWPT coils were considered to represent vehicle motion under both aligned and misaligned configurations. A validated numerical methodology has been developed to accurately model the DWPT system and the vehicle configuration, enabling accurate prediction of the magnetic field generated during in-motion EV charging. The computed magnetic fields are compared with reference levels (RL) of international safety standards, showing compliance for a passenger inside the car, at least for the considered chassis material. Instead, RLs are exceeded in the extreme case of a bystander lying or walking near the car. For this reason, a dosimetric numerical analysis using detailed human body models is performed to assess induced quantities and verify compliance with basic restrictions. Future directions for reducing exposure and improving EMF safety are also provided.